Quote:
Originally Posted by
incredible
at the ok> prompt type devalias. check for the device path for disk or disk0.
then issue ok> boot disk or <path>. before doing so, change the boot-device param at the OBP
ok
ok show-disks
a) /pci@1f,0/pci@5/scsi@2,1/disk
b) /pci@1f,0/pci@5/scsi@2/disk
c) /pci@1f,0/ide@d/cdrom
d) /pci@1f,0/ide@d/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@1f,0/pci@5/scsi@2,1/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@1f,0/pci@5/scsi@2,1/disk
ok nvalias newscsidisk(a) /pci@1f,0/pci@5/scsi@2,1/disk@0,0
ok boot newscsidisk(a)
Resetting ...
Sun Blade 150 (UltraSPARC-IIe 650MHz), No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.1, 512 MB memory installed, Serial #xxxxxxxx.
Ethernet address xxxxxxxx, Host ID: xxxxxxxx.
Rebooting with command: boot newscsidisk(a)
Boot device: /pci@1f,0/pci@5/scsi@2,1/disk@0,0 File and args:
Evaluating:
Can't open boot device
ok show-disks
a) /pci@1f,0/pci@5/scsi@2,1/disk
b) /pci@1f,0/pci@5/scsi@2/disk
c) /pci@1f,0/ide@d/cdrom
d) /pci@1f,0/ide@d/disk
q) NO SELECTION
Enter Selection, q to quit: b
/pci@1f,0/pci@5/scsi@2/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@1f,0/pci@5/scsi@2/disk
ok nvalias newscsidisk(b) /pci@1f,0/pci@5/scsi@2/disk@0,0
ok boot newscsidisk(b)
Boot device: /pci@1f,0/pci@5/scsi@2/disk@0,0 File and args:
boot: cannot open kernel/unix
Enter filename [kernel/unix]:
boot: cannot open kernel/unix
Enter filename [kernel/unix]: /platform/sun4u/kernel/
boot: cannot open /platform/sun4u/kernel/
Enter filename [kernel/unix]:
Enter default directory for modules [/platform/sun4u/kernel /kernel /usr/kernel]:
krtld: error during initial load/link phase
ERROR: Last Trap: Fast Data Access MMU Miss
Evaluating:
Error -256
ERROR: Last Trap: Fast Data Access MMU Miss
Evaluating:
Error -256
ok