10 More Discussions You Might Find Interesting
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Discussion started by: goya
2. Shell Programming and Scripting
This command works
ggrep -v -F -x -f app1.txt app2.txt But, I don't have ggrep on SunOS Sparc so I tried using grep instead but it errors out
grep: illegal option -- F bash-2.03$ uname -a
SunOS mymac 5.8 Generic_Virtual sun4v sparc sun4v Can you help me with a grep command that... (6 Replies)
Discussion started by: mohtashims
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
I recently had issues with my new T2000 server. I purchased a new mainboard and swapped the CPU and DIMMs to the new board. Now when i power on the server im unable to do so. I get the following error:
‘SC Alert: Host system poweron failed due to fault at MB/FF_POK.'
When i do... (2 Replies)
Discussion started by: Caully
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
I'm trying to do an upgrade/install from Solaris 8 to Solaris 10 on a SUN Sparc system.
I halt the system, as documented, but when I attempt to boot off the distribution DVD; i.e.
OK> boot cdrom
The system indicates that the device is 'unrecognizable'
These are SUN... (5 Replies)
Discussion started by: imagtek
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Discussion started by: DundeeDancer
Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems.
/var file system (/dev/md/rdsk/d425) is being checked.
run fsck -F ufs /dev/md/rdsk/d425
... (8 Replies)
Discussion started by: webster5u
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
Boot device:... (2 Replies)
Discussion started by: Mwamba
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Discussion started by: soliberus