HI all,
I had recently change the Server storage from EMC to the IBM SAN.
but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server.
When i go to the server, and restarted it. i use the "format" command to check, but din see any IBM SAN.
is it anyway i still need to configure in my server?
kindly advise =)
Thanks
---------- Post updated at 12:02 PM ---------- Previous update was at 11:21 AM ----------
i think the following step, solve my problem
devfsadm -Cv
Quote:
Originally Posted by
kingston
In my case, i have a IBM ESS Shark 800 storage and have multi os clients solaris 5.8 and 5.10 and RHEL 5. There is host attached with the storage and it has a graphical utility to create lun after adding new hard disks. Once the lun is created then i need to assign the lun to the host which has the WWPN ( not WWNN ) ip address, hostname. Then from solaris if i gave "devfsadm -Cv" i could see the lun.
This is what the procedure i follow in my site. It will vary with respect to the vendor. But i hope i may give a idea about assigning a lun to the client.
How configure SAN to server?