Hi all, I have the following LUN which is showing OK with its two paths:
Now, I have instead this LUN, on the same server, which is a strange state:
Basically the paths are not aggregated as the LUN above, and I cannot understand why, to be honest. As you can see the Serial Number for that LUN is identical on both paths.
Any help is very welcome, thanks!
--
Diego
How can i remove LUN's from solaris 10 those are unmapped from SAN?
from storage side i got confirmation that they removed lun. but in my solaris box still it's visible.
i tried below.
root@globalares2.example.com #luxadm -e offline /dev/rdsk/c2t600D02310007D16C42FF09E24B5B8255d0s2... (7 Replies)
Hello,
I have Solaris 10 running on one of rack server with dual port FC card. Each port of FC card is connected to two switches respectively. I have been trying to test multipathing functionality with one of FC Storage.
While I have two storage controllers , each connected to the two switches... (2 Replies)
Hello,
I have Solaris 10 running on one of rack server with dual port FC card. Each port of FC card is connected to two switches respectively. I have been trying to test multipathing functionality with one of FC Storage.
While I have two storage controllers , each connected to the two switches... (0 Replies)
Hi,
I've noticed that mpathadm states that one of our luns has no active paths:
/dev/rdsk/c6t60000970000298700009533031324333d0s2
Total Path Count: 4
Operational Path Count: 4
/dev/rdsk/c6t60000970000298700009533031333037d0s2
... (3 Replies)
Hi, I have a question regarding HBA configuration. Here are the commands' output:
# cfgadm -al | grep fc
c1 fc-fabric connected unconfigured unknown
c2 fc connected unconfigured unknown
c5 ... (11 Replies)
i have lunix 5.4
i make script to tack the export from database 11g by oracle user
the oracle sheel is /bin/bash
when run this script display this error
./daily_xport_prod: line 36:
the daily_xport_prod script
#! /bin/sh
#
ORACLE_HOME=/u01/appl/oracle/product/11.2.0/db_1
export... (8 Replies)
Hi Gurus out there...
I am pondering over a situation where I have non-root access (user account), where I am trying to determine paths (including multipaths) on a host.
"luxadm display" seems very appropriate, but requires root access.
Is there anyway I can get the FC path information?
... (1 Reply)
I have a new SAN (Fujitsu Eternus 2000) and am trying to setup a veritas cluster on it, however veritas does not see all of the vluns I have exposed to the box. The OS does see them though. I have seen a lot of post about this, but it seems they are about people having just the opposite problem... (0 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)