solaris boot problem boot error loading interpreter(misc/krtld)


 
Thread Tools Search this Thread
Operating Systems Solaris solaris boot problem boot error loading interpreter(misc/krtld)
# 1  
Old 08-17-2005
solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.

cannot find mis/krtld
boot error loading interpreter(misc/krtld)
elf32 read error
load error read of platform/i86pc/kernel/unix failed.
boot path /pci@0,0/pci-ide@1f,1/ide0/cmdk@0,0:a

I have been trying to reinstall with many option like formatting with windows fdisk, linux installer everything as I saw somewhere that disk needs low level format.

I have googled but could not find any solution..

When I try to format disk using windows this is the information gathered
Partition1 (solarisboot) 12 MB
partition2 unknown 152610

Hardware

pentium4 2.4 GHZ
1Gb DDR memor
Intel Original mother board.
140 Gb hard disk

Installation

install type 3 (tried other options as well)

Entire disk for boot and Solaris
accepted almost all default parameters.

downloaded again , burned a DVD still same.

Any help will be highly appreciated, as I have been trying out everything I could find, also I really want to learn to use Solaris
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Problem boot Solaris

Hi I have a problem on a server, when he boot I have this type of message loop, do you know what it corresponds to ? ( requesting internet Adress for 0:3:ba:fa:33:91 ) Regards Sun Fire V240, No Keyboard Copyright 2007 Sun Microsystems, INC. All rights reserved. openboot 4.22.33,... (10 Replies)
Discussion started by: yoyo-tns
10 Replies

2. Solaris

Solaris 10 boot problem - ERROR: Last Trap: Fast Data Access MMU Miss

Hello, We have a T5140 server with Solaris 10 and its suddenly throwing "segmentation core" when I login into the server and not showing any output for commands like df, mount etc. so I had to reboot the server to fix this issue. Please note that there's no boot disk mirroring. But... (2 Replies)
Discussion started by: prvnrk
2 Replies

3. Solaris

Solaris stuck during boot after reconfigure boot

Hello, I have a problem with my machine that won't boot properly. The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)
Discussion started by: Zorken
18 Replies

4. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies

5. SCO

stage 1 boot failure: error loading hd (40)/boot

hi SCO Unix 5.0.6 doesn't boot due to this problem: not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies

6. Solaris

Solaris boot problem

Hi All We have the Sun Solaris server ... Got a power cut suddenly .... Crash happened to the system almost You can access through Termnl .. But it seems he did not boot ... How to Make the process of the boot correctly without losing information Thanks for all (3 Replies)
Discussion started by: gogo888
3 Replies

7. Solaris

Solaris 10 - boot CD not loading

I recently downloaded solaris 10 disk images and I am trying to load it onto my system. I cannot get the PC to load off of the disk 1 image. I created the disk using windows easy cd creator just like the download instructions said, but i get a boot failure. :eek: Any ideas??? ( BIOS ok !!! ) ... (10 Replies)
Discussion started by: spider123
10 Replies

8. UNIX for Advanced & Expert Users

V480 w/ Solaris 9 boot problem

Our V480 w/ Solaris 9 would not boot properly. After recreating the LUNs on our StorEdge A1000, and then performing a reboot, the machine just keep cycling through the boot process. No error messages, it keeps trying to reboot over and over again. Any ideas? We managed to do a stop+a and... (6 Replies)
Discussion started by: xnightcrawl
6 Replies

9. UNIX for Advanced & Expert Users

Solaris boot problem

I couldnt get my hands on my solaris 2.6 cd soo i used solaris 7 cd to boot to single user mode. I typed boot cdrom -s it bought me to my root prompt , but when i typed fsck.....nothing happened. It was as though it couldnt go ahead with fscking. it just bought up the prompt again,... (1 Reply)
Discussion started by: lealyz
1 Replies

10. UNIX for Dummies Questions & Answers

Loading windows on a dual boot

I want to dual-boot Windows 98 and Redhat 7. My scheme for doing this is to partition into: A FAT32 partition for windows A Linux partition for root A swap partition A boot partition My question is: At what point do I setup windows on the FAT partition? Would I do it from the command line... (5 Replies)
Discussion started by: Furtoes00
5 Replies
Login or Register to Ask a Question
install-solaris(1M)													       install-solaris(1M)

NAME
install-solaris - install the Solaris operating system SYNOPSIS
install-solaris install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation, install-solaris invokes either a text-based installer or a graphical installer. The following minimum requirements for physical memory dictate which features are available during installation: For SPARC machines: 128 MB Minimum physical memory for all installation types 128 MB Minimum physical memory required for windowing system 384 MB Minimum physical memory required for graphical-based installation For x86 machines: 256 MB Minimum physical memory for all installation types 256 MB Minimum physical memory required for windowing system 512 MB Minimum physical memory required for graphical-based installation In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea- tures available. install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more details. install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the installation media. Refer to the for disk space requirements. Refer to the for more information on the various menus and selections. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcdrom (Solaris instal- | | |lation media) | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ pkginfo(1), install(1M), pkgadd(1M), attributes(5) It is advisable to exit install-solaris by means of the exit options in the install-solaris menus. 23 Sep 2005 install-solaris(1M)