error messages in Sun Fire V440


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems Solaris error messages in Sun Fire V440
# 1  
error messages in Sun Fire V440

Hello,

I am seeing error messages in V440 (OS = solaris 8). I have copied here :

The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day..

I searched on google and found that many people had similar issues with their v440s but I did not see a solution provided for this issue.



Unfortunately the system is out of sun warranty/support, so forums is the way to start..

If there is any other information required please let me know.

Thanks Smilie
# 2  
looks like memory errors... but the AFSR and AFAR output needs to be decrypted to be sure where the problem comes from...
# 3  
Quote:
Originally Posted by DukeNuke2
looks like memory errors... but the AFSR and AFAR output needs to be decrypted to be sure where the problem comes from...
Thanks again DukeNuke2, any ideas on how to decrypt...

and yes they look like memory errors, if I know what DIMM then I can at least take that out..
# 4  
sun has tools to decrypt it...
# 5  
it's memory errors...
look to me like it maybe in CPU cache.

cediag is the SUN tool that can decode the messages.
# 6  
MySQL

Smilie
Quote:
Originally Posted by robsonde
it's memory errors...
look to me like it maybe in CPU cache.

cediag is the SUN tool that can decode the messages.
Thank you Robsonde, really appreciate your response. cediag, I could download from sun.com and install, let's see how it helps

Thanks again!

got cediag o/p

Quote:
cediag: Revision: 1.94 @ 2007/07/26 22:55:08 UTC
cediag: Analysed System: SunOS 5.8 with KUP 117350-62 (MPR active)
cediag: findings: 0 datapath fault message(s) found
cediag: findings: 720 UE(s) found - potential rule#3 match
cediag: advice:HIGH: refer UE(s) to Sun Support [A]s [S]oon [A]s [P]ossible
cediag: findings: 1 DIMMs with a failure pattern matching rule#4a
cediag: findings: DIMM 'C0/P0 Bank#0' matched rule#4a failure pattern
cediag: advice:HIGH: replace DIMM 'C0/P0 Bank#0' [A]s [S]oon [A]s [P]ossible
cediag: findings: 0 DIMMs with a failure pattern matching rule#4b
cediag: findings: 0 DIMMs with a failure pattern matching rule#5
cediag: findings: 0 DIMMs with a failure pattern matching rule#5 supplemental
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #442
Difficulty: Easy
84% of the women surveyed by Cosmopolitan Magazine in 2018 indicated they would prefer to date a computer programmer than a rock star.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies

2. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies

3. Solaris

Sun-Fire V440 boot disk issue

Hi, I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken. Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies

4. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

5. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

6. Solaris

ALOM wont work when KVM connected to Sun Fire V440 server

Hi, I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection. ... (0 Replies)
Discussion started by: jimmy54321
0 Replies

7. Solaris

Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console : SC Alert: Correct SCC not replaced - shutting managed system down! This is cured by moving out battery from ALOM card. Now server start to loop during the testing. That's on the console: >@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies

8. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:... (2 Replies)
Discussion started by: Mwamba
2 Replies

9. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies

10. Solaris

Sun Fire V440 and Patch 109147-39

Got an curious issue. I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on. The patch modified mainly the linker libraries and commands. ... (2 Replies)
Discussion started by: BOFH
2 Replies

Featured Tech Videos