I am new to the unix world. I have SunBlade 100 and A1000 Disk storage array with 12 Hard drives. I used SCSI card and SCSI cables to connect. When I do the format command,I can see disk storage as one disk instead of 12 disks as below. Could anybody can explain why?
What should I do in order to see 12 disks?
Thanks in advance.
Code:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 19781 alt 2 hd 16 sec 63>
/pci@1f,0/ide@d/dad@0,0
1. c0t2d0 <DEFAULT cyl 38307 alt 2 hd 16 sec 255>
/pci@1f,0/ide@d/dad@2,0
2. c1t5d0 <Symbios-StorEDGEA1000-0205 cyl 25789 alt 2 hd 64 sec 64>
/pci@1f,0/pci@5/scsi@1/sd@5,0
Last edited by DukeNuke2; 06-29-2009 at 10:08 AM..
Reason: added code tags
the a1000 is a hardware raid. you can't the the disks, only luns mapped from the box. if you need more luns, you'll need to download "raid manager 6.xx" software from suns webpage. the software is needed to configure the a1000 array.
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Hi
We have an array connected to the machine but when i issue format command i dont see it. But the array is up and running and there are no warning lights.
Is there a way to find that array from the OK boot prompt?
Please advise.
Thanks (9 Replies)
Hi,
Anyone can help me, just want to confirm, if possible adding a disk storage that we have a RAWDATA with +ASM in our database. If possible, what would you recommend "workaround used" from us to do and the preparation. And also how long the downtime will take.
Our disk continuous to grow,... (0 Replies)
I would want to ask on what software do i need to configure disk array for StorEdge A1000. (Sun Enterprise 450 - currently installed with SUN Solaris 9.)
Is it using RAID Manager 6.22? And is it compatible with SUN Solaris 9 or 10?
Thanks in advance for reading or replying my post. (2 Replies)
