Network routing


 
Thread Tools Search this Thread
Operating Systems Solaris Network routing
# 8  
Old 10-18-2014
@jlliagre.....yes, good point, thanks.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and... (4 Replies)
Discussion started by: moshesa
4 Replies

2. IP Networking

Test Network Routing Issues (FREEBSD and RHEL)

Hello, I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the... (0 Replies)
Discussion started by: shadyuk
0 Replies

3. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

4. IP Networking

Test network routing algourithm

hi, I've wrote my own network routing algorithm in java, now i wanna test it and see if it works correctly, also i wanna test it's performance in comparison with other network routing algorithms like RIP. can anyone tell me how can i do this? is there any simulator or something for network routing... (0 Replies)
Discussion started by: gongotar
0 Replies

5. IP Networking

Routing traffic problem between 3G and Office Lan Network

Hi, I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't... (0 Replies)
Discussion started by: jao_madn
0 Replies

6. Solaris

Network cards - Routing

Hi all I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem. So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1).... (2 Replies)
Discussion started by: sbk1972
2 Replies

7. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no... (1 Reply)
Discussion started by: old noob
1 Replies

8. UNIX for Dummies Questions & Answers

Need help to configure routing on home network

I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing. If have always on broadband from BT. My router ipaddress is: 192.168.1.1 This router uses DHCP. My Laptop Ip is as follows: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :... (2 Replies)
Discussion started by: Kongowea
2 Replies

9. IP Networking

Routing Network Traffic With Mandrake

I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"... (1 Reply)
Discussion started by: Deuce
1 Replies
Login or Register to Ask a Question
srconfig(8)						      System Manager's Manual						       srconfig(8)

NAME
srconfig - Displays and controls source routing functions and parameters for communication on token ring networks SYNOPSIS
/usr/sbin/srconfig [options] OPTIONS
The options are case insensitive; use uppercase, lowercase, or any combination. The short form of each option is indicated by capital let- ters. For example -DElentry can be shortened to -de and -Enasr can be shortened to -e. Deletes the entry in the source routing database for the destination (target) node that has the address mac_address. This option requires superuser privileges. Disables the entry in the source routing database for the destination (target) node that has the address mac_address, marking the entry as Stale. The system attempts to update the entry through its route discovery process the next time it needs to communicate with this node. This option requires supe- ruser privileges. Displays whether source routing is enabled. If enabled, it also displays the following source routing attributes whose values you can set with the other srconfig options. Current Source Routing Aging Timer value Current Source Routing Discovery Timer value Current Source Routing Table size Displays the following counters that are associated with the source routing database: All Routes Explore (ARE) frames sent ARE frames received Route discovery failures Displays the entry for the node with address mac_address in the source rout- ing database. Each entry describes the current description of the best path to the node. There is no default value for mac_address. Dis- plays all entries in the source routing database. (See -re option.) Sets the value of the Source Routing Aging Timer, specifying the length of time a source routing table entry remains valid before being marked as invalid or Stale. If not set, the system default is 120 seconds. This option requires superuser privileges. Sets the value of the Source Routing Discovery Timer, specifying the amount of time a route discovery process can take before it terminates. If not set, the system default is 5 seconds. This option requires superuser privi- leges. Sets the maximum number of entries in the source routing database. The range of this parameter is a multiple of 256 from 1024 to 2048. If not set, the system default is 1024. This parameter can only be increased, not decreased. This option requires superuser privi- leges. Specifies that the MAC addresses are in non-canonical form. This option can be used with the -DElentry, -DISEntry, -REntry, and -RTable options only. Sets the source routing counters to zero. DESCRIPTION
The srconfig command reads and modifies entries in the your local system's source routing database. For every remote system on an extended token ring network with which your local system communicates, there exists a corresponding entry in your local system's source routing database. Each entry describes the path to the remote system on the network. Source routing is the mechanism by which data transmitted from your local node reaches remote systems on other token ring LANs. Your sys- tem maintains a source routing database so token ring adapters, for example tra0, can find the route a message is to take to a remote des- tination. The entries list the specific token ring LANs (and their interconnecting bridges) that the data is to traverse to the remote system. To maintain its source routing database, your system frequently executes a route discovery process to find the most efficient route to each remote system. The route discovery process and source routing itself are largely automatic. However, you can use the srconfig commands to manually change the source routing database entries. You need superuser privileges to use the srconfig options, except for the read options. EXAMPLES
To display all the entries in your source routing database, enter: srconfig -rt Target Node MAC Address 00-00-0C-01-08-E9 (ip = 130.180.4.3) Have Route Routing Information: SRF, length 8, direction 0,largest frame 4472 octets Route Descriptors: 021C 7FFC 0220 0000 0000 0000 0000 0000 Target Node MAC Address 00-00-C9-10-1B-F5 On Ring To display the source routing database entry that applies to a destination node with address 00-00-c9-10-4a-f3, enter: srconfig -re 00-00-c9-10-4a-f3 Target Node MAC Address 00-00-C9-10-4A-F3 On Ring To specify a time period of 10 seconds during which your system runs the route discovery process for its target nodes, enter: srconfig -setd 10 SEE ALSO
Network Administration Network Programmer's Guide srconfig(8)

Featured Tech Videos