unable to boot afer restoring root partion manages by veritas
Hi all,
After restoring the / FS on a netra 240. It is unable to boot the system.
The message displayed is the following: "The file just loaded does not appear to be executable"
Bellow, the content of /etc/vfstab before restoring:
Code:
#more /etc/vfstab
-------------------------------------------------------------------------
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/vx/dsk/bootdg/swapvol - - swap - no nologgin
g
/dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs
1 no nologging
/dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no
nologging
/dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no
nologging
/dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes
nologging
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
#NOTE: volume rootvol () encapsulated partition c1t0d0s0
#NOTE: volume swapvol () encapsulated partition c1t0d0s1
#NOTE: volume var () encapsulated partition c1t0d0s4
#NOTE: volume usr () encapsulated partition c1t0d0s5
#NOTE: volume opt () encapsulated partition c1t0d0s7
I need to increase the /var (UFS) filesystem and root disk under veritas control or root disk is encapsulated
# df -k /var
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/var 13241195 12475897 674524 96% /var
# fstyp /dev/vx/dsk/var
ufs
# pkginfo... (1 Reply)
Hi All,
We are using Solaris 10 x86, and Veritas Storage Foundation Software version 6.0.1 and faced the following issues after mirroring and during boot from mirror.
1) VTOC has been changed after mirroring the rootdisk with this command - " /opt/VRTS/bin/vxrootmir <disk to be mirrored>".... (0 Replies)
Hi all,
I'm fairly new to Solaris and am just getting to grips with using LU (Live Upgrade) for OS patching purposes.
worcester#uname -a
SunOS worcester 5.10 Generic_144488-12 sun4v sparc SUNW,SPARC-Enterprise-T5220I have successfully created and patched a new BE (boot environment) using the... (5 Replies)
Hello I use Solaris 10. I need to restore the root file system, but I don't know how . i can only boot the server in safe mode or with the cd (ok boot cdrom -s)
Do you guys know a good procedure, I don't want to break the mirrors.
( the server is not a cluster).
Its an emergency, i would... (4 Replies)
Dear All,
In our environment we use SDS (Solaris Vlume Manager) for root file system.So, I am wondering why Veritas is not use for the same.
root@abc # df -kh
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d10 30G 22G 6.9G 77% /
/devices ... (3 Replies)
Hey Guys,
I am using a Sun sparc server and had 6 disks.
The root was loaded on c0t10d0s0 disk.
I made an image or mirrored the root to another disk c0t9d0s0.
But during the process instead of attaching submirrors to main mirror
(d0 <--- d01 and d11) i attached d0 <--- d01 and... (1 Reply)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi everyone, so i have a 40Gb disk with Windows XP and Solaris 10 Installed... windows has once again become unoperable for virus and stufff, and i need to reinstall it, but when i do that the MBR will be overwriten right? and i wont be able to access solaris10 anymore, is there a way, like a... (1 Reply)
