Visit Our UNIX and Linux User Community


All Hardware information in Ok Boot Prompt


 
Thread Tools Search this Thread
Operating Systems Solaris All Hardware information in Ok Boot Prompt
# 1  
Old 02-17-2012
All Hardware information in Ok Boot Prompt

Can anyone tell me the command to check all the hardware information in Ok boot Prompt. Like the hard disk space memory size .....
# 2  
Old 02-17-2012
i don't know of such a command... but you'll find usefull informations with commands like banner and .properties (used in the dev tree of the OBP).
This User Gave Thanks to DukeNuke2 For This Post:
# 3  
Old 02-17-2012
You can use show-devs to display the complete device tree.
Total installed memory can be found from the banner command.
CPU and bus speeds can be found from the .speed command.
This User Gave Thanks to fpmurphy For This Post:
# 4  
Old 02-17-2012
There are a couple of things that you can do. A lot depends on your server model. Some of the older models don't have an extensive OBP.
probe-scsi-all
test-all
banner(as was suggested)

Set your diag-switch to true and boot the box.
setenv diag-switch? true
setenv diag-level max
This User Gave Thanks to garskoci For This Post:

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Hardware information

Hi Advance users, Is there any tools in centos6.5 to 6.9 can get hardware like Motherboard Serial, mac address and Processor in basic installations. This will for the encryption and generate license in application. I used dmidecode, but dmidecode is not include in the basic server... (1 Reply)
Discussion started by: lxdorney
1 Replies

2. UNIX for Advanced & Expert Users

Linux Command To Find the System Configuration And Hardware Information

Hello guys. I wanted to find the System Configuration and Hardware Information on one of my servers. Here is part of the cpu info: CPU core info: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 44 model name : Intel(R) Xeon(R) CPU... (2 Replies)
Discussion started by: Ymir
2 Replies

3. AIX

AIX 5.3 Boot Hangs On Power4 Hardware

Hi all, We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Discussion started by: a_sim
15 Replies

4. Solaris

Solaris 10u7 won't boot after hardware change

Hi all, I've somehow gained the idea that I _need_ to run at least 1 box with Solaris, but things don't go as I had planned :-) I pulled this ancient IBM eserver xseries 305 out of the dust, and got myself a fresh copy of the required cd's for Solaris 10u7. FAIL, for some reason the box and the... (7 Replies)
Discussion started by: mr.aart
7 Replies

5. Solaris

Can't boot from cdrom at ok prompt

I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6 I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Discussion started by: Msororaji
11 Replies

6. Programming

Hardware information

How would I write a program in C that prints out the hardware the current computer has? And what about information about it? Thank you for your time. (4 Replies)
Discussion started by: cubics
4 Replies

7. Solaris

no boot prompt display

just put blank harddisk in my ultra10. i see no display to show me the boot> prompt. i don't know what happened....?? Got a third party graphic card. Display was ok. Monitor seems to be ok. i used different one with same result. (1 Reply)
Discussion started by: S26+
1 Replies

8. Red Hat

linux will not boot, boot to grub prompt

my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot. The machine come up to grub prompt. I tried the following from grub prompt root (hd0, then press tab key partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Discussion started by: hassan2
7 Replies

9. UNIX for Dummies Questions & Answers

Setting a boot device alias on Sun hardware

I watched this done a long time ago, but cannot find it anywhere. I need to alias the boot device "disk" to /sbus@7,0/QLGC,isp@0,10000/sd@c,0 I think I need to set "use-nvramrc?" to true, and then create an alias within the nvramrc to point disk to the boot disk, but this is the step I cannot... (3 Replies)
Discussion started by: 98_1LE
3 Replies

10. UNIX for Dummies Questions & Answers

How do I find information about the hardware?

Hello I used to Red Hat and the common Linux commands, but now I have to deal with a SCO-Unix (Unix Ware 7). I have to find information about the hardware. What networkcard is installed? What graphiccard is installed? Which SCSI-Adapter and what kind of harddisks? What software is... (3 Replies)
Discussion started by: Fwurm
3 Replies

Featured Tech Videos