Login or Register to Ask a Question and Join Our Community


Solaris

Strange problem with samba

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Strange problem with samba
# 1  
Old 03-19-2010
Strange problem with samba
Hi everyone

I have a strange problem. Here is my setup:

1. I have a Fedora FTP server (where a 3rd party is uploading files).
2. I then open an ftp session (from a Solaris 10 server) to the FTP server and "get" all the files (place files in directory X).
3. I have a samba share set up on the Solaris server (on directory X) so that Windows clients can access the files that I've transferred from the FTP server.

When I open the Samba share from the Windows clients, I cannot open the images (appears to be corrupt). However, when I obtain the files straight from the FTP server (open ftp session from Windows client to FTP server), it works.

I've tried changing the mode to ASCII when I ftp the files to the Solaris server, but still the Windows clients cannot open images on the Samba share.

Has anyone else had this problem before?

==============================================
UPDATE: I've just tried it again with the "ascii" mode and it appears to have worked.
Last edited by soliberus; 03-19-2010 at 08:37 AM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

strange problem

hello all, i am having problem in accessing a directory.I dont think its a permission issue.can anyone help me out. I am using korn sell code: $ ls -ltr sc* lrwxrwxrwx 1 essbase essbase 21 Oct 8 2010 sc_ssp -> /work/nfs/nas2/sc_ssp $ cd sc_ssp ksh: sc_ssp: not found $ (6 Replies)
Discussion started by: manid
6 Replies

2. UNIX for Dummies Questions & Answers

strange problem with samba

windowsxp:192.168.0.11 fedora14:192.168.0.12, running smb server I have disabled selinux. user list of fedora14: jone (wihch is created when install fedora14, with password 'jone') jone2 (which is added by hand, with password 'jone2') I added jone and jone2 as samba users using 'smbpasswd... (1 Reply)
Discussion started by: vistastar
1 Replies

3. Shell Programming and Scripting

Strange Problem

Hi All, I am encountering an unexpected problem while running my process, using daemon placed in /etc/init.d/. I have a process that is opening shared library using dlopen. When I run my process on the command line, it is able to open the library. But when I used daemon to run my process, I... (0 Replies)
Discussion started by: qwerty-1
0 Replies

4. Shell Programming and Scripting

Strange problem.

Well, my script started off to do what i wanted. Now, i think its not recognizing the pattern so its not moving anything. What i have to do is execute my script command for the move to take effect. So i did that and yayy it worked. Strange thing is that my DESTDIR was empty to begin with.... (2 Replies)
Discussion started by: oxoxo
2 Replies

5. Shell Programming and Scripting

Strange problem

I am using SunOS 5.9 and I don't know why all my commands are getting executed as if an extra 'enter' has been pressed. What could be the reason and how to correct it? Please help. Asty (2 Replies)
Discussion started by: Asty
2 Replies

6. UNIX for Advanced & Expert Users

Strange IP traffic behavior when using Samba and FTP (Windows/Mac to Linux)

I have set up a samba share on my Linux server. I have a gigabit switch, gigabit NICs in each machine. I have set up the /etc/samba/smb.conf to support no delay, 8192 send/receive buffers, etc. This helped the rate for Samba go from about 4MB/S to about 10MB/S, but I expect to see about... (1 Reply)
Discussion started by: perspectx
1 Replies

7. Linux

very strange problem

I have installed Fedora Core on a Toshiba Satellite Pro4600 laptop recently I have experienced a rather mysterious problem if I touch anything specially the keyboard or mouse I see this stuff “67yujhnmyyy” straight away some time it won't stop for while like this... (5 Replies)
Discussion started by: kemobyte
5 Replies

8. UNIX for Dummies Questions & Answers

strange...problem

Hi.. Some of my application were not running properly due to lack of virtual memory.....so wht i did add one free harddisk as swap file system...and increased the swap memory.. But since than my root file system is showing 100% full thr is no space left...is thr any link between these two..... (1 Reply)
Discussion started by: Prafulla
1 Replies

9. UNIX for Dummies Questions & Answers

Strange Problem

I did an installation of Redhat 7.1 and it seem to install smoothly. I go and reboot and I get the following message: "INIT: Id "x" respawing too fast: disabled for 5 minutes" The screen flashes 4 times every 10 seconds or so. I can't seem to figure why this does this. It might be a simple... (2 Replies)
Discussion started by: forjohnny
2 Replies

10. UNIX for Dummies Questions & Answers

Strange problem.Please Help !

I¡¯m a network operator, mine is an IBM PC server 320, operating system SCO unix 3.2v4.2, triton 3.1 of Baan. Recently, my server went dead every a few hours, no sign & signal shows malfunction suddenly. It looks like a sudden power failure, but the indicator of main power supply is on. Normal... (1 Reply)
Discussion started by: lyhsm
1 Replies
Login or Register to Ask a Question

LEARN ABOUT PHP

ftp_put

FTP_PUT(3)								 1								FTP_PUT(3)

ftp_put - Uploads a file to the FTP server

SYNOPSIS

       bool ftp_put (resource  $ftp_stream, string  $remote_file, string  $local_file, int  $mode, [int  $startpos])

DESCRIPTION

       ftp_put(3) stores a local file on the FTP server.

PARAMETERS

	      o $ftp_stream
		- The link identifier of the FTP connection.

	      o $remote_file
		- The remote file path.

	      o $local_file
		- The local file path.

	      o $mode
		- The transfer mode. Must be either FTP_ASCII or FTP_BINARY.

	      o $startpos
		-The position in the remote file to start uploading to.

RETURN VALUES

	Returns TRUE on success or FALSE on failure.

EXAMPLES

       Example #1

	      ftp_put(3) example

	      <?php
	      $file = 'somefile.txt';
	      $remote_file = 'readme.txt';

	      // set up basic connection
	      $conn_id = ftp_connect($ftp_server);

	      // login with username and password
	      $login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);

	      // upload a file
	      if (ftp_put($conn_id, $remote_file, $file, FTP_ASCII)) {
	       echo "successfully uploaded $file
";
	      } else {
	       echo "There was a problem while uploading $file
";
	      }

	      // close the connection
	      ftp_close($conn_id);
	      ?>

SEE ALSO

       ftp_pasv(3), ftp_fput(3), ftp_nb_fput(3), ftp_nb_put(3).

PHP Documentation Group 														FTP_PUT(3)