Sun Fire v440 hardware problem (can't get ok>)


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems Solaris Sun Fire v440 hardware problem (can't get ok>)
# 1  
Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:

Code:
>@(#) Sun Fire[TM] V440,Netra[TM] 440 POST 4.17.2 2005/07/21 12:50 
 
       /export/delivery/delivery/4.17/4.17.2/post4.17.0/Fiesta/chalupa/integrate 
d  (root) 
 
0>Copyright ╘ 2005 Sun Microsystems, Inc. All rights reserved 
 
  SUN PROPRIETARY/CONFIDENTIAL. 
 
  Use is subject to license terms. 
 
0>Hard Powerup RST thru SW 
 
0>OBP->POST Call with %o0=00001000.01ff2000. 
 
0>Diag level set to MIN. 
 
0>Verbosity level set to MAX. 
 
0>I/O port set to TTYA. 
 
0>Start Selftest..... 
 
0>CPUs present in system: 0 1 2 3 
 
SC Alert: Host system has shut down. 
 
 
 
0>Test CPU(s)..... 
 
0>Init SB 
 
0>Initialize I2C Controller 
 
0>Init CPU 
 
0>DMMU 
 
0>DMMU TLB DATA RAM Access 
 
0>DMMU TLB TAGS Access 
 
0>IMMU Registers Access 
 
0>IMMU TLB DATA RAM Access 
 
0>IMMU TLB TAGS Access 
 
0>Init mmu regs 
 
0>Setup L2 Cache 
 
0>L2 Cache Control = 00000000.00f04400 
 
0>      Size = 00000000.00100000... 
 
0>Scrub and Setup L2 Cache 
 
0>Setup and Enable DMMU 
 
0>Setup DMMU Miss Handler 
 
0>Test  Mailbox 
 
0>Scrub Mailbox 
 
0>CPU Tick and Tick Compare Registers Test 
 
0>CPU Stick and Stick Compare Registers Test 
 
0>Set Timing 
 
0>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>Init CPU 
 
2>Init CPU 
 
3>Init CPU 
 
1>      UltraSPARC[TM] IIIi, Version 2.4 
 
2>      UltraSPARC[TM] IIIi, Version 2.4 
 
3>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>DMMU 
 
2>DMMU 
 
3>DMMU 
 
1>DMMU TLB DATA RAM Access 
 
2>DMMU TLB DATA RAM Access 
 
3>DMMU TLB DATA RAM Access 
 
1>DMMU TLB TAGS Access 
 
2>DMMU TLB TAGS Access 
 
3>DMMU TLB TAGS Access 
 
1>IMMU Registers Access 
 
2>IMMU Registers Access 
 
3>IMMU Registers Access 
 
1>IMMU TLB DATA RAM Access 
 
2>IMMU TLB DATA RAM Access 
 
3>IMMU TLB DATA RAM Access 
 
1>IMMU TLB TAGS Access 
 
2>IMMU TLB TAGS Access 
 
3>IMMU TLB TAGS Access 
 
1>Init mmu regs 
 
2>Init mmu regs 
 
3>Init mmu regs 
 
1>Setup L2 Cache 
 
1>L2 Cache Control = 00000000.00f04400 
 
1>      Size = 00000000.00100000... 
 
2>Setup L2 Cache 
 
2>L2 Cache Control = 00000000.00f04400 
 
2>      Size = 00000000.00100000... 
 
3>Setup L2 Cache 
 
3>L2 Cache Control = 00000000.00f04400 
 
3>      Size = 00000000.00100000... 
 
1>Scrub and Setup L2 Cache 
 
2>Scrub and Setup L2 Cache 
 
3>Scrub and Setup L2 Cache 
 
1>Setup and Enable DMMU 
 
2>Setup and Enable DMMU 
 
3>Setup and Enable DMMU 
 
1>Setup DMMU Miss Handler 
 
2>Setup DMMU Miss Handler 
 
3>Setup DMMU Miss Handler 
 
1>Test  Mailbox 
 
2>Test  Mailbox 
 
3>Test  Mailbox 
 
 
 
 ******  POST Running ****** 
 
 
 
 
 
 ******  POST Running ****** 
 
 
 
1>Scrub Mailbox 
 
2>Scrub Mailbox 
 
3>Scrub Mailbox 
 
 
 
 ******  POST Running ****** 
 
 
 
1>CPU Tick and Tick Compare Registers Test 
 
2>CPU Tick and Tick Compare Registers Test 
 
3>CPU Tick and Tick Compare Registers Test 
 
1>CPU Stick and Stick Compare Registers Test 
 
2>CPU Stick and Stick Compare Registers Test 
 
3>CPU Stick and Stick Compare Registers Test 
 
1>Setup Int Handlers 
 
2>Setup Int Handlers 
 
3>Setup Int Handlers 
 
0>Interrupt Crosscall..... 
 
0>Setup Int Handlers 
 
0>Send Int CPU 1 
 
0>Send Int CPU 2 
 
0>Send Int CPU 3 
 
1>Send Int to Master CPU 
 
2>Send Int to Master CPU 
 
3>Send Int to Master CPU 
 
0>MB:   Part-Dash-Rev#:  5016344-07-50  Serial#:  003117 
 
0>CPU0: Part-Dash-Rev#:  5016369-03-51  Serial#:  017409 
 
0>CPU1: Part-Dash-Rev#:  5016369-03-51  Serial#:  017418 
 
0>CPU2: Part-Dash-Rev#:  5016369-03-51  Serial#:  017450 
 
0>CPU3: Part-Dash-Rev#:  5016369-03-51  Serial#:  012504 
 
 
 
 ******  POST Running ****** 
 
 
 
0>Set CPU/System Speed 
 
0>........ 
 
 
 
 ******  POST Running ****** 
 
 
 
0>Send MC Timing CPU 1 
 
 
 
 ******  POST Running ****** 
 
 
 
0>Send MC Timing CPU 2 
 
0>Send MC Timing CPU 3 
 
0>Init Memory..... 
 
0>Probe Dimms 
 
1>Probe Dimms 
 
2>Probe Dimms 
 
3>Probe Dimms 
 
1>Init Mem Controller Regs 
 
2>Init Mem Controller Regs 
 
3>Init Mem Controller Regs 
 
0>Init Mem Controller Regs 
 
1>Set JBUS config reg 
 
2>Set JBUS config reg 
 
3>Set JBUS config reg 
 
0>Set JBUS config reg 
 
0>IO-Bridge unit 0 init test 
 
0>IO-Bridge unit 1 init test 
 
0>Do PLL reset 
 
0>Setting timing to 6:1 9:1, system frequency 177 MHz, CPU frequency 1062 MHz 
 
 
 
SC Alert: Host System has Reset 
 
0>Soft Power-on RST thru SW 
 
0>PLL Reset..... 
 
0>Init SB 
 
0>Initialize I2C Controller 
 
0>Init CPU 
 
0>Init mmu regs 
 
0>Setup L2 Cache 
 
0>L2 Cache Control = 00000000.00f04400 
 
0>      Size = 00000000.00100000... 
 
0>Setup and Enable DMMU 
 
0>Setup DMMU Miss Handler 
 
0>Scrub Mailbox 
 
0>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
0>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>Init CPU 
 
1>      UltraSPARC[TM] IIIi, Version 2.4 
 
2>Init CPU 
 
3>Init CPU 
 
2>      UltraSPARC[TM] IIIi, Version 2.4 
 
3>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>Init mmu regs 
 
2>Init mmu regs 
 
3>Init mmu regs 
 
1>Setup L2 Cache 
 
1>L2 Cache Control = 00000000.00f04400 
 
1>      Size = 00000000.00100000... 
 
2>Setup L2 Cache 
 
2>L2 Cache Control = 00000000.00f04400 
 
2>      Size = 00000000.00100000... 
 
3>Setup L2 Cache 
 
3>L2 Cache Control = 00000000.00f04400 
 
3>      Size = 00000000.00100000... 
 
1>Setup and Enable DMMU 
 
2>Setup and Enable DMMU 
 
3>Setup and Enable DMMU 
 
1>Setup DMMU Miss Handler 
 
2>Setup DMMU Miss Handler 
 
3>Setup DMMU Miss Handler 
 
1>Scrub Mailbox 
 
2>Scrub Mailbox 
 
3>Scrub Mailbox 
 
1>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
2>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
3>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
0>Init Memory..... 
 
0>Init Memory..... 
 
0>Probe Dimms 
 
1>Probe Dimms 
 
2>Probe Dimms 
 
3>Probe Dimms 
 
1>Init Mem Controller Regs 
 
2>Init Mem Controller Regs 
 
3>Init Mem Controller Regs 
 
0>Init Mem Controller Regs 
 
1>Set JBUS config reg 
 
2>Set JBUS config reg 
 
3>Set JBUS config reg 
 
0>Set JBUS config reg 
 
0>IO-Bridge unit 0 init test 
 
0>IO-Bridge unit 1 init test 
 
0>Do PLL reset 
 
0>Setting timing to 6:1 9:1, system frequency 177 MHz, CPU frequency 1062 MHz 
 
 
 
SC Alert: Host System has Reset 
 
0>Soft Power-on RST thru SW 
 
0>PLL Reset..... 
 
0>Init SB 
 
0>Initialize I2C Controller 
 
0>Init CPU 
 
0>Init mmu regs 
 
0>Setup L2 Cache 
 
0>L2 Cache Control = 00000000.00f04400 
 
0>      Size = 00000000.00100000... 
 
0>Setup and Enable DMMU 
 
0>Setup DMMU Miss Handler 
 
0>Scrub Mailbox 
 
0>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
0>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>Init CPU 
 
1>      UltraSPARC[TM] IIIi, Version 2.4 
 
2>Init CPU 
 
3>Init CPU 
 
2>      UltraSPARC[TM] IIIi, Version 2.4 
 
3>      UltraSPARC[TM] IIIi, Version 2.4 
 
1>Init mmu regs 
 
2>Init mmu regs 
 
3>Init mmu regs 
 
1>Setup L2 Cache 
 
1>L2 Cache Control = 00000000.00f04400 
 
1>      Size = 00000000.00100000... 
 
2>Setup L2 Cache 
 
2>L2 Cache Control = 00000000.00f04400 
 
2>      Size = 00000000.00100000... 
 
3>Setup L2 Cache 
 
3>L2 Cache Control = 00000000.00f04400 
 
3>      Size = 00000000.00100000... 
 
1>Setup and Enable DMMU 
 
2>Setup and Enable DMMU 
 
3>Setup and Enable DMMU 
 
1>Setup DMMU Miss Handler 
 
2>Setup DMMU Miss Handler 
 
3>Setup DMMU Miss Handler 
 
1>Scrub Mailbox 
 
2>Scrub Mailbox 
 
3>Scrub Mailbox 
 
1>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
2>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
3>Timing is 6:1 9:1, sys 177 MHz, CPU 1062 MHz, mem 118 MHz. 
 
0>Init Memory..... 
 
0>Probe Dimms 
 
1>Probe Dimms 
 
2>Probe Dimms 
 
3>Probe Dimms 
 
1>Init Mem Controller Sequence 
 
2>Init Mem Controller Sequence 
 
3>Init Mem Controller Sequence 
 
0>Init Mem Controller Sequence 
 
0>IO-Bridge unit 0 init test 
 
0>IO-Bridge unit 1 init test 
 
0>Test Memory..... 
 
0>Select Bank Config 
 
0>Probe and Setup Memory 
 
0>INFO: 1024MB Bank 0, Dimm Type X4 
 
0>INFO: No memory detected in Bank 1 
 
0>INFO: 1024MB Bank 2, Dimm Type X4 
 
0>INFO: No memory detected in Bank 3 
 
0> 
 
0>Data Bitwalk on Master 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Address Bitwalk on Master 
 
0>Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.40000000. 
 
0>Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.40000000. 
 
0>Set Mailbox 
 
0>Final mc1 is 30000026.3e781c40. 
 
0>Setup Final DMMU Entries 
 
0>Post Image Region Scrub 
 
0>Run POST from Memory 
 
1>Waiting for master CPU=0, timeout in 134 seconds... 
 
2>Waiting for master CPU=0, timeout in 134 seconds... 
 
3>Waiting for master CPU=0, timeout in 134 seconds... 
 
0>Verifying checksum on copied image. 
 
0>The Memory's CHECKSUM value is 6df0. 
 
0>The Memory's Content Size value is 818f9. 
 
0>Success...  Checksum on Memory Validated. 
 
1>Select Bank Config 
 
2>Select Bank Config 
 
3>Select Bank Config 
 
1>Probe and Setup Memory 
 
1>INFO: 1024MB Bank 0, Dimm Type X4 
 
1>INFO: No memory detected in Bank 1 
 
1>INFO: 1024MB Bank 2, Dimm Type X4 
 
1>INFO: No memory detected in Bank 3 
 
1> 
 
2>Probe and Setup Memory 
 
2>INFO: 1024MB Bank 0, Dimm Type X4 
 
2>INFO: No memory detected in Bank 1 
 
2>INFO: 1024MB Bank 2, Dimm Type X4 
 
2>INFO: No memory detected in Bank 3 
 
2> 
 
3>Probe and Setup Memory 
 
3>INFO: 1024MB Bank 0, Dimm Type X4 
 
3>INFO: No memory detected in Bank 1 
 
3>INFO: 1024MB Bank 2, Dimm Type X4 
 
3>INFO: No memory detected in Bank 3 
 
3> 
 
1>Set Mailbox 
 
2>Set Mailbox 
 
3>Set Mailbox 
 
1>Final mc1 is 30000026.3e781c40. 
 
2>Final mc1 is 30000026.3e781c40. 
 
3>Final mc1 is 30000026.3e781c40. 
 
0>Data Bitwalk on Slave 1 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Data Bitwalk on Slave 2 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Data Bitwalk on Slave 3 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Address Bitwalk on Slave 1 
 
0>Addr walk mem test on CPU 1 Bank 0: 00000010.00000000 to 00000010.40000000. 
 
0>Addr walk mem test on CPU 1 Bank 2: 00000012.00000000 to 00000012.40000000. 
 
0>Address Bitwalk on Slave 2 
 
0>Addr walk mem test on CPU 2 Bank 0: 00000020.00000000 to 00000020.40000000. 
 
0>Addr walk mem test on CPU 2 Bank 2: 00000022.00000000 to 00000022.40000000. 
 
0>Address Bitwalk on Slave 3 
 
0>Addr walk mem test on CPU 3 Bank 0: 00000030.00000000 to 00000030.40000000. 
 
0>Addr walk mem test on CPU 3 Bank 2: 00000032.00000000 to 00000032.40000000. 
 
1>Setup Final DMMU Entries 
 
2>Setup Final DMMU Entries 
 
3>Setup Final DMMU Entries 
 
1>Map Slave POST to master memory 
 
2>Map Slave POST to master memory 
 
3>Map Slave POST to master memory 
 
1>FPU Registers and Data Path 
 
2>FPU Registers and Data Path 
 
3>FPU Registers and Data Path 
 
0>FPU Registers and Data Path 
 
1>FPU Move Registers 
 
2>FPU Move Registers 
 
3>FPU Move Registers 
 
0>FPU Move Registers 
 
1>FSR Read/Write 
 
2>FSR Read/Write 
 
3>FSR Read/Write 
 
0>FSR Read/Write 
 
1>FPU Block Register Test 
 
2>FPU Block Register Test 
 
3>FPU Block Register Test 
 
0>FPU Block Register Test 
 
1>Scrub Memory 
 
2>Scrub Memory 
 
3>Scrub Memory 
 
0>Scrub Memory 
 
2>Quick Block Mem Test 
 
3>Quick Block Mem Test 
 
2>Quick Test 4194304 bytes at 00000020.00000000 
 
3>Quick Test 4194304 bytes at 00000030.00000000 
 
0>Quick Block Mem Test 
 
0>Quick Test 4194304 bytes at 00000000.00600000 
 
1>Quick Block Mem Test 
 
1>Quick Test 4194304 bytes at 00000010.00000000 
 
2>Quick Test 4194304 bytes at 00000022.00000000 
 
3>Quick Test 4194304 bytes at 00000032.00000000 
 
0>Quick Test 4194304 bytes at 00000002.00000000 
 
 
2>INFO: No memory detected in Bank 1 
 
2>INFO: 1024MB Bank 2, Dimm Type X4 
 
2>INFO: No memory detected in Bank 3 
 
2> 
 
3>Probe and Setup Memory 
 
3>INFO: 1024MB Bank 0, Dimm Type X4 
 
3>INFO: No memory detected in Bank 1 
 
3>INFO: 1024MB Bank 2, Dimm Type X4 
 
3>INFO: No memory detected in Bank 3 
 
3> 
 
1>Set Mailbox 
 
2>Set Mailbox 
 
3>Set Mailbox 
 
1>Final mc1 is 30000026.3e781c40. 
 
2>Final mc1 is 30000026.3e781c40. 
 
3>Final mc1 is 30000026.3e781c40. 
 
0>Data Bitwalk on Slave 1 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Data Bitwalk on Slave 2 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Data Bitwalk on Slave 3 
 
0>      Test Bank 0. 
 
0>      Test Bank 2. 
 
0>Address Bitwalk on Slave 1 
 
0>Addr walk mem test on CPU 1 Bank 0: 00000010.00000000 to 00000010.40000000. 
 
0>Addr walk mem test on CPU 1 Bank 2: 00000012.00000000 to 00000012.40000000. 
 
0>Address Bitwalk on Slave 2 
 
0>Addr walk mem test on CPU 2 Bank 0: 00000020.00000000 to 00000020.40000000. 
 
0>Addr walk mem test on CPU 2 Bank 2: 00000022.00000000 to 00000022.40000000. 
 
0>Address Bitwalk on Slave 3 
 
0>Addr walk mem test on CPU 3 Bank 0: 00000030.00000000 to 00000030.40000000. 
 
0>Addr walk mem test on CPU 3 Bank 2: 00000032.00000000 to 00000032.40000000. 
 
1>Setup Final DMMU Entries 
 
2>Setup Final DMMU Entries 
 
3>Setup Final DMMU Entries 
 
1>Map Slave POST to master memory 
 
2>Map Slave POST to master memory 
 
3>Map Slave POST to master memory 
 
1>FPU Registers and Data Path 
 
2>FPU Registers and Data Path 
 
3>FPU Registers and Data Path 
 
0>FPU Registers and Data Path 
 
1>FPU Move Registers 
 
2>FPU Move Registers 
 
3>FPU Move Registers 
 
0>FPU Move Registers 
 
1>FSR Read/Write 
 
2>FSR Read/Write 
 
3>FSR Read/Write 
 
0>FSR Read/Write 
 
1>FPU Block Register Test 
 
2>FPU Block Register Test 
 
3>FPU Block Register Test 
 
0>FPU Block Register Test 
 
1>Scrub Memory 
 
2>Scrub Memory 
 
3>Scrub Memory 
 
0>Scrub Memory 
 
2>Quick Block Mem Test 
 
3>Quick Block Mem Test 
 
2>Quick Test 4194304 bytes at 00000020.00000000 
 
3>Quick Test 4194304 bytes at 00000030.00000000 
 
0>Quick Block Mem Test 
 
0>Quick Test 4194304 bytes at 00000000.00600000 
 
1>Quick Block Mem Test 
 
1>Quick Test 4194304 bytes at 00000010.00000000 
 
2>Quick Test 4194304 bytes at 00000022.00000000 
 
3>Quick Test 4194304 bytes at 00000032.00000000 
 
0>Quick Test 4194304 bytes at 00000002.00000000 
 
1>Quick Test 4194304 bytes at 00000012.00000000 
 
1>Flush Caches 
 
2>Flush Caches 
 
3>Flush Caches 
 
0>Flush Caches 
 
0>XBus SRAM 
 
0>IO-Bridge SouthBridge Remap Devs 
 
0>IO-Bridge Tests..... 
 
0>JBUS quick check 
 
0>       to IO-bridge_0 
 
0>       to IO-bridge_1 
 
0>IO-Bridge unit 0 sram      test 
 
0>IO-Bridge unit 0 reg       test 
 
0>IO-Bridge unit 0 mem       test 
 
0>IO-Bridge unit 0 PCI id    test 
 
0>IO-Bridge unit 0 interrupt test 
 
0>IO-Bridge unit 1 sram      test 
 
0>IO-Bridge unit 1 reg       test 
 
0>IO-Bridge unit 1 mem       test 
 
0>IO-Bridge unit 1 PCI id    test 
 
0>IO-Bridge unit 1 interrupt test 
 
0>IO-Bridge unit 0 init      test 
 
1>IO-Bridge unit 0 sram      test 
 
1>IO-Bridge unit 0 reg       test 
 
1>IO-Bridge unit 0 mem       test 
 
1>IO-Bridge unit 0 PCI id    test 
 
1>IO-Bridge unit 0 interrupt test 
 
1>IO-Bridge unit 1 init      test 
 
1>IO-Bridge unit 1 sram      test 
 
1>IO-Bridge unit 1 reg       test 
 
1>IO-Bridge unit 1 mem       test 
 
1>IO-Bridge unit 1 PCI id    test 
 
1>IO-Bridge unit 1 interrupt test 
 
1>IO-Bridge unit 0 init      test 
 
2>IO-Bridge unit 0 sram      test 
 
2>IO-Bridge unit 0 reg       test 
 
2>IO-Bridge unit 0 mem       test 
 
2>IO-Bridge unit 0 PCI id    test 
 
2>IO-Bridge unit 0 interrupt test 
 
2>IO-Bridge unit 1 init      test 
 
2>IO-Bridge unit 1 sram      test 
 
2>IO-Bridge unit 1 reg       test 
 
2>IO-Bridge unit 1 mem       test 
 
2>IO-Bridge unit 1 PCI id    test 
 
2>IO-Bridge unit 1 interrupt test 
 
2>IO-Bridge unit 0 init      test 
 
3>IO-Bridge unit 0 sram      test 
 
3>IO-Bridge unit 0 reg       test 
 
3>IO-Bridge unit 0 mem       test 
 
3>IO-Bridge unit 0 PCI id    test 
 
3>IO-Bridge unit 0 interrupt test 
 
3>IO-Bridge unit 1 init      test 
 
3>IO-Bridge unit 1 sram      test 
 
3>IO-Bridge unit 1 reg       test 
 
3>IO-Bridge unit 1 mem       test 
 
3>IO-Bridge unit 1 PCI id    test 
 
3>IO-Bridge unit 1 interrupt test 
 
3>Print Mem Config 
 
1>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON. 
 
1>Memory interleave set to 0 
 
1>      Bank 0 1024MB : 00000010.00000000 -> 00000010.40000000. 
 
1>      Bank 2 1024MB : 00000012.00000000 -> 00000012.40000000. 
 
2>Print Mem Config 
 
2>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON. 
 
2>Memory interleave set to 0 
 
2>      Bank 0 1024MB : 00000020.00000000 -> 00000020.40000000. 
 
2>      Bank 2 1024MB : 00000022.00000000 -> 00000022.40000000. 
 
3>Print Mem Config 
 
3>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON. 
 
3>Memory interleave set to 0 
 
3>      Bank 0 1024MB : 00000030.00000000 -> 00000030.40000000. 
 
3>      Bank 2 1024MB : 00000032.00000000 -> 00000032.40000000. 
 
0>Print Mem Config 
 
0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON. 
 
0>Memory interleave set to 0 
 
0>      Bank 0 1024MB : 00000000.00000000 -> 00000000.40000000. 
 
0>      Bank 2 1024MB : 00000002.00000000 -> 00000002.40000000. 
 
0>INFO: 
 
0>      POST Passed all devices. 
 
0> 
 
0>POST: Return to OBP. 
 
 
 
SC Alert: Host System has Reset 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying 
_______________ 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs 
 
POST Results: Cpu 0000.0000.0000.0003 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0002 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0001 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
POST Results: Cpu 0000.0000.0000.0000 
 
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.54ae %o2 = ffff.ffff.ffff.ffff 
 
Membase: 0000.0000.0000.0000 
 
MemSize: 0000.0000.0004.0000 
 
Init CPU arrays Done 
 
Init E$ tags Done 
 
Setup TLB (small-footprint mode) Done 
 
MMUs ON 
 
Scrubbing Tomatillo tags... 0 1 
 
Find dropin, Copying Done, Size 0000.0000.0000.7100 
 
PC = 0000.07ff.f000.5f48 
 
PC = 0000.0000.0000.6048 
 
Find dropin, Copying Done, Size 0000.0000.0001.1770 
 
Diagnostic console initialized 
 
Configuring system memory & CPU(s) 
 
 
 
RED State Exception 
 
Error enable reg: 0000.0000.0000.0000 
 
CPU: 0000.0000.0000.0001 
 
TL=0000.0000.0000.0005 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0004 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4200 TnPC=0000.0000.f000.4204 TSTATE=0000.0044.1500.1500 
 
TL=0000.0000.0000.0003 TT=0000.0000.0000.0010 
 
   TPC=0000.0000.f000.4c90 TnPC=0000.0000.f000.4c94 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0002 TT=0000.0000.0000.0064 
 
   TPC=0000.0000.b214.19e0 TnPC=0000.0000.b214.19e4 TSTATE=0000.0044.1504.1400 
 
TL=0000.0000.0000.0001 TT=0000.0000.0000.0068 
 
   TPC=0000.0000.f000.1240 TnPC=0000.0000.f000.1244 TSTATE=0000.0044.1500.0400 
 
 
 
Could not read diag-switch? from NVRAM! 
 
Could not read diag-level from NVRAM! 
 
Could not read diag-script from NVRAM! 
 
Could not read security-mode from NVRAM! 
 
Could not read service-mode? from NVRAM! 
 
Could not read diag-trigger from NVRAM! 
 
Could not read verbosity from NVRAM! 
 
@(#)OBP 4.17.2 2005/07/21 12:29 Sun Fire V440,Netra 440 
 
Clearing TLBs

--------------
Last some line repeat
How to get ok> prompt ?
What is the problem with "Error enable reg"?
The google don't give me an answer!
Thanks for reply

Last edited by DukeNuke2; 05-30-2009 at 10:29 AM.. Reason: added code tags
# 2  
Looks like you need a new NVRAM chip or else at new battery for it at least. If you have another Sun machine with the same NVRAM chip model it would be worth swapping them to prove whether what I suspect is correct or not. If the NVRAM chip in this machine is definitely faulty then it can be worth cutting open the top and attaching a watch battery in place of the internal battery if you can do a bit of hardware? Take a look at: NVRAM Battery Fix FAQ and Sun 3/80 NVRAM. The fact that your NVRAM can't be read rather than just giving an empty hostid, etc means that it is probably more faulty than just having a flat battery.
# 3  
Quote:
Originally Posted by TonyFullerMalv
Looks like you need a new NVRAM chip or else at new battery for it at least. If you have another Sun machine with the same NVRAM chip model it would be worth swapping them to prove whether what I suspect is correct or not. If the NVRAM chip in this machine is definitely faulty then it can be worth cutting open the top and attaching a watch battery in place of the internal battery if you can do a bit of hardware? Take a look at: NVRAM Battery Fix FAQ and Sun 3/80 NVRAM. The fact that your NVRAM can't be read rather than just giving an empty hostid, etc means that it is probably more faulty than just having a flat battery.
First of all thanks for reply.
I haven't messages on console like show in "NVRAM Battery Fix FAQ", but I'd like to do something with battery.
How about the other faulty?
I suppose I should take a ok> prompt with faulty nvram like show above
# 4  
try use a SUN keyboard and use Stop+A sequence,
poweroff and replace the NVRAM,
type printenv and ensure auto-boot? is false and diag-level is min
# 5  
Nvram

I can't find NVRAM in my Sun Fire V440. I found something similar on ALOM card. Can I work and Install Solaris with that error NVRAM?
# 6  
Hi

the message:
0>POST: Return to OBP.

SC Alert: Host System has Reset

Could not read diag-switch? from NVRAM!

shows you error. The ALOM is okay, the POST has run, then the
server will return to OBP, therefor he reads the contents of the NVRAM.
But your NVRAM is flashed, you can't boot or install Solaris, cause
the NVRAM is the BIOS of the V440, where all pathes and infos for
your hardware is been saved.
The only way is to install a new NVRAM, you need a support contract
and a service call, or a new motherboard.

cu
lowbyte
# 7  
SC card

How about system configureation card (SCC)? Can I wotk without it an install OS?
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #515
Difficulty: Easy
A variable's type (or data type) is the characterization of the data that it represents.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies

2. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies

3. Solaris

Sun-Fire V440 boot disk issue

Hi, I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken. Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies

4. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

5. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

6. Solaris

ALOM wont work when KVM connected to Sun Fire V440 server

Hi, I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection. ... (0 Replies)
Discussion started by: jimmy54321
0 Replies

7. Solaris

error messages in Sun Fire V440

Hello, I am seeing error messages in V440 (OS = solaris 8). I have copied here : The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day.. I... (5 Replies)
Discussion started by: upengan78
5 Replies

8. Solaris

Sun Fire T 2000 Booting problem

Dear All, I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae Error:Last Trap: Instaruction Access Exception {0} ok boot cdrom Boot device:... (6 Replies)
Discussion started by: solaris8in
6 Replies

9. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies

10. Solaris

Sun Fire V440 and Patch 109147-39

Got an curious issue. I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on. The patch modified mainly the linker libraries and commands. ... (2 Replies)
Discussion started by: BOFH
2 Replies

Featured Tech Videos