Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute!
I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks.
Now everything is working fine and we've had no downtime or anything but I am due to perform an upgrade of our software and I ran metastat just to check out the mirroring, below is what i got.
I've tried using metareplace -e dy cxtxdxsx on the submirrors that in are Maintenance state and they are resyncing right now...prob gonna take some time!
My question is with regards to the "last erred" submirrors...are these gonners? I've checked /var/adm/messages and can see no read/write errors and iostat -En shows no hard errors, only 1 soft error each on the internal disks.
I ran fsck on the internal disks and
So should I be looking at replacing the disks or if the ones i have put resyncing right now come back ok can I do a metareplace on the "Last erred" submirrors?
I have an alternative boot point also that I can boot to, the mirror on the second internal disk...so if i boot to that and try to sync will it use the second submirror as the "master" when syncing?
Before you go and do anything drastic:
Is this Solaris 10 and have you rebooted the box lately?
If it is Solaris 10 and you rebooted the box lately, make sure the mdmonitor service came back online. If mdmonitor is not running, metastat will report mirrors as needing maintenance when in reality they are ok.
I have a similar problem with a solaris 8 server using 5200 disk array. Every reboot I will get a number of MD devices that will need maintance / last errored. Due to the how the metadevices are set up, i.e. one of my devices has 7 sub-devices, its quite worrying.
I tend to just metareplace -e the failed device with the one that last error'ed e.g.
Its when you have two sub devices that have error'ed / need maintenance ( failed during a re-sync) that you need to be careful.
You may find its not the disks that are iffy, but the enclosure.
SBK
Well after I ran metareplace with the submirrors that were in maintenance they came up okay again, and the ones that had been "last erred" changed to maintenance, so i ran metareplace -e again on these and they have resynced fine this time.
Hi 2 all,
i have had AIX 7.2
:/# /usr/IBMAHS/bin/apachectl -v
Server version: Apache/2.4.12 (Unix)
Server built: May 25 2015 04:58:27
:/#:/# /usr/IBMAHS/bin/apachectl -M
Loaded Modules:
core_module (static)
so_module (static)
http_module (static)
mpm_worker_module (static)
... (3 Replies)
Hello.
System : opensuse leap 42.3
I have a bash script that build a text file.
I would like the last command doing :
print_cmd -o page-left=43 -o page-right=22 -o page-top=28 -o page-bottom=43 -o font=LatinModernMono12:regular:9 some_file.txt
where :
print_cmd ::= some printing... (1 Reply)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
OS-X 10.8.4
Using locate I get these results:
10:~ mize$ locate /Users/mize/*.sh
/Users/mize/Zend/workspaces/DefaultWorkspace/SLM/vendor/ZF2/bin/check-cs.sh
/Users/mize/copy_ascii_upload.sh
/Users/mize/copy_ascii_upload_to_server.sh
/Users/mize/copy_form_functions_php_to_jpl.sh... (7 Replies)
The system don't boot.
on the screen appears following:
press enter to maintenance (or type CTRL-D to continue)...I checked with format command.
... the slices "0-root","1-swap","2-backup" exist.
...the slises "3-var","6-usr" -unassigned. :( (16 Replies)
logs:
"/home/abc/public_html/index.php"
"/home/abc/public_html/index.php"
"/home/xyz/public_html/index.php"
"/home/xyz/public_html/index.php"
"/home/xyz/public_html/index.php"
how to use "cut" or "awk" or "sed" to get the following result:
abc
abc
xyz
xyz
xyz (8 Replies)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
Hi Friends,
Can any of you explain me about the below line of code?
mn_code=`env|grep "..mn"|awk -F"=" '{print $2}'`
Im not able to understand, what exactly it is doing :confused:
Any help would be useful for me.
Lokesha (4 Replies)