Error in Solaris (x86)


 
Thread Tools Search this Thread
Operating Systems Solaris Error in Solaris (x86)
# 1  
Old 02-19-2010
Error in Solaris (x86)

Hi, recently i get the error, but i no idea about this error,
please help...

Code:
Feb 19 12:49:25 gemini scsi: [ID 243001 kern.warning] WARNING: /scsi_vhci (scsi_vhci0):
Feb 19 12:49:25 gemini  /scsi_vhci/disk@g600a0b80001f6e01000044e84a70cdc6 (sd5): Command Timeout on path /pci@0,0/pci8086,3596@3/pci8086,329@0/pci1014,2fb@1,1/fp@0,0 (fp0)


and i continue find the error, is it the HBA card faulty already?

Code:
# format <dev/null
AVAILABLE DISK SELECTIONS:
       0. c0t600A0B80001F6E01000044E84A70CDC6d0 <DEFAULT cyl 32631 alt 2 hd 255 sec 126>
          /scsi_vhci/disk@g600a0b80001f6e01000044e84a70cdc6

Code:
# df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c0t600A0B80001F6E01000044E84A70CDC6d0s0
                       492G    58G   429G    12%    /u09
/dev/dsk/c0t600A0B80001F350A000033404A5D29D9d0s0
                       492G   124G   363G    26%    /u10

Code:
# mpathadm list LU
        /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
                Total Path Count: 8
                Operational Path Count: 8
mpathadm:  Error: Unable to get configuration information.
mpathadm: Unable to complete operation

Code:
# fcinfo hba-port -l
HBA Port WWN: 210000145e2421ac
        OS Device Name: /dev/cfg/c4
        Manufacturer: QLogic Corp.
        Model: IBM-FCEC
        Firmware Version: 3.03.27
        FCode/BIOS Version:  BIOS: 1.43;
        Serial Number: not available
        Driver Name: qlc
        Driver Version: 20081115-2.29
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb
        Current Speed: 2Gb
        Node WWN: 200000145e2421ac
        Link Error Statistics:
                Link Failure Count: 0
                Loss of Sync Count: 1
                Loss of Signal Count: 1
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
HBA Port WWN: 210000145e2421ad
        OS Device Name: /dev/cfg/c5
        Manufacturer: QLogic Corp.
        Model: IBM-FCEC
        Firmware Version: 3.03.27
        FCode/BIOS Version:  BIOS: 1.43;
        Serial Number: not available
        Driver Name: qlc
        Driver Version: 20081115-2.29
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb
        Current Speed: 2Gb
        Node WWN: 200000145e2421ad
Error: SendRLS failed for 210000145e2421ad


Last edited by SmartAntz; 02-19-2010 at 02:26 AM..
# 2  
Old 02-19-2010
Is that a direct connection or going through brocades?
# 3  
Old 02-19-2010
the server is the IBM blade, it connect to the IBM SAN storage
this server is going thru to the SAN switch and then the storage box
# 4  
Old 02-19-2010
If you are connected to brocades device then this link might be usefull.

#200215: Brocade 3900 and 12000 Switches May Lose SAN Storage Path Following Link Event or Config Change
# 5  
Old 02-19-2010
additional info
Code:
# fcinfo remote-port -slp 210000145e2421ac
Remote Port WWN: 200800a0b81f6e02
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 3
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044BF4439934Ed0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200800a0b81f6e03
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 1
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044BF4439934Ed0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200900a0b81f6e02
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 1
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200900a0b81f6e03
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 2
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
# fcinfo remote-port -slp 210000145e2421ad
Remote Port WWN: 200800a0b81f6e02
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 3
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200800a0b81f6e03
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 1
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200900a0b81f6e02
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 1
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2
Remote Port WWN: 200900a0b81f6e03
        Active FC4 Types: SCSI
        SCSI Target: yes
        Node WWN: 200800a0b81f6e01
        Link Error Statistics:
                Link Failure Count: 2
                Loss of Sync Count: 2
                Loss of Signal Count: 2
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 0
                Invalid CRC Count: 0
        LUN: 0
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F6E01000044E84A70CDC6d0s2
        LUN: 1
          Vendor: IBM
          Product: 1722-600
          OS Device Name: /dev/rdsk/c0t600A0B80001F350A000033404A5D29D9d0s2

# 6  
Old 02-19-2010
Check that your storage is on the required baseline. Get a quick downtime to power-cycle the switches and observe.
# 7  
Old 03-25-2010
stmsboot -u

just run following.
# stmsboot -u
it's required reboot.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris: clnt_create fails on solaris x86

Hi, I am facing an issue with Solaris x86 machine Machine Details: uname -a SunOS sol10-64 5.10 Generic_137138-09 i86pc i386 i86pc .............................. Description: I am trying to register a programm with proramm ID 300760 with version number 1, and tryint to create a... (0 Replies)
Discussion started by: DivakarAdari
0 Replies

2. Emergency UNIX and Linux Support

Unbootable solaris 10 x86

Hi all, I have unbootable Solaris 10 x86 installed on ZFS root file system. on an IDE HDD The bios keep showing the msg DISK BOOT FAILURE , PLEASE INSERT SYSTEM BOOT DISK please note : the HDD is connected properly and recognized by the system is there any guide to recover the system ,... (67 Replies)
Discussion started by: h@foorsa.biz
67 Replies

3. Solaris

Apache Install error on Solaris 10 x86

I am trying to install apache on a sun server (Solaris 10 x86) but when I execute the compile i have the following error; configure failed for srclib/apr Can anybody help with this. Thanks for the usual help oh-daa (2 Replies)
Discussion started by: oh-daa
2 Replies

4. Solaris

Jumpstart Solaris 10 x86

I need a little help figuring out why my custom jumpstart network installation is dumping me to a manual install. I am trying to install Solaris 10 (unattended) over the wire from my jumpstart server to an HP Proliant DL380 server but I'm having difficulties with the unattended part. So, what... (2 Replies)
Discussion started by: alias.256
2 Replies

5. UNIX for Dummies Questions & Answers

Running Solaris Sparc Apps on X86 Solaris

I know that Sun make s a version of Solaris for Sparc platforms and also an x86 (Intel/AMD) release of Solaris. Can an application that runs on Solaris/Sparc also run on a PC running the x86 release of Solaris? Would a different release be required or any re-compling of the application? jim (1 Reply)
Discussion started by: stocksj
1 Replies

6. Solaris

Solaris x86 on D<LL (OK I said it)

OK, I have a DELL Poweredge 2850 fresh out of the box sitting here. I'm thinking of putting Solaris 9 x86 on it. Has anyone ever attempted this before, do you think it will work? I dont want to get into something that is just going to be a enormus waste of time, so I am wondering if anyone... (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies

7. Solaris

Solaris 10 X86

Ok here goes, this MCSE is now fed up with MS, they are telling me that my Legal XP has a s/num they didnt issue. After countless emails I am P with them and am loooking for a new OS. Tried Linux, got it working but seems too flaky for me. Have installed Solaris 10 X86 (on a temp pc AMD Athlon... (1 Reply)
Discussion started by: mickie
1 Replies

8. Solaris

Solaris x86 Book?

Does anyone know of a good book to read that teaches you all about Solaris for the x86 platform? Or maybe something related? A good website? Anyone? (3 Replies)
Discussion started by: Mr. Nice Guy
3 Replies

9. Solaris

solaris on x86

hi, need help! i've installed solaris 9 on my x86 box...problems with kdmconfig. here what i have: 1- Dell 17" Flat monitor ( 31kHz-80kHz horizontal and 56 Hz-76Hz Vertical) 2- Matrox Millenium G550 card what choices do i have to made? best regards thank you in advance (1 Reply)
Discussion started by: hmaiida
1 Replies

10. UNIX for Dummies Questions & Answers

Solaris 8 x86

Hi There, I search a lot across the board but didn't find answer... first of all... I installed the Companion CD. So Kde is supposed to work... I ran the script to have it in my login screen, and it's there... but when I enter it, it only kicks me to the login screen once... (1 Reply)
Discussion started by: Erythro73
1 Replies
Login or Register to Ask a Question