10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have Sun Solaris V440, every two days or so, the system crashes and it's at OK prompt. After that I do the FSCK and clear all the bad sectors. Then system stays up for close to 48 hours. Then it crashes again. I checked the logs and I don't see anything under /var/adm/messages file.
... (1 Reply)
Discussion started by: samnyc
1 Replies
2. Solaris
Dear friends,
I have the DVD image of solaris 10 but I don't have DVD writer to burn it onto a dvd R. I was wondering if I could install Solaris from my 4gb usb flash drive as my PC supports booting from usb. I have installed Windows 7 this way recently, I have no idea about Solaris. Could you... (2 Replies)
Discussion started by: gabam
2 Replies
3. Solaris
I have a Sun SunFire v440 server with a hard drive in each slow. When I run "iostat -En", "format", and "cfgadm -al", 3 of the drives show up, but the one in Slot 1( which should be c1t1d0 ) is nowhere to be found.
However, when I go to the rack its in an watch the activity lights, it seems... (2 Replies)
Discussion started by: the.gooch
2 Replies
4. Solaris
Hello,
I've a very weird problem with one of the machines. When I try to boot off a working DVD that I used to install another system with it spits out the following message:
Sun Fire V440, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.33, 8192 MB... (14 Replies)
Discussion started by: stoci
14 Replies
5. Solaris
Hi
I had installed Sun Solaris 10 on my dell vostro 1400.Problem is iam unable to mount the usb drives as there was no detections at all.And also iam unable to find my network interface or iam not able to install the network card.
If try to type ifconfig -a
It is showing only loop back... (4 Replies)
Discussion started by: testerindia25
4 Replies
6. Solaris
I have a T2000 server running solaris 10, it has 4 USB ports. I want to extend the storage capacity by attaching an external USB drive and mounting it as an other mount point.
How do I do that, the following link gives information about USB in Solaris OS, ... (1 Reply)
Discussion started by: Tirmazi
1 Replies
7. Solaris
Hi-
I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform.
I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Discussion started by: agfa_109
3 Replies
8. Solaris
Is there a way to install Solaris 10 x86 with an external DVD drive that connects through the USB port? I would think I would run GRUB off of a floppy disk and somehow use that to make it look to the USB port to boot from but I don't know how to do that. Can anyone help me out? (1 Reply)
Discussion started by: Bradj47
1 Replies
9. Solaris
Hi Friends,
My solaris box V440 got stucked. I couldn't accessit from the remote console. Finally i restarted the box.
Can you tell me what are the ways we can find out the issues
and what are the logs we can check other than /var/log/messages.
Thanks
Jinu (1 Reply)
Discussion started by: Jinu
1 Replies
10. SCO
Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 . (5 Replies)
Discussion started by: sureshdrajan
5 Replies
MPII(4) BSD Kernel Interfaces Manual MPII(4)
NAME
mpii -- LSI Logic Fusion-MPT Message Passing Interface II
SYNOPSIS
mpii* at pci? dev ? function ?
DESCRIPTION
The mpii driver provides support for storage controllers using the LSI Logic Fusion-MPT Message Passing Interface II family of chipsets:
- LSISAS2004, LSISAS2008
These chipsets can be found on the following controllers:
- Dell PERC H200
- LSI SAS 9200-8e, SAS 9211-4i, SAS 9211-8i
Some models of these controllers have varying degrees of support for RAID 0 and RAID 1.
mpii supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.
EVENTS
The mpii driver is able to send events to powerd(8) if a logical drive in the controller is not online. The state-changed event will be sent
to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO
intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)
HISTORY
The mpii driver first appeared in OpenBSD 4.7.
AUTHORS
The mpii driver was written by James Giannoules and Mike Belopuhov.
BUGS
The chips supported by mpii do not use a SCSI-like identifier. Instead they use an opaque ID and leave discovery order up to the operating
system. The code to handle this is currently not implemented and therefore it is not a good idea to run this driver on a multi-boot machine
or with more than 1 drive.
BSD
April 19, 2012 BSD