Solaris 10 svcs failures


 
Thread Tools Search this Thread
Operating Systems Solaris Solaris 10 svcs failures
# 8  
Old 11-18-2009
Quote:
Originally Posted by jlliagre
Migrating to ZFS would make the problem disappear so would be kind of a fix.
I doubt it can't be something else than an SVM configuration related or mirror corruption issue.
Really no problem with the SVM mirror. I already checked the filesystem, newfs, ufsdump, recreated mirror.. etc etc.. so no more chance for that.
# 9  
Old 11-18-2009
Is your mirror bootable ? Is it SPARC or x86 ?
# 10  
Old 11-18-2009
Its a SPARC M3000. Yes, the mirror does boot up to run level 3 and the login appears. Metadevice state is Okay.

---------- Post updated at 11:24 PM ---------- Previous update was at 10:43 PM ----------

The following is the exact problem I faced. But to let you know, the log file does not show useful info nor I don't see any symptoms of disk failure, (even though I tried with the 2 other spare disks)
PHP Code:
bash-3.00# iostat -En |grep Hard
c0t1d0           Soft Errors0 Hard Errors0 Transport Errors0
c0t0d0           Soft Errors
0 Hard Errors0 Transport Errors0
c0t2d0           Soft Errors
0 Hard Errors0 Transport Errors0
c0t3d0           Soft Errors
0 Hard Errors0 Transport Errors0
c0t4d0           Soft Errors
8 Hard Errors0 Transport Errors0
c3t6001438005DE95970000600001EB0000d0 Soft Errors
1 Hard Errors0 Transport Errors

Code:
Solaris[TM] 10 Operating System: Local filesystem issue may cause no network services on reboot
 

--------------------------------------------------------------------------------

Symptoms


Systems running Solaris[TM] 10 Operating System (S10) with local filesystem issues during a boot/reboot may cause network services, such as inetd or sshd, to not start.


A bootup/reboot, may see this type of message:

SunOS Release 5.10 Version Generic_118822-25 64-bit
Copyright 1983-2005 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hostname: netlab36
SUNW,eri0 : 100 Mbps full duplex link up
checking ufs filesystems
/dev/rdsk/c1t1d0s0: is logging.
svc:/system/filesystem/local:default: WARNING: /sbin/mountall -l failed: exit status 1
May 26 21:02:42 svc.startd[7]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" failed with exit status 95.
[ system/filesystem/local:default failed fatally (see 'svcs -x' for details) ]Will need to be connected to system via console or serial port since network services are disabled (headless systems) to see any boot errors.



Resolution


At least four items may be observed during this issue:


1. 'svcs -x' sees issue with: svc:/system/filesystem/local:default (local file system mounts)

2. 'inetd' not running

3. 'sshd' not running

4. multiuser milestone is not completed

If #1 is true, then look at /var/svc/log/system-filesystem-local:default.log and determine why one of the local filesystems cannot be mounted. Some possibilities:

require fsck 
cannot get to filesystem (ie. no longer available) 
bad disk 
cannot get to disk due to bad HBA

# 11  
Old 11-21-2009
Any help pls Smilie
# 12  
Old 11-21-2009
what tells

Code:
who -r

and

Code:
svcs -a | grep network

and is this SPARC or x86 Solaris
# 13  
Old 11-22-2009
its a sparc. network is uninitialised. runlevel is 3
# 14  
Old 11-22-2009
can you get GUI or stock in CLI , what says

Code:
car /etc/system

and did you tried to do a reconfiguration boot from OBP

Code:
boot -r

and if you have GUI and everything is OK , but just network is disabled try

Code:
netservices open

in UNIX CLI
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Pkgadd failures with Solaris 11

I have some simple package installations that have worked in previous versions of Solaris just fine. I can install the packages, then install newer versions right over the top without error. In previous versions I had to specify the -G option during the installation in order for this to work. ... (0 Replies)
Discussion started by: moondog25
0 Replies

2. Solaris

Svcs: failed to iterate over instances: server has insufficient resources

Hi community, one of my zone is having issue and while i issue svs -a, i am getting below error "svcs: failed to iterate over instances: server has insufficient resources" none on the services are working including ssh/telnet. please help me to fix this issue thanks & Regards,... (1 Reply)
Discussion started by: bentech4u
1 Replies

3. Shell Programming and Scripting

Check & use output of svcs command

Hello Dear Friends, I need to check output of svcs command and so the status of some instances. -bash-3.00$ svcs -a | grep rfe online Aug_04 svc:/application/rfe/rfe_master_3:default online Aug_04 svc:/application/rfe/rfe_master_4:default as you can see there are two... (1 Reply)
Discussion started by: EAGL€
1 Replies

4. Solaris

Solaris 10 svcs failures

I have a solaris 10 machine that was working fine until the system crashed after a power failure. Now, after the system boots up, several services go into maintenance mode. offline 8:54:59 svc:/milestone/multi-user-server:default offline 8:54:59... (15 Replies)
Discussion started by: krishani3831
15 Replies

5. Solaris

PostgreSQL - Adding to SVCS list.

I'm having some troubles setting an instance of postgreSQL to automatically start upon system boot. I have two servers running this app, one is automatically starting the service, the other is not. I'm attempting to use the "svcadmin" command, however, apparently when I run a "svcs -a" search, the... (6 Replies)
Discussion started by: Nvizn
6 Replies

6. Solaris

svcs command shows the state as disabled

Hi I need to export a directory named /sybase from my solaris machine via NFS. The svcs command shows the state as disabled. Please let me know how to export the directory. Once the directory is exported from the solaris machine it has to be mounted locally in an aix machine. Can some one... (2 Replies)
Discussion started by: newtoaixos
2 Replies

7. Solaris

svcs showing online* status

Hi Experts I am getting following status # svcs wbem STATE STIME FMRI online* 18:19:29 svc:/application/management/wbem:default /var/svc/log/application-management-wbem:default.log is being flooded with following message (5 Replies)
Discussion started by: mtomar
5 Replies

8. UNIX for Advanced & Expert Users

Need svcs equivalent command

Hi, I am new to HP-UX. Can someboby help me with the svcs equivalent command in HP-UX ??? svcs is command that we use in Solaris for service status. I need to get the status of services in HP-UX. Thanks in advance. (2 Replies)
Discussion started by: EmbedUX
2 Replies

9. Solaris

Boot problem with SMF svcs-Solaris 10 for x86

Hi All, I am newbie in solaris, please guide me. A week before i installed solaris10 on my x86 system, it was working fine i always used "init 5" to shutdown my system as per my collegue advice. But yesterday when i started my system it gave me following message ... (6 Replies)
Discussion started by: imrankhan.in
6 Replies

10. Solaris

svcs command on solaris 8 and 9

Hi, Can anybody tell me what is the command to start and stop services on solaris 8. I found command svcs on solaris 10 but not on 8 or 9. Please guilde me. Thanks, Rucha (7 Replies)
Discussion started by: rucha_mahajan
7 Replies
Login or Register to Ask a Question