Login or Register to Ask a Question and Join Our Community


Solaris

available PCI slots on v440

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris available PCI slots on v440
# 1  
Old 01-17-2012
available PCI slots on v440
How do I find any available PCI slots on a v440?

When I run prtconf, I get the following output? But I am not able to make out whether all the PCI slots are used.



Code:
================================= IO Devices =================================
     Bus   Freq
Brd  Type  MHz   Slot        Name                          Model
---  ----  ----  ----------  ----------------------------  --------------------
 0   pci    66           MB  pci108e,abba (network)        SUNW,pci-ce
 0   pci    66         PCI2  pci1077,1016 (scsi)           QLGC,ISP10160
 0   pci    66         PCI2  pci1077,1016 (scsi)           QLGC,ISP10160
 0   pci    33           MB  isa/su (serial)
 0   pci    33           MB  isa/su (serial)
 0   pci    33           MB  isa/rmc-comm-rmc_comm (seria+
 0   pci    33           MB  pci10b9,5229 (ide)
 0   pci    66           MB  pci108e,abba (network)        SUNW,pci-ce
 0   pci    66           MB  scsi-pci1000,30 (scsi-2)      LSI,1030
 0   pci    66           MB  scsi-pci1000,30 (scsi-2)      LSI,1030

Last edited by DukeNuke2; 01-17-2012 at 04:17 PM..
# 2  
Old 01-17-2012
PCI2 is used... all the other PCI slots should be free...
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies

2. AIX

Memory - Which slots and how much?

Hi, all. I was wondering if there's a command or log file that will tell me how much RAM is in the system and, more specifically, the size of each stick. Thanks, Jason (3 Replies)
Discussion started by: JasonRkr
3 Replies

3. AIX

Command that shows mem slots

A while back I had a command that shows the memory slots (and info on the modules inserter) in an IBM AIX machine. I cannot remember it at this time, can someone help me out with this command please? (4 Replies)
Discussion started by: bbbngowc
4 Replies

4. Solaris

Memory Slots

Hi All, Can Any body tell me how to find out the how many memory slots are there in SUN server ?? Thanks and Regards, (2 Replies)
Discussion started by: lbreddy
2 Replies

5. Solaris

How to look for open pci slots

I'm looking for open PCI slots in our array of sun boxes. I need help on how to distinguish if there's an open slot or not using prtdiag and prtconf. Is there a better tool for this? TIA. Here's my prtdiag -v | grep pci: pci 66 PCI5 SUNW,qlc-pci1077,2312 (scsi-+ ... (9 Replies)
Discussion started by: revzalot
9 Replies

6. Solaris

JNI 1560 in different speed PCI slots

I've got lots of scsi transport errors on the E2900 - the HBA was replaced once out of curiosity but the problem still exists. Feb 15 07:03:11 ivsdbch2 scsi: WARNING: /ssm@0,0/pci@18 ,600000/SUNW,jfca@1,1/fp@0,0/ssd@w5005076300c889cb,4 (ssd21): Feb 15 07:03:11 ivsdbch2 SCSI transport... (1 Reply)
Discussion started by: kiem
1 Replies

7. Solaris

Moving HBA cards to different PCI slots

Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Discussion started by: kduffin
5 Replies

8. Filesystems, Disks and Memory

Probing memory slots

Hello, I'm running Red Hat Linux on a Dell Poweredge 2650 Rack Server and wondered if anyone knew of a tool or command I could use to probe the memory slots on the motherboard. I know the machine has six memory slots and currently contains 1GB RAM, what I don't know however, is if it contains... (3 Replies)
Discussion started by: cw1972
3 Replies

9. UNIX for Dummies Questions & Answers

tape driver slots confgure

Hi Does anyone know the command to configure HP tape slots. I have tried the following on Sun, but its notworking. This is the first time I have configured a tape drive with muiltple slots. root@ssdb0009 # cfgadm -l Ap_Id Type Receptacle Occupant Conditio... (3 Replies)
Discussion started by: dennisca
3 Replies
Login or Register to Ask a Question