sleepy Ultra 60 Machine

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Help with fetching the data from remote machine from my jumpbox(local machine)

Team, Presently i am running a script from my local box(i.e jumpbox) to all the remote machines.Basically fetching basic queries like pwd,mkdir,touch etc and i am able to successfully fetch it from my local machine.But when i want to check certain database related queries like the dbstat...

2. Red Hat

iptables applied in local machine, can't ssh remote machine after chain changed to DROP

I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99 Source Destination was UP, with IP 192.168.1.15. This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's because I need to apply the same rules in...

3. Linux

Unable to connect to Server machine from a client machine using ftp service

Hi, Could you please help me with the below issue.. I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1). I'm trying to connect to server from the client machine using ftp service. I have installed vsftpd daemon on both the machines. I'm getting...

4. Ubuntu

Sudo issues with Ubuntu 7.10 Running on a Ultra SPARC Machine

I have a Sun Blade 1000 machine that I installed Ubuntu 7.10 SPARC onto. The only user configured (configure during install) cannot use sudo. When I try to issue a command using sudo (ex. sudo apt-get install) it asks me for my password and returns the error "user not found in sudoers file". I need...

5. Shell Programming and Scripting

How to transfer files from unix machine to local machine using shell script?

Hi All.. Am new to Unix!! Am creating a shell script in which a scenario is like i have transfer the output file from unix machine (Server) to local directory (Windows xp). And also i have to transfer the input file from the local directory to Unix machine (Server) Any help from you...

6. Shell Programming and Scripting

shell script to copy files frm a linux machine to a windows machine using SCP

I need a shell script to copy files frm a linux machine to a windows machine using SCP. The files keeps changing day-to-day. I have to copy the latest file to the windows machine frm the linux machine. for example :In Linux, On July 20, the file name will be 20.txt and it should be copied to...

7. Red Hat

To find the LATEST file from a dir on REMOTE machine and SCP to local machine?

Hi All, URGENT - Please help me form a scipt for this: I need the LATEST file from a dir on REMOTE machine to be SCP'd to a dir on local machine. (and I need to execute this from local server) I know that the below cmd is used to find the LATEST file from a dir. But this command is not...

8. Debian

Problem installing Debian5 on an ultra sparc machine

Comments/Problems: Machine boots from CDROM, starts SILO Version 1.4.13, display welcome message (welcome to Debian GNU/Linux lenny! built on 20081218-10:06 ). boot: Allocated 8 Megs of memory at 0x40000000 for kernel Loaded kernel version 2.6.26 Loading initial ramdisk...

9. Solaris

In Sparc Ultra 45 machine, how to enable bge1

In Sparc Ultra 45 machine, how to enable bge1 port, how to do if bge0 is down then bge1 should automatically up. Thanks & Regards

10. Solaris

I need to clone an ultra 1 onto and ultra 60

I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this? Frank P.S. If you know of a document somewhere please let me know.

LEARN ABOUT DEBIAN

esp

ESP(4)							   BSD Kernel Interfaces Manual 						    ESP(4)

NAME

     esp -- Qlogic FEPS and FAS366 SCSI driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device esp

HARDWARE

     The esp driver provides support for the Qlogic FAS216 and FAS408 SCSI controller chips found in a wide variety of systems and peripheral
     boards.  This includes the Qlogic SCSI cards found in most Sun Ultra 1e and Ultra 2 machines.

     For Qlogic PCI SCSI host adapters, the isp(4) driver should be used in place of the esp driver.

IMPLEMENTATION NOTES

     During the boot sequence, the esp driver searches the linked list for LUN info by LUN ID.	At this point the driver will attach on that
     instance, and then attempt to attach every sub-device.

     There are at least 4 variations of the configuration 3 register.  A second config register must be loaded to inquire the chip revision, oth-
     erwise the ncr53c9x_reset() function will not set the defaults correctly.

     The drive attach routine attempts to set the appropriate bit to put the chip into Fast SCSI mode so that it does not have to be figured out
     each time.  This will then be stored in the NCR registers for later use.

     The esp driver makes use of the LSI 64854 DMA engine which contains three independent channels designed to interface with an NCR539X SCSI
     controller; an AM7990 Ethernet controller; and certain types of parallel port hardware.  As such this driver may eventually replace the
     amd(4) driver for network hardware.

DIAGNOSTICS

     The following driver specific error messages may be reported:

     esp: cannot map %d segments  The device was unable to map segments while mapping the SCSI devices in DMA mode.

     unknown variant %d, devices not attached  An unknown version of the card was found and devices will not be attached.

     Unhandled function code %d  The device returned a function code which the driver is unable to handle, most likely during negotiation.

     esp:%d:%d: selection failed %d left in FIFO  The target left the command phase prematurely.  If a command did not reach the device then it
     will be reported as shown above.

     invalid state: %d	The device has reached an invalid state.

SEE ALSO

     amd(4), isp(4), scbus(4), camcontrol(8)

     http://www.qlc.com/
     http://www.sun.com/

HISTORY

     The esp driver was written for NetBSD by Eric S. Hvozda.  The esp driver was then ported to FreeBSD 5.3 by Scott Long <scottl@FreeBSD.org>.

AUTHORS

     This manual page was written by Tom Rhodes <trhodes@FreeBSD.org> instead of porting the original from NetBSD.

BUGS

     The esp driver includes the sbus front-end but lacks the PCI front-end.  Thus it can only support the FEPS/FAS366 SCSI found in Sun Ultra 1e
     and Ultra 2 machines at this time.

     This driver should eventually replace the amd(4) driver, but that requires porting the PCI front-end mentioned above.

BSD
								September 18, 2005							       BSD

Solaris BigAdmin RSS