No network cable But Network interface is UP and Running


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems Solaris No network cable But Network interface is UP and Running
# 1  
No network cable But Network interface is UP and Running

I've one Netra 240

After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces.

I tried to restart and plumb/unplumb with no luck.


Code:
ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000 
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.148.2 netmask ffffff00 broadcast 192.168.148.255
        ether 0:3:ba:bc:f:5 
bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.148.3 netmask ffffff00 broadcast 192.168.148.255
bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
        ether 0:3:ba:bc:f:6

Please let me know if someone can help.

Best Regards
# 2  
What does this show:
Code:
dladm show-dev

# 3  
Hello

it's Solaris 8, there is no: dladm command Smilie


Many thanks
# 4  
Did you try reconfiguration reboot? If not, boot to OBP and run
Code:
boot -r

# 5  
Hello

still the same Smilie

Code:
{0} ok boot -r

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set
Probing system devices
Probing memory
Probing I/O buses

Netra 240, No Keyboard
Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.22.23, 2048 MB memory installed, Serial #62656261.
Ethernet address 0:3:ba:bc:f:5, Host ID: 83bc0f05.



Rebooting with command: boot -r                                       
Boot device: /pci@1c,600000/scsi@2/disk@0,0  File and args: -r
SunOS Release 5.8 Version Generic_117350-51 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Hardware watchdog enabled
SC unretrieved msg AUG 06 16:55:32 2012 UTC [CRITICAL ALARM is set]
SC unretrieved msg AUG 06 16:55:42 2012 UTC [CRITICAL ALARM is set]
configuring IPv4 interfaces: bge0 bge0:1 bge1.
Hostname: external-speedtest
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up.  Please wait.
starting rpc services: rpcbind done.
# Starting AIC Server Agent for Network Registrar
Setting netmask of bge0 to 255.255.255.0
Setting netmask of bge0:1 to 255.255.255.0
Setting netmask of bge1 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway external-speedtest
syslog service starting.
syslogd: line 31: unknown priority name "err @nbmtcfm"
syslogd: line 32: unknown priority name "err @nbmtcfm2"
syslogd: line 33: unknown priority name "err @nbmtcfmdev"
Print services started.
volume management starting.
starting tomcat
Using classpath: /jakarta-tomcat-3.3.1a/bin/../lib/tomcat.jar
Using JAVA_HOME: /usr/bin/..
Using TOMCAT_HOME: /jakarta-tomcat-3.3.1a/bin/..
Aug  6 19:56:59 external-speedtest picld[84]: SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
Aug  6 19:56:59 external-speedtest picld[84]: SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
The system is ready.
Aug  6 19:57:00 external-speedtest snmpXdmid: Error in Adding Row for Subscription Table Entry
Aug  6 19:57:00 external-speedtest snmpXdmid: Failed to add filter to SP for Event delivery

external-speedtest console login: 2012-08-06 19:57:03 - SessionIdGenerator: Opening /dev/urandom
2012-08-06 19:57:03 - ServerXmlReader: Config=$TOMCAT_HOME/conf/server.xml
2012-08-06 19:57:03 - PathSetter: home=/jakarta-tomcat-3.3.1a
2012-08-06 19:57:03 - ContextXmlReader: Context config=$TOMCAT_HOME/conf/apps-127.0.0.1.xml
2012-08-06 19:57:03 - ContextXmlReader: Context config=$TOMCAT_HOME/conf/apps-admin.xml
2012-08-06 19:57:03 - ContextXmlReader: Context config=$TOMCAT_HOME/conf/apps-examples.xml
2012-08-06 19:57:03 - AutoWebApp: Loaded from config: DEFAULT:/admin
2012-08-06 19:57:03 - AutoWebApp: Auto-Adding DEFAULT:/
2012-08-06 19:57:03 - AutoWebApp: Loaded from config: DEFAULT:/examples
2012-08-06 19:57:03 - ContextManager: Tomcat configured and in stable state 
2012-08-06 19:57:03 - ContextManager: Adding  DEFAULT:/admin
2012-08-06 19:57:03 - ContextManager: Adding  DEFAULT:/examples
2012-08-06 19:57:03 - ContextManager: Adding  DEFAULT:/ROOT
EmbededTomcat: Init time 1591
2012-08-06 19:57:04 - Http10Interceptor: Starting on 80
2012-08-06 19:57:04 - Ajp12Interceptor: Starting on 8007
2012-08-06 19:57:04 - Ajp13Interceptor: Starting on 8009
EmbededTomcat: Startup time 62
Aug  6 19:57:06 external-speedtest picld[84]: SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
Aug  6 19:57:06 external-speedtest picld[84]: SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR

external-speedtest console login: 
external-speedtest console login: root
Password: 
Aug  6 19:59:08 external-speedtest login: ROOT LOGIN /dev/console
Last login: Mon Aug  6 14:19:31 on console
Sourcing //.profile-EIS.....
#


Code:
 ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000 
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.148.2 netmask ffffff00 broadcast 192.168.148.255
        ether 0:3:ba:bc:f:5 
bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.148.3 netmask ffffff00 broadcast 192.168.148.255
bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
        ether 0:3:ba:bc:f:6

# 6  
Try moving /etc/hostname.* files to /export/home or somewhere else for backup. Then restart. Also post output of:
Code:
prtdiag -v
prtconf

# 7  
Hello


Here is the output:

Code:
root@external-speedtest -> grep net /etc/path_to_inst 
"/pci@1f,700000/network@2" 0 "bge"
"/pci@1f,700000/network@2,1" 1 "bge"
"/pci@1d,700000/network@2" 2 "bge"
"/pci@1d,700000/network@2,1" 3 "bge"
root@external-speedtest -> prtdiag -v
System Configuration: Sun Microsystems  sun4u Netra 240
System clock frequency: 160 MHZ
Memory size: 2GB        

==================================== CPUs ====================================
                      E$          CPU     CPU       Temperature         Fan
       CPU  Freq      Size        Impl.   Mask     Die    Ambient   Speed   Unit
       ---  --------  ----------  ------  ----  --------  --------  -----   ----
     MB/P0  1280 MHz  1MB         US-IIIi  2.4       -        -    
     MB/P1  1280 MHz  1MB         US-IIIi  2.4       -        -    

================================= IO Devices =================================
     Bus   Freq
Brd  Type  MHz   Slot        Name                          Model
---  ----  ----  ----------  ----------------------------  --------------------
 0   pci    66           MB  pci108e,1648 (network)                           
 0   pci    66           MB  pci108e,1648 (network)                           
 0   pci    33           MB  isa/su (serial)                                  
 0   pci    33           MB  isa/su (serial)                                  
 0   pci    33           MB  pci10b9,5229 (ide)                               
 0   pci    66           MB  scsi-pci1000,21 (scsi-2)                         
 0   pci    66           MB  scsi-pci1000,21 (scsi-2)                         
 0   pci    66           MB  pci108e,1648 (network)                           
 0   pci    66           MB  pci108e,1648 (network)                           
 0   pci    33            7  isa/rmc-comm-rmc_comm (seria+                    

============================ Memory Configuration ============================
Segment Table:
-----------------------------------------------------------------------
Base Address       Size       Interleave Factor  Contains
-----------------------------------------------------------------------
0x0                2GB               2           BankIDs 0,1

Bank Table:
-----------------------------------------------------------
           Physical Location
ID       ControllerID  GroupID   Size       Interleave Way
-----------------------------------------------------------
0        0             0         1GB             0,1
1        0             0         1GB             

Memory Module Groups:
--------------------------------------------------
ControllerID   GroupID  Labels
--------------------------------------------------
0              0        MB/P0/B0/D0,MB/P0/B0/D1

============================ Environmental Status ============================
Fan Speeds:
-----------------------------------------
Location       Sensor      Status   Speed
-----------------------------------------
MB/P0/F0       RS          okay     4245 rpm         
MB/P0/F1       RS          okay     4115 rpm         
F2             RS          okay     4470 rpm         
PS0            FF_FAN      okay         
PS1            FF_FAN      okay         
---------------------------------
Keyswitch:
---------------------------------
Location       Keyswitch   State
---------------------------------
--------------------------------------------------
Led State:
--------------------------------------------------
Location   Led                   State       Color
--------------------------------------------------
MB         ACT                   on          green           
MB         SERVICE               off         amber           
MB         LOCATE                off         white           
PS0        ACT                   on          green           
PS0        SERVICE               off         amber           
PS0        OK2RM                 off         blue            
PS1        ACT                   on          green           
PS1        SERVICE               off         amber           
PS1        OK2RM                 off         blue            
HDD0       SERVICE               off         amber           
HDD0       OK2RM                 off         blue            
HDD1       SERVICE               off         amber           
HDD1       OK2RM                 off         blue            
-------------------------------------------------------------------
Temperature sensors:
-------------------------------------------------------------------
Location       Sensor      Temperature  Lo LoWarn HiWarn  Hi Status
-------------------------------------------------------------------
MB             T_ENC           27C     -9C   -7C   57C   60C okay
MB/P0          T_CORE          76C     -     -    110C  115C okay
MB/P1          T_CORE          58C     -     -    110C  115C okay
PS0            FF_OT           -       -     -     -     -   okay
PS1            FF_OT           -       -     -     -     -   okay
------------------------------------------------------------------------
Voltage sensors:
------------------------------------------------------------------------
Location   Sensor        Voltage  Lo     LoWarn  HiWarn   Hi    Status
------------------------------------------------------------------------
MB         V_VTT          1.31V       -     1.17V   1.43V     -   okay
MB         V_GBE_+2V5     2.51V       -     2.25V   2.75V     -   okay
MB         V_GBE_CORE     1.21V       -     1.08V   1.32V     -   okay
MB         V_VCCTM        2.54V       -     2.25V   2.75V     -   okay
MB         V_+2V5         2.61V       -     2.34V   2.86V     -   okay
MB         V_+1V5         1.51V       -     1.35V   1.65V     -   okay
MB/BAT     V_BAT          3.03V       -     2.70V     -       -   okay
MB/P0      V_CORE         1.48V       -     1.26V   1.54V     -   okay
MB/P1      V_CORE         1.48V       -     1.26V   1.54V     -   okay
PS0        FF_UV            -         -       -       -       -   okay
PS0        FF_OV            -         -       -       -       -   okay
PS0        P_PWR            -         -       -       -       -   okay
PS1        FF_UV            -         -       -       -       -   okay
PS1        FF_OV            -         -       -       -       -   okay
PS1        P_PWR            -         -       -       -       -   okay
----------------------------------------------------------------------
Current sensors:
----------------------------------------------------------------------
Location   Sensor      Current    Lo     LoWarn  HiWarn   Hi    Status
----------------------------------------------------------------------
MB         FF_SCSI      -         -       -       -       -   okay
PS0        FF_OC        -         -       -       -       -   okay
PS1        FF_OC        -         -       -       -       -   okay

======== FRU Status =========
-------------------------
Fru Operational Status:
-------------------------
Location        Status   
-------------------------
MB/SC           okay
PS0             okay
HDD0            present
HDD1            present
PS1             okay

================================ HW Revisions ================================
ASIC Revisions:
---------------
pci: Rev 4
pci: Rev 4
pci: Rev 4
pci: Rev 4

System PROM revisions:
----------------------
OBP 4.22.23 2006/11/27 04:43 Sun Fire V210/V240,Netra 210/240
OBDIAG 4.22.23 2006/11/27 05:01  
root@external-speedtest -> prtpicl -c network -v
  network (network, 2f60000015f)
  :_fru_parent   (2f60000072bH) 
  :DeviceID      0x2 
  :UnitAddress   2 
  :vendor-id     0x14e4 
  :device-id     0x1648 
  :revision-id   0 
  :subsystem-vendor-id   0x108e 
  :subsystem-id  0x1648 
  :class-code    0x20000 
  :interrupts    00  00  00  01 
  :min-grant     0x40 
  :max-latency   0 
  :cache-line-size       0x10 
  :latency-timer         0x40 
  :devsel-speed  0x1 
  :fast-back-to-back
  :66mhz-capable
  :device_type   network 
  :address-bits  0x30 
  :max-frame-size        0x10000 
  :reg  
 00  00  10  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00 
 03  00  10  10  00  00  00  00  00  00  00  00  00  00  00  00  00  20  00  00 
 03  00  10  18  00  00  00  00  00  00  00  00  00  00  00  00  00  01  00  00 
  :compatible   (2f60000016aTBL) 

   | pci14e4,1648.108e.1648.0 |
   | pci14e4,1648.108e.1648 |
   | pci108e,1648 |
   | pci14e4,1648.0 |
   | pci14e4,1648 |
   | pciclass,020000 |
   | pciclass,0200 |
  :assigned-addresses   
 83  00  10  10  00  00  00  00  00  20  00  00  00  00  00  00  00  20  00  00 
 83  00  10  18  00  00  00  00  00  11  00  00  00  00  00  00  00  01  00  00 
  :local-mac-address     00  03  ba  bc  0f  05 
  :devfs-path    /pci@1f,700000/network@2 
  :driver-name   bge 
  :binding-name  pci108e,1648 
  :bus-addr      2 
  :instance      0 
  :_class        network 
  :name  network 
  network (network, 2f600000184)
  :_fru_parent   (2f60000072bH) 
  :DeviceID      0x2 
  :UnitAddress   2,1 
  :vendor-id     0x14e4 
  :device-id     0x1648 
  :revision-id   0 
  :subsystem-vendor-id   0x108e 
  :subsystem-id  0x1648 
  :class-code    0x20000 
  :interrupts    00  00  00  02 
  :min-grant     0x40 
  :max-latency   0 
  :cache-line-size       0x10 
  :latency-timer         0x40 
  :devsel-speed  0x1 
  :fast-back-to-back
  :66mhz-capable
  :device_type   network 
  :address-bits  0x30 
  :max-frame-size        0x10000 
  :reg  
 00  00  11  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00 
 03  00  11  10  00  00  00  00  00  00  00  00  00  00  00  00  00  20  00  00 
 03  00  11  18  00  00  00  00  00  00  00  00  00  00  00  00  00  01  00  00 
  :compatible   (2f60000018fTBL) 

   | pci14e4,1648.108e.1648.0 |
   | pci14e4,1648.108e.1648 |
   | pci108e,1648 |
   | pci14e4,1648.0 |
   | pci14e4,1648 |
   | pciclass,020000 |
   | pciclass,0200 |
  :assigned-addresses   
 83  00  11  10  00  00  00  00  00  40  00  00  00  00  00  00  00  20  00  00 
 83  00  11  18  00  00  00  00  00  12  00  00  00  00  00  00  00  01  00  00 
  :local-mac-address     00  03  ba  bc  0f  06 
  :devfs-path    /pci@1f,700000/network@2,1 
  :driver-name   bge 
  :binding-name  pci108e,1648 
  :bus-addr      2,1 
  :instance      1 
  :_class        network 
  :name  network 
  network (network, 2f600000442)
  :_fru_parent   (2f60000072bH) 
  :DeviceID      0x2 
  :UnitAddress   2 
  :vendor-id     0x14e4 
  :device-id     0x1648 
  :revision-id   0 
  :subsystem-vendor-id   0x108e 
  :subsystem-id  0x1648 
  :class-code    0x20000 
  :interrupts    00  00  00  01 
  :min-grant     0x40 
  :max-latency   0 
  :cache-line-size       0x10 
  :latency-timer         0x40 
  :devsel-speed  0x1 
  :fast-back-to-back
  :66mhz-capable
  :device_type   network 
  :address-bits  0x30 
  :max-frame-size        0x10000 
  :reg  
 00  00  10  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00 
 03  00  10  10  00  00  00  00  00  00  00  00  00  00  00  00  00  20  00  00 
 03  00  10  18  00  00  00  00  00  00  00  00  00  00  00  00  00  01  00  00 
  :compatible   (2f60000044dTBL) 

   | pci14e4,1648.108e.1648.0 |
   | pci14e4,1648.108e.1648 |
   | pci108e,1648 |
   | pci14e4,1648.0 |
   | pci14e4,1648 |
   | pciclass,020000 |
   | pciclass,0200 |
  :assigned-addresses   
 83  00  10  10  00  00  00  00  00  20  00  00  00  00  00  00  00  20  00  00 
 83  00  10  18  00  00  00  00  00  11  00  00  00  00  00  00  00  01  00  00 
  :local-mac-address     00  03  ba  bc  0f  07 
  :devfs-path    /pci@1d,700000/network@2 
  :driver-name   bge 
  :binding-name  pci108e,1648 
  :bus-addr      2 
  :instance      2 
  :_class        network 
  :name  network 
  network (network, 2f600000467)
  :_fru_parent   (2f60000072bH) 
  :DeviceID      0x2 
  :UnitAddress   2,1 
  :vendor-id     0x14e4 
  :device-id     0x1648 
  :revision-id   0 
  :subsystem-vendor-id   0x108e 
  :subsystem-id  0x1648 
  :class-code    0x20000 
  :interrupts    00  00  00  02 
  :min-grant     0x40 
  :max-latency   0 
  :cache-line-size       0x10 
  :latency-timer         0x40 
  :devsel-speed  0x1 
  :fast-back-to-back
  :66mhz-capable
  :device_type   network 
  :address-bits  0x30 
  :max-frame-size        0x10000 
  :reg  
 00  00  11  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00 
 03  00  11  10  00  00  00  00  00  00  00  00  00  00  00  00  00  20  00  00 
 03  00  11  18  00  00  00  00  00  00  00  00  00  00  00  00  00  01  00  00 
  :compatible   (2f600000472TBL) 

   | pci14e4,1648.108e.1648.0 |
   | pci14e4,1648.108e.1648 |
   | pci108e,1648 |
   | pci14e4,1648.0 |
   | pci14e4,1648 |
   | pciclass,020000 |
   | pciclass,0200 |
  :assigned-addresses   
 83  00  11  10  00  00  00  00  00  40  00  00  00  00  00  00  00  20  00  00 
 83  00  11  18  00  00  00  00  00  12  00  00  00  00  00  00  00  01  00  00 
  :local-mac-address     00  03  ba  bc  0f  08 
  :devfs-path    /pci@1d,700000/network@2,1 
  :driver-name   bge 
  :binding-name  pci108e,1648 
  :bus-addr      2,1 
  :instance      3 
  :_class        network 
  :name  network

Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #163
Difficulty: Easy
MINIX was first released in 1987, with the complete source code available to universities for study in courses and research.
True or False?

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without... (1 Reply)
Discussion started by: westmoreland
1 Replies

2. IP Networking

network interface -

Hello, Please, how can i create a network interface with a routable IP address on linux (ubuntu) ? AND How can i desactivate an interface? Thank you so much for help. (1 Reply)
Discussion started by: chercheur857
1 Replies

3. IP Networking

Network interface-

Hello, Please what's the difference between: AND Thank you so much (3 Replies)
Discussion started by: chercheur857
3 Replies

4. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that. (0 Replies)
Discussion started by: berny88
0 Replies

5. AIX

How to detect the network cable status with c programming on AIX

Hello, Is there any API or any other approach to detect whether the network cable is connected to the network adapter, say, en0, en1 or en2? The OS is AIX6.1. Thank you. (4 Replies)
Discussion started by: zephyrbj
4 Replies

6. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks (9 Replies)
Discussion started by: skamal4u
9 Replies

7. Solaris

Network interface problem

HI, genunix: NOTICE: ce0: xcvr addr:0x01 - link up 100 Mbps half duplex genunix: WARNING: ce0: fault detected external to device; service degraded genunix: WARNING: ce0: xcvr addr:0x01 - link down genunix: NOTICE: ce0: fault cleared external to device; service available genunix: ... (4 Replies)
Discussion started by: sunnybee
4 Replies

8. Solaris

setup network interface

hi, i have sunfire 280r sparc. i would like to know how to setup interface with command ndd line and put it in the file permanently. my card is eri0 and speed can be 100mb or 1000mb full duplex. thanks in advance. (3 Replies)
Discussion started by: lamoul
3 Replies

9. UNIX for Dummies Questions & Answers

network interface questions

I can't remember or figure out how to do this. What is the command(s) in Solaris 8 sparc to show the values operating a NIC, specifically the negotiated transfer rate (10/100) and mode (full/half duplex)? Also, how can I force 100 Mb full (the network is just a crossover cable, and the other box is... (3 Replies)
Discussion started by: 98_1LE
3 Replies

10. UNIX for Dummies Questions & Answers

Network Interface

Hi ! Does anyone know how can i get information about my network interface ... if it works in half or full duplex mode !! Thx in adivance ! Witt (4 Replies)
Discussion started by: witt
4 Replies

Featured Tech Videos