Update OpenBoot Prom from CD


 
Thread Tools Search this Thread
Operating Systems Solaris Update OpenBoot Prom from CD
# 1  
Old 01-30-2014
Sun Update OpenBoot Prom from CD

Hello,

I have a sun v880 that i got from ebay for cheap as a way to to learn Solaris and sun hardware in general.

The machine currently has OBP 4.7.0 2002/10/25 and i was wondering if there was a way to update the prom with out and active solaris install, as currently when i proceed with the solaris 10 is gets stuck at 50% when it says "Loading install media, please wait... "This occurs after the initial parameter setup (like language and hostname) but before the actually slected what packages and other instal settings are chosen.

I believe this may be related to the obp being out of date but im not sure.
And a follow up question would be if updating the obp doesn't solve the 50% loading problem, than where should i look next?

Thanks for your help
# 2  
Old 01-30-2014
Can you boot to single user mode from CD/DVD? If so, you will also be able to update the OBP.
# 3  
Old 01-31-2014
I can boot into single user mode but how do I move the update utility tool onto the live system. I tired switiching the disks but machine wont allow the ejection of the disk.

Thanks.

---------- Post updated at 11:20 PM ---------- Previous update was at 08:22 PM ----------

ok so i booted into single user mode and tried running the update utility from a flash drive but the single user mode makes the file system read only, thus it does not update

Then i moved the file (lash-update-SunFire880-latest) to the root of disk i mounted and then i set it chmod 755 as recommended in the readme however when i type "boot disk /flash-update-SunFire880-latest" at the ok prom it says "file just loaded does not seem executable" any idead what is going on, or if could make the single user mode read and write since it running in memory
# 4  
Old 01-31-2014
As far as I remember, you don not need to boot the update file anymore. There should be a script to install the update without rebooting the server. Please check the patch readme for further instructions.
Another thing you might want to check is the software version of your ALOM/RSC card in the server. Sometimes a missmatch between firmware levels of OBP and ALOM/RSC can create problems...
# 5  
Old 01-31-2014
You have Solaris 10 media but which revision? Is it an older version which uses "boot archive"? (That's prior to 10u3).

There are two ways to update firmware; from the system processor SC> prompt without Solaris running, or from Solaris # prompt with Solaris running. Booting into single user means that Solaris is running.

One really handy utility is "sysfwdownload" introduced in latter years (Google that). That is a Solaris utility that will download the new firmware file directly inot the Service Processor and "park" it there in reserved space. When you reboot the SC it notices the new file and asks whether you want it flashed in. If you say yes, everything is done for you.

With the SC only method you can download the new firmware from a tftp server. Do you have one of those or can you quickly build one?

Reading your post and the specific error message that you posted, take a look at this link near the bottom. If the Solaris 10 is prior 10u3 there's other steps needed.
Upgrading OBP and ALOM on a SunFire v210/v240 Weblog for Thomas S. Iversen

Good luck. Let us all know how you get on. Continue to post your questions.

---------- Post updated at 12:46 PM ---------- Previous update was at 12:12 PM ----------

And also..............

When you talk about the file "flash-update-SunFire880-latest" where did you get that? I seem to remember that when you download (from the internet) a firmware upgrade it comes in zip form and you need to unpack it and then set permissions on the file(s) to 755. I think that often there is more than one file unpacked from the zip and you need to set any/all to 755.

Can anybody confirm that please?
# 6  
Old 01-31-2014
@hicksd8 i am using Solaris 10 update 8 on dvd
the firmware patch upgrade # is 119231-01 (dated Apr/29/2005), which i found searching on the web, as i dont have a Oracle support id or contract as I am a hobbyist (however if you or you know anyone that does have access, maybe you could get the most recent patches or tools to update, or id be willing to pay oracle like 200-300$ just for acces to the v880 eol stuff, but im not sure who to talk to)

@DukeNuke2 the zip file contains both a file that you can run when your at unix prompt and the other file you run from boot at the ok prompt.

When i boot into the single user mode (from the dvd, I dont have Solaris installed on any disk) it creates a ramdisk file system that is read only, thus when i run the shell scrip to update the machine it complain that it cant modify certain directories "could not find a writable driver location" maybe i actually wasn't as root and made an error?

Also im not sure the v880 has a service processor, it has a rsc card (which i can remove, but ive read that its configured from Solaris and really only does power control and ttyb emulation, not prom upgrading and such altough im not an expert) so im not sure if the sysfwdownload will work.

I still think running the update from Solaris is the best way. Just to double check and see if i was wrong last night when i run something as root do i type su [enter] and then all commands after that are executed with root permissions, or is su {command} [enter]?

Because if its the second one then that would explain why it may not have worked, il double check tonight when i try again

Thanks for your help
# 7  
Old 01-31-2014
Let's clarify please..........

You want to upgrade firmware because you can't install Solaris on a hard disk in the system?

You ask for confirmation about root access (su) but if you boot into single user:

Code:
boot cdrom -s

then you are root (# prompt). In single user you can't be anything else.

With regards to the install hanging at 50%, where did you get the media from? Is it a DVD that you burned yourself? If so, have you tried another one?
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Openboot does not display

Hey guys I just inherited a sun netra 210 from an old Avaya system we had setup and I want to use i for studying for my SCSA/OCA exams but I'm running into alot of problems installing SOL 10 on here. I have no experience with SUN hardware at all but familiar with Solaris. It has SOL 9 but no one... (7 Replies)
Discussion started by: blackmantis
7 Replies

2. Solaris

OpenBoot Simulator

Hi, I would like to know if it's possible find a openboot simulator for solaris to can practice some exercices Thanks a lot and sorry for my english! (11 Replies)
Discussion started by: mierdatuti
11 Replies

3. Shell Programming and Scripting

prom in deleting a pattern

hi guys, i have a directory.inside that so many directories and files are there.i want to search the complete directory for a pattern in all the .txt files.if i will find that pattern then i want to delete that pattern from that file. please help me out. i want it urgent (18 Replies)
Discussion started by: suvendu4urs
18 Replies

4. Solaris

upgrading Openboot PROM

Hi there, I have a Sunfire v210 running solaris 8 and the PROM banner shows that the openboot version is 4.11.4, I have nbeen asked to make sure that the PROM is at the latest version. Does anybody know the procedure for upgrading openboot, and indeed , where i can get the software from any... (6 Replies)
Discussion started by: hcclnoodles
6 Replies

5. Solaris

Get openboot version without going to PROM

Hi there How do i get the openboot version from within solaris 8-sparc. i cant seem to run "banner" or ".version" using eeprom cheers (2 Replies)
Discussion started by: hcclnoodles
2 Replies

6. Solaris

Disable Network cards under boot Prom

Hi, I'm looking for a command to be able to disable a network card under the boot PROM. I need it to force my Jumpstart to use the Ethernet card of my server (V880) instead of my fiber card (gem0). Thanks, Fabien (6 Replies)
Discussion started by: unclefab
6 Replies

7. UNIX for Dummies Questions & Answers

PROM password for UNIX workstation.

Can someone give me the reason why PROM passwords are put on UNIX machines??? Is there a genuinely good, sane and reasonable decision for this??? (1 Reply)
Discussion started by: Kanu77
1 Replies

8. UNIX for Advanced & Expert Users

PROM password

I have a query. Its about the PROM password on a SUN ULTRA5. I am the administrator of a UNIX network, which is actually a private network within the company that I work for. The IT department who supplied the workstations will not remove the PROM passwords - I need it removed in order to do... (1 Reply)
Discussion started by: Kanu77
1 Replies

9. UNIX for Advanced & Expert Users

Having PROM Env remotely !

My workstation's graphic card had problem so unitl it's fixing if i want to have PROM env & run some commands like OK probe-scsi or ..... what should i do ? Rgrds Nikk (1 Reply)
Discussion started by: nikk
1 Replies

10. UNIX for Dummies Questions & Answers

Prom

Is there any place where i can look for the commands that can be used on the ok> prompt (3 Replies)
Discussion started by: Jai
3 Replies
Login or Register to Ask a Question

Featured Tech Videos