That depends on what definition of swap you take. When swaps means virtual memory like in the statistics posted, it does.Not necessarily. The rule is there must be enough virtual memory for all reservation to fit. The amount of memory needed is not related to the amount of RAM installed but is related to the number of applications and their requirements.
So in other words, my remaining physical memory and swap is spoken for. It may never be used, but it's spoken for.
Here is a pmap of our one of our processes:
We have about 1090 of these at peak. Is there any way to show how much a process has reserved as well as actually consumed?
Well, normally when heavy swapping starts to occur, vmstat will show high numbers in vmstat under the "sr" or scan reads column. Ours is 0 across the board.
Also, "top" shows 8GB of swap as "free". and "swap -l" shows everything but 62MB as free. I'm assuming top and swap -l are showing similar values, but it's odd that both would show that swap is almost untouched.
---------- Post updated at 09:44 PM ---------- Previous update was at 09:43 PM ----------
Here is our output from "top" at the time of one of the occurances.
Hello all
posting here after scanning the net and tried most of the things offered
still no solution that worked
when I do :
$ df -h
Filesystem Size Used Avail Use% Mounted on
footmpfs 7.9G 60K 7.9G 1% /dev
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/da1 ... (3 Replies)
Hi,
I am new to AIX, Can someone please help me how to know the swap space, total physical memory and system cache?
We are using AIX 5.3.
Thanks! (3 Replies)
Hi,
In our production box i can see the Swap space using the below command
free
total used free shared buffers cached
Mem: 65963232 41041084 24922148 0 877160 35936292
-/+ buffers/cache: 4227632 61735600
Swap: 4192880 ... (6 Replies)
I have Solaris-10 with mutiple zones running in it. My Big Brother monitoring is complaining for very less swap space available, but I am not able to find, what process has consumed its swap space and how to clear it. All zones including global server have almost blank /tmp with very less data.... (3 Replies)
Hi,
I am not sure how many scripts / java processes running on my HP-UX server.
I need to calculate the total heap of these processes.
I then need to recommend increasing the swap memory to be increase and equal to total heap if that is the right concept.
Currently we are facing... (2 Replies)
hi guys, me again ;)
i recently opened a thread about physical to zone migration.
My zone is mounted over a "bigger" LUN (500GB) and step is now to move the old files, from the physical server, to my zone.
We are talking about 22mio of files.
i used rsync to do that and every time at... (8 Replies)
HI All,
Recently during oracle install I realized that I did not have enough swap space.
So I -
1. Created a swap file "swap_fille1" in /rpool using mkfile -
# ls -ltr /rpool
total 10487121
drwxr-xr-x 3 root root 3 Dec 21 12:09 boot
drwxr-xr-x 2 root root ... (10 Replies)
Hi,
When I execute one of my shellscript I am getting the below mentioned error message .This application takes 2input files which have the records counts 26463 and 1178046
exec(2): insufficient swap or memory available.
exec(2): insufficient swap or memory available.
exec(2): insufficient swap... (3 Replies)
Hi,
When I execute one of my shellscript I am getting the below mentioned error message .This application takes 2input files which have the records counts 26463 and 1178046
exec(2): insufficient swap or memory available.
exec(2): insufficient swap or memory available.
exec(2):... (2 Replies)
Dear all
I have rp7620 sever with hp-ux 11.23 this swap space is not yet used when the physical memory usage of 98 %.
through openview it's shows memory bottleneck .
how to resolve the problem.
Rajesh (1 Reply)