Server Hangs at boot


 
Thread Tools Search this Thread
Operating Systems Solaris Server Hangs at boot
# 1  
Old 05-20-2012
Server Hangs at boot

Hi Guys,
I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot"

It doesn't boot to the kernel. Is there anyway I can possibly fix this? I will gladly appreciate your help.

Thanks Guys
# 2  
Old 05-21-2012
when you boot your server ... it taking minimum 15 mins for bringup ... plz wait ..
# 3  
Old 05-21-2012
Thanks coolboys.
However, for a practice machine that's too much. The server does not boot at all. Not even after 24hrs. I tried remote login (rlogin), seriel; no success. It stays at booting.
# 4  
Old 05-21-2012
have already fixed it by now? or still waiting for some suggestion?

If still waiting, do you see init.d started ? or see something like loading kernel modules...blahblahblah..
Do you recall something fishy done in your last logon
Can you not try the rescue method with dvd rom.. ?
# 5  
Old 05-21-2012
try to boot with:

ok> boot -m verbose
ok> boot -m debug
ok> boot -m milestone=none
ok> boot -s

And see if any of those work, and check the error messages or where it get stuck.

Do you see any error at all on the console
# 6  
Old 05-22-2012
still is not booting .. then you better replace the ram
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 10 - hangs during boot

Power server up runs through diagnostics. Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely. Any ideas? (10 Replies)
Discussion started by: psychocandy
10 Replies

2. Solaris

Server Hangs

I have a Sun-Fire-V210, the Server hangs for sometime and evn console wont be abled to access and after sometime the server comes back active. the messages file shows this , whats causing this ? # tail -500 messages Jan 25 07:02:16 xxxxxxxxxxxxx Corrupt label; wrong magic number Jan 25... (2 Replies)
Discussion started by: Sojourner
2 Replies

3. AIX

AIX 5.3 Boot Hangs On Power4 Hardware

Hi all, We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Discussion started by: a_sim
15 Replies

4. Ubuntu

Boot hangs while adding swap

Boot process hangs after reaching the following line: Adding 5853176k swap on /dev/mapper/mch-swap_1. Priority:-1 extents:1 across:5853176kUsing knoppix 6.2 as LiveCD, and mounting the partitions, I got the following: # /etc/fstab: static file system information. # # Use 'blkid -o value -s... (0 Replies)
Discussion started by: fzaker
0 Replies

5. AIX

AIX hangs through the boot process

To All: I have this AIX machine (see boot process below). The problem was it hangs at: The ctrmc Subsystem has been started. Subsystem PID is 11906.. I checked with other forums but their advise were just "strong punches in the air" with no specific explanation. I really appreciate if... (6 Replies)
Discussion started by: aix_xia
6 Replies

6. AIX

AIX hangs on boot

Hi guys, Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot. The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
Discussion started by: drchris
6 Replies

7. Shell Programming and Scripting

script hangs when a remote server is down

Hi all, I have made a script which logins to remote servers and fetches some data from it. Is is working perfectly when all servers are reachable BUT my problem is -- if in case a server is down (or not reachable), the script hangs. Is there some way, that the script just continues to ssh... (6 Replies)
Discussion started by: vikas027
6 Replies

8. Solaris

Boot hangs up on solaris

Hi all, I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console . Both the IP adresses of the server and the console are in a private network (address 10.67.xxx). For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Discussion started by: aribault
2 Replies

9. AIX

RS6K B50 Hangs at E140 on Boot

I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software. I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Discussion started by: craigp84
4 Replies

10. UNIX for Advanced & Expert Users

Solaris 9 server hangs, when rebooting

Hi, We have a SunFire V880, hooked up with 2 T3 arrays. When ever we issue a reboot command on the system, it hangs at the same place right where it says syncing file systems done. To bring it back we shutdown power and it comes clean. By the way init 6 command works fine. Has anyone come... (3 Replies)
Discussion started by: smohd
3 Replies
Login or Register to Ask a Question