Solaris

Hi

I am trying to perform a jumpstart with values below

client sf440-003 - ip x.x.133.2
jumpstartserver zeus - ip x.x.133.19

The jumpstart tftp works as it should, I boot the machine with boot net - install etc. But when it should do a PORTMAP it fails with ICMP error.

Any ideas on what is causing this?

BR
Jorgen

This is the printout from the client

Requesting Internet address for xxxxxxxxxxxxx
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
SC unretrieved msg JUN 10 15:54:07 2009 UTC [Host System has Reset]
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface ce1...
Skipped interface ce1
Attempting to configure interface ce0...
Configured interface ce0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...

----- here it starts normal solaris installation -----

The snoop gives the following:

sf440-003 -> 132.196.255.255 BPARAM C GETFILE root

zeus -> sf440-003 BPARAM R GETFILE File=/export/jumpstart/OSSRC_10_1/solaris10_image/Solaris_10/Tools/Boot

sf440-003 -> zeus ICMP Destination unreachable (UDP port 32769 unreachable)

sf440-003 -> 132.196.255.255 BPARAM C GETFILE install

zeus -> sf440-003 BPARAM R GETFILE File=/export/jumpstart/OSSRC_10_1/solaris10_image

sf440-003 -> 132.196.133.255 BPARAM C GETFILE sysid_config

sf440-003 -> 132.196.133.255 BPARAM C GETFILE sysid_config (retransmit)

sf440-003 -> 224.0.0.2 ICMP Router solicitation
....

have you checked the ethernet connection? is there a firewall inside your switch that blocks ports?
try to boot the 440 fron dvd and give it the ip and after that try to ping your network (for troubleshoting).

Hi

Thanks for your comments.
I recently had another sun SW installed on it and have booted on the old SW and a ping is possible.
I am not sure about firewall issues but this has worked before but than I used another jumpstart server(on the same subnet though)

BR
Jörgen