I cannot reach my SERVER from my NetBackup server connect through SERVER_prv ("cannot connect to client")
My SERVER was Sun OS 5.8, below is the message i get when i ping my SERVER:
I get the same error pinging other prv connection while the status from pinging other server with normal connection, i get '... is alive". What configuration files should i check? Please help.
---------- Post updated at 12:04 PM ---------- Previous update was at 11:34 AM ----------
From the other server, it seems like i was lacking an entry in
Is it i have to add something like the above? Anything i'm missing out?
Thanks.
Last edited by beginningDBA; 06-14-2010 at 12:40 AM..
It seems like not effective even i reconfigure the ip address on it. So, i have to plumb a new interface to house the private connection and it was working fine now.
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Hi,
I am using following command:
tcpdump -i eth1 icmp =8 >output.txt
i want this command to get execute for a minute only. How can we do this?
Thanks.
Please use code tags next time for your code and data. Thanks (2 Replies)
Hi
I am using perl to ping a list of nodes - with script below :
$p = Net::Ping->new("icmp");
if ($p->ping($host,1)){
print "$host is alive.\n";
}
else {
print "$host is unreacheable.\n";
}
$p->close();... (4 Replies)
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
Hi
I am trying to perform a jumpstart with values below
client sf440-003 - ip x.x.133.2
jumpstartserver zeus - ip x.x.133.19
The jumpstart tftp works as it should, I boot the machine with boot net - install etc. But when it should do a PORTMAP it fails with ICMP error.
Any ideas... (2 Replies)
Hi All,
How to disable ICMP time stamp request and time stamp reply of a machine?
How to test this feature from remote machine?
Please reply back
Vasanth (2 Replies)
All,
I have to servers (NT and REL4).
We can access the application on NT from Linux but we cannot access the applications on Linux when accessed from NT.
The applicaiton is running on Linux with some IP:Port. When we try to access that application from NT, it says that the port is... (1 Reply)
I have inherited a Sun Ultra-1, running sunOS 5.8
While on this machine, I cannot ping www.yahoo.com
I cannot ping this machine from withing our lan.
I do not have an static IP for this machine and used
Iconfig hme0 auto-dhcp start.
All is well,
It seems to me that the previous owner,... (1 Reply)
Hello! I'm in extra urgent need to have a program that sends a series of ICMP echo requests over the network to a specified host and waits until the last echo reply is received.
I know little about socket-programming (in particular I've never dealt with icmp sockets) that's why i'm desperate!! :)... (5 Replies)