Visit Our UNIX and Linux User Community


How to enable Serial port on ILOM, when Network Port is enabled in parallel


 
Thread Tools Search this Thread
Operating Systems Solaris How to enable Serial port on ILOM, when Network Port is enabled in parallel
# 1  
Old 08-30-2011
How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone,

In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected through a terminal server, authentication to the terminal server is successful and conformed port is opened, but cant able to view the console of the server.

So how do I need to make sure to enable the serial port on iLOM.

Thanks
# 2  
Old 08-30-2011
the serial port on the server is enabled by default. maybe your terminal server settings are wrong or you are using a wrong cable.
This User Gave Thanks to DukeNuke2 For This Post:
# 3  
Old 08-30-2011
Thanks for your reply,
What setting do I need to verify from Terminal Server side.
# 4  
Old 08-30-2011
9600,8,N,1

if you can, check with a notebook with a serial cisco cable (the baby blue ones) and a terminal software (putty, teraterm, hyperterm, tip, ...) if there is output from the serial server port. if this works you have to search on the TS side or the cables.

Previous Thread | Next Thread
Test Your Knowledge in Computers #779
Difficulty: Medium
Spectrum analysis is also referred to as time domain analysis or time density estimation.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

2. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

3. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35... (4 Replies)
Discussion started by: dmiller
4 Replies

4. HP-UX

Enable ftp port

Hi Experts, Need your help in enabling the ftp port in HP-UX box. Is there any command/config file that needs to be changed? Also is it possible to open it only for few selected IPs only? (9 Replies)
Discussion started by: sai_2507
9 Replies

5. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies

7. Fedora

Sending a byte to the parallel port

Greetings, A sort of newbie question... I would like to control a couple of stepper motors via the parallel port using C code. I have discovered in Linux, the ioperm() function is required before the outportb() function can be used to send a byte to the parallel port. My problem is ioperm()... (1 Reply)
Discussion started by: meyerga00
1 Replies

8. Red Hat

Serial Port/Com Port

System: Red Hat Enterprise Linux WS release 4 (Nahant Update 6) Any idea how to Determine if a Serial Port in Linux System is defective? Issued "cat /proc/tty/driver/serial". see below. ~# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:11... (0 Replies)
Discussion started by: etcpasswd
0 Replies

9. Solaris

Serial Port Datalogger

Hi, I'm using Solaris workstation with 5.4 OS. I was wondering if there's a way that I could log the data incoming and outgoing on a certain serial port. Thanks in Advance! (1 Reply)
Discussion started by: uryuu
1 Replies

10. Filesystems, Disks and Memory

Parallel Port info?

is there a command so that i can se info about the parallel port, if there isn't a specific command for that is there a command so i can se info about the system and all ports and devices? Thanx /Nick (2 Replies)
Discussion started by: sajjan2
2 Replies

Featured Tech Videos