SunFire T2000 ipmievd error


 
Thread Tools Search this Thread
Operating Systems Solaris SunFire T2000 ipmievd error
# 1  
Old 05-22-2011
Question SunFire T2000 ipmievd error

I'm running Solaris 10 (09/10) on Sun Fire T2000.

This error message is logged repeatedly in /var/adm/messages:

Code:
May 22 10:40:33 EBDW01 last message repeated 25 times
May 22 10:40:36 EBDW01 ipmievd: [ID 702911 daemon.notice] Reading sensors...
May 22 10:40:40 EBDW01 ipmievd: [ID 702911 daemon.error] Error obtaining SDR info: Unknown (0x7e)
May 22 10:40:40 EBDW01 ipmievd: [ID 702911 daemon.error] Unable to open SDR for reading
May 22 10:40:42 EBDW01 ipmievd: [ID 702911 daemon.error] Get SEL Info command failed: Unknown (0x7e)
May 22 10:40:42 EBDW01 ipmievd: [ID 702911 daemon.notice] Waiting for events...
May 22 10:40:44 EBDW01 ipmievd: [ID 702911 daemon.error] Get SEL Info command failed: Unknown (0x7e)


Any idea why this is happening and how to fix it ?
# 2  
Old 05-22-2011
have you tried to reset the ilom of your server? looks like ipmitool can not read the data from lom. so maybe a reset might help...
# 3  
Old 05-22-2011
Actually I have not only resetsc, but I have also upgraded the entire firmware. I'm still getting the error message repeatedly
# 4  
Old 05-25-2011
I think this happens when I upgrade the patches using the Feb/2011 EIS DVD. It replaces the IPMI tool package then this message starts to appear.

I don't know my way around this tool, but this message keeps appearing Smilie

---------- Post updated 05-25-11 at 12:19 AM ---------- Previous update was 05-24-11 at 07:35 AM ----------

I removed all the ipmi packages and the error msg is gone, not sure what's the importance of ipmi on SPARC T2000 ? any idea guys ?

Code:
root@test # pkginfo |grep -i ipmi 
system SUNWipmi ipmitool, (usr) 
system SUNWipmir ipmitool, (root) 
system ipmitool ipmitool - Utility for Intelligent 

root@test # pkgrm ipmitool SUNWipmi SUNWipmir

# 5  
Old 05-25-2011
Niagara Servers starting with the T5xxx series are equipped with ILOM - first as alternative to ALOM, then, since the T3 systems arrived, ILOM is the only management interface. Maybe Netra T2000 are equipped with ILOM too (found some references). The original T2000 only supports ALOM.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Hardware

POST error on SunFire V245

I've recently bought an SunFire V245. 2x 2.5ghz x64 4gb ram 4x 73gb sas hdd and... an blinking 'Identifior led' (white) with 'Service led' (amber) simultaneously. It boots for +- 5 secs and then the error occurd. Things done: Removed all hdd. Switched cpu Switched/removed ram... (2 Replies)
Discussion started by: niswier2222
2 Replies

2. Solaris

Sun T2000 error codes

I got a Power supply failure. I replaced the power supply and still got the error. Any ideas on what I should try next? (1 Reply)
Discussion started by: 642fiddi
1 Replies

3. Hardware

Fan Tray for Sunfire T2000

Recently the rear fan assembly of one of our T2000 servers went faulty. I could replace it immediately with the one from a currently powered off standby machine. But now this one has to be replaced. So I got a quote from our supplier who charges EUR 776 for a new spare part or EUR 405 (all... (0 Replies)
Discussion started by: hergp
0 Replies

4. Solaris

Memory problems on a -sunfire T2000

I work with a network management tool, which, for various reasons, is installed on a solaris server.This is a Sunfire T2000 server with 16 CPUs and 8GB of RAM. I have installed a Solaris 10 ZFS and 8GB swap. From the beginning I had problems with memory occupation that it rises progressively to 95%... (4 Replies)
Discussion started by: drusa79
4 Replies

5. Solaris

SunFire V890 error -256 when boot

Hi all! I've a machine - SunFire V890, it've been failed by OS error for 2 weeks ago, and now, I must reinstall OS (Solaris 10 2009), the progress was successful, but when I reboot, it displayed the error like : Error -256: Last trap memory ... access aligned Error -256: Last trap memory... (1 Reply)
Discussion started by: trantuananh24hg
1 Replies

6. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:... (2 Replies)
Discussion started by: Mwamba
2 Replies

7. Solaris

T2000 Hardware RAID

Hi, I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds. I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this? AVAILABLE DISK SELECTIONS: 0.... (12 Replies)
Discussion started by: honmin
12 Replies

8. Solaris

T2000 - Fault at MB/FF_POK

Hi all, I have a T2000 server which does not seem to respond when I power it on. Looking on the console I see the following: SC Alert: Host Power Failure: MB_DC_POK Fault SC Alert: Host system poweron failed due to fault at MB/FF_POK. SC Alert: VOLTAGE_SENSOR at MB/V_VCORE has exceeded... (4 Replies)
Discussion started by: jambalaya
4 Replies

9. Solaris

Resolution error sunfire v245

Hi all, I am getting the below error on Solaris sunfire v245 server Error: can not display this video mode optimum resolution 1024x768 60Hz i am not able to resolve this .plz help me out ? (1 Reply)
Discussion started by: saurabh84g
1 Replies

10. Solaris

Network Path Not Found Error "Sunfire V100"

I recently got this new old server from a friend. I just installed a fresh version of Solaris 10 on it. I have put a static IP of 192.168.100.10 the server. Their is no subnetting scheme on the network. And I made the hostname "SunServ." And I also changed the folder "/etc/inet/hosts" because I... (4 Replies)
Discussion started by: louisd11
4 Replies
Login or Register to Ask a Question