Login or Register to Ask a Question and Join Our Community


Solaris

Qlogic 10G Ethernet adapter not working

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Qlogic 10G Ethernet adapter not working
# 1  
Old 06-08-2015
Qlogic 10G Ethernet adapter not working
Hi Community,

i have one issue with 10 fiber ethernet adapter.
here is my details:
Code:
root@new-bpel.example.com #dladm show-dev
bge0            link: unknown   speed: 0     Mbps       duplex: unknown
bge1            link: up        speed: 1000  Mbps       duplex: full
qlge2           link: down      speed: 10000 Mbps       duplex: full
qlge3           link: unknown   speed: 10000 Mbps       duplex: full

HBA Port WWN: 210000c0dd13c59f
        OS Device Name: /dev/cfg/c8
        Manufacturer: QLogic Corp.
        Model: QLE8142
        Firmware Version: 5.08.00
        FCode/BIOS Version:  BIOS: 2.14; fcode: 3.09; EFI: 3.20;
        Serial Number: RFC1001S62166
        Driver Name: qlc
        Driver Version: 141211-5.03
        Type: unknown
        State: offline
        Supported Speeds: 10Gb
        Current Speed: not established
        Node WWN: 200000c0dd13c59f

HBA Port WWN: 210000c0dd13c59d
        OS Device Name: /dev/cfg/c7
        Manufacturer: QLogic Corp.
        Model: QLE8142
        Firmware Version: 5.08.00
        FCode/BIOS Version:  BIOS: 2.14; fcode: 3.09; EFI: 3.20;
        Serial Number: RFC1001S62166
        Driver Name: qlc
        Driver Version: 141211-5.03
        Type: unknown
        State: offline
        Supported Speeds: 10Gb
        Current Speed: not established
        Node WWN: 200000c0dd13c59d

cfgadm -al is giving like it's connected:

Code:
c7                             fc           connected    unconfigured unknown
c8                             fc           connected    unconfigured unknown

i have installed latest patch : 149175-10

modules loaded too:

Code:
root@new-bpel.example.com #modinfo | egrep -ie "qlc|qlogic"
102 7b200000 2bf0d8 284   1  qlc (SunFC Qlogic FCA v141211-5.03)
134 7b72e000  1cf28 297   1  qlge (GLDv3 QLogic 81XX 140326-v1.18)

please help me to solve this issue

Regards,
Ben

---------- Post updated at 02:36 AM ---------- Previous update was at 12:12 AM ----------

This is what i am getting on /var/adm/messages

Code:
Jun  8 08:56:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:01:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:06:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:11:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:16:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:21:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:26:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:31:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:36:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:41:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:46:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:51:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:56:58 new-bpel.example.com last message repeated 1 time
Jun  8 10:01:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 10:06:58 new-bpel.example.com last message repeated 1 time
Jun  8 10:11:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 10:13:10 new-bpel.example.com last message repeated 1 time
Jun  8 10:21:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(2) firmware version: 1.35.11

# 2  
Old 06-08-2015
What is the hardware? Sparc or x86? What model?

Have you updated the boot code at all?

What FC switch is at the other end?
# 3  
Old 06-08-2015
Solaris 10. sparc

Not server is physically migrated and reconfigured with

Reboot -- -rv -mverbose

Card: Qle 8142
Switch : brocade
# 4  
Old 06-08-2015
So how did you install it? Boot code, driver, configuration, etc?

I have dealt the QLogic for many years and it is serious kit which is extremely well supported.

http://driverdownloads.qlogic.com/QL...olaris%20SPARC

The documentation here is comprehensive but generate a support ticket on this website if you have questions.
# 5  
Old 06-08-2015
card is sun/oracle OEM, so qlogic is not supporting.

already downloaded and installed latest SunWqlcnic from support.oracle.com and it's loaded in modinfo through forceload on /etc/system.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Red Hat

Red Hat 7 cannot recognize ethernet adapter

Hello community, I have a Proliant HP DL380P with the following network adapters: NetXtreme BCM5719 Gigabit Ethernet PCIe (Ethernet 1Gb 4-port 331FLR Adapter) 82580 Gigabit Network Connection (NC365T 4-port Ethernet Server Adapter) I installed Red Hat 7.2 but it recognizes only the... (9 Replies)
Discussion started by: Lord Spectre
9 Replies

2. AIX

How to check the ethernet status for vlan and lhea adapter in client servers?

Hi Techies, I have a doubt. ent0 Available Logical Host Ethernet Port (lp-hea) ent1 Available Logical Host Ethernet Port (lp-hea) ent2 Available Logical Host Ethernet Port (lp-hea) ent3 Available Logical Host Ethernet Port (lp-hea) ent4 Available... (4 Replies)
Discussion started by: jayadeava
4 Replies

3. Hardware

Need Sun 10-Gigabit Ethernet Adapter CD or ixge driver

Hi, Does anybody have a "Sun 10-Gigabit Ethernet Adapter installation CD" or driver ixge for Sun 10-Gigabit Ethernet PCI-X adapter? I need it but can't find it anywhere. So if you know where I can download it or purchase it, please let me know. (Already tried Oracle's website, don't have it) ... (5 Replies)
Discussion started by: Lhao
5 Replies

4. Red Hat

Ethernet Adapter not detected.

Hi, I have installed Oracle Enterprise Linux 5 in my PC. After the installation the Ethernet Card is not got detected. But I could able to get the details using the command lspci -a: 01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0). But I could... (4 Replies)
Discussion started by: chidhu.anu
4 Replies

5. AIX

Setting up an Integrated Virtual Ethernet adapter

All I am trying allocate an IVE to an LPAR (not a VIO) running AIX 7.1. I am getting the error: HSCL068A Explanation Logical port can not be assigned to Logical Partition because this Logical Partition is not the promiscuous LPAR for the physical port. Has anyone encountered this... (1 Reply)
Discussion started by: johnf
1 Replies

6. AIX

Temporarily disabling unused ethernet adapter

Hi, In our AIX 5.2 server , we have one unused ethernet adapter which doesn't have cable connection . For this interface , we are getting alerts in errpt . Could you suggesthow to stop this alert ? And sametime i would like to keep this device in ODM . Is there... (1 Reply)
Discussion started by: sekarsamy
1 Replies

7. Solaris

Solaris 10 - QLogic 4060C iSCSI adapter - multipathed (MPxIO)

System: Sun M3000 and M4000 OS: Solaris 10 (fully up to date with latest patches) iSCSI HBA: 2x QLE4060C (QLogic) In each system are 2 QLE4060C iSCSI adapters. I manage to set up both HBA's to connect to the LUNs on the SAN However I don't manage to enable multi-pathing. Made the... (4 Replies)
Discussion started by: sb008
4 Replies

8. Solaris

How to install ethernet adapter on Sun Sparc M4000

hi all, How to install onboard ethernet card on Sun SPARC M4000 server? (3 Replies)
Discussion started by: Tlg13team
3 Replies

9. Solaris

Ethernet Adapter Question

I have a Dual Boot system - XP with Solaris 10. I built the system from the ground up with different components and the Ethernet Card built into the Motherboard is a Marvell Yukon Gigabit Ethernet 10/100/1000 T-base, RJ-45 Copper. I am unable to go to the Web as the Ethernet Card is still not... (2 Replies)
Discussion started by: tubbyrana
2 Replies

10. UNIX for Dummies Questions & Answers

How to change the MAC adress in ethernet adapter for SUN

I have installed in the server a quad ethernet adapter, I'm using two interfaces with two different IP networks, both interfaces are connected to a switch, the switch report that is receiving the same MAC address in both ports so must of the times I have connectivity problems. Any idea to change... (1 Reply)
Discussion started by: mono673
1 Replies
Login or Register to Ask a Question