Loading Kernel module at boot

10 More Discussions You Might Find Interesting

1. Fedora

Nvidia Module Not Loading (Desktop Gone)

Well, I followed the steps in the Debian wiki here to install the drivers for the following video card: $ lspci | grep VGA 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 (rev a1)I confirmed the correct driver is installed. As you probably see I've tried this a few times and a few...

2. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

3. UNIX for Advanced & Expert Users

Problem loading cpufreq module

I'd like to install cpufreq modules on my server . I tried sudo modprobe acpi-cpufreq but got the error FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.18-238.12.1.el5xen/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device cat /proc/cpuinfo gives this ...

4. SCO

stage 1 boot failure: error loading hd (40)/boot

hi SCO Unix 5.0.6 doesn't boot due to this problem: not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot Knows someone howto solve it?

5. Shell Programming and Scripting

Perl - Error loading module.

Hi, I have a strange issue in my script. When script is run from command prompt it runs fine,but when run from cron it exist with error message. I narrowed down the issue and found that " use Mail::Sender;" is the culprit. If I comment the statment the code runs fine in both command and...

6. Linux

problem with kernel module loading

Hi masters, I am new to linux and unix forum and this is my first forum. So please excuse if I am not giving sufficient information. I will give them on request. I have created a bandwidth manager module. I am using a 2.6.9 kernel and in Red Hat 3.4.3 distribution. But when i run make...

7. Linux

How to convert Linux Kernel built-in module into a loadable module

Hi all, I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/. I need to know if I can...

8. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

9. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading...

10. Programming

Dynamically loading a module

Hi there: Thanks for clicking in first. I have a question here. I have a module that needs to be dynamically loaded when another piece of code needs it at runtime. I know that I will have to make a soname file before I can use it dynamically. My question is what commad I should use to make...

LEARN ABOUT CENTOS

modules-load.d

MODULES-LOAD.D(5)						  modules-load.d						 MODULES-LOAD.D(5)

NAME

       modules-load.d - Configure kernel modules to load at boot

SYNOPSIS

       /etc/modules-load.d/*.conf

       /run/modules-load.d/*.conf

       /usr/lib/modules-load.d/*.conf

DESCRIPTION

       systemd-modules-load.service(8) reads files from the above directories which contain kernel modules to load during boot in a static list.
       Each configuration file is named in the style of /etc/modules-load.d/program.conf. Note that it is usually a better idea to rely on the
       automatic module loading by PCI IDs, USB IDs, DMI IDs or similar triggers encoded in the kernel modules themselves instead of static
       configuration like this. In fact, most modern kernel modules are prepared for automatic loading already.

CONFIGURATION FORMAT

       The configuration files should simply contain a list of kernel module names to load, separated by newlines. Empty lines and lines whose
       first non-whitespace character is # or ; are ignored.

       Each configuration file shall be named in the style of program.conf. Files in /etc/ override files with the same name in /usr/lib/ and
       /run/. Files in /run/ override files with the same name in /usr/lib/. Packages should install their configuration files in /usr/lib/, files
       in /etc/ are reserved for the local administrator, who may use this logic to override the configuration files installed from vendor
       packages.

       If the administrator wants to disable a configuration file supplied by the vendor, the recommended way is to place a symlink to /dev/null
       in /etc/modules-load.d/ bearing the same filename.

EXAMPLE

       Example 1. /etc/modules-load.d/virtio-net.conf example:

	   # Load virtio-net.ko at boot
	   virtio-net

SEE ALSO

       systemd(1), systemd-modules-load.service(8), systemd-delta(1), modprobe(8)

systemd 208															 MODULES-LOAD.D(5)

Solaris