RHEL 5 Fiber Chanel Multipath Configuration with Sun StoreEdge 6000 arrays.
A step by step guide on how to attach a Sun StorEdge 6000 series array to a Red Hat Enterprise Linux Server (Sun Hardware or not). Note that Red Hat RDAC drivers can be found at http://www.lsi.com/rdac/ds4000.html
I need to configure snmptrap on rhel 8 server and send trap to nimsoft for file system , memory and cpu load and network diconnection status.
please help me, if any one configured. (1 Reply)
Hi,
In a RHEL 5 box, I have just added new multipath configurations in /etc/multipath.conf :
blacklist_exceptions {
wwid "360002ac0000000000000008e0001ee00"
wwid "360002ac0000000000000008f0001ee00"
wwid "360002ac000000000000000900001ee00"
wwid... (0 Replies)
Hi all,
I'm wondering if anyone knows whether Solaris IPMP can be configured such that the IPs of the physical NICs are not available to applications when using IP4 or if the group address and the underlying physical address are always present?
Thanks. (3 Replies)
Hello all,
I am running "Red Hat Enterprise Linux Server release 6.4 (Santiago)"
The root Filesystem is currently part of the Multipath configuration and I need to remove it without rebooting the production Server.
The wwid I want to remove from Multipathing is the last one i the list of... (3 Replies)
Hi,
Can someone please help me configuring RIP (Routing Information Protocol v2 ). I have tried few manuals and posts from networking sites and i didnt get a clear picture.
This is what i have done:
1. Installed routed package and started routed service.
however, Dynamic routes are... (1 Reply)
hello,
I have installed RHEL 6.0 on my lappy in a separate partion with windows 7 on the hardware(not using VMWARE).Now kindly help me to active network configuration in that?????Is it require to have LINUX wireless drivers???? (1 Reply)
Hi all,
I am looking at the specific configuration settings for multipath.conf on RHEL5.5.
In particular i was looking at the max_fds setting. Can anyone tell me the max number of open file descriptors that the RHEL5.5 system can have?
It has been set previously to 8192, and i was... (4 Replies)
Hi,
I'm trying to configure NTP client, however it failes to sync correctly.
Even after I manually set the time, once it connects with the NTP server, it pushes the time ahead by 4 hours.
We have set an AIX host as NTP server. It works fine for other AIX hosts, however fails on RHEL 5.4
... (4 Replies)
RHNREG_KS(8) Red Hat Linux System Manual RHNREG_KS(8)NAME
rhnreg_ks - a program for non interactively registering systems to Red Hat Network
SYNOPSIS
rhnreg_ks [OPTION]... [PACKAGE NAME]...
DESCRIPTION
rhnreg_ks is a utility for registering a system with the Red Hat Network. It is designed to be used in a non-interactive enviroment (a
kickstart style install, for example). All the information can be specified on the commandline or stdin.
--profilename
Specify the profilename that should be used as an identifier for the system in Red Hat Network
--username
The username to register the system with under Red Hat Network. This can be an existing Red Hat Network username, or a new username.
--password
The password associated with the username specified with the --username option. This is an unencrypted password.
--orgid
Specify an organizational id of the org to register this system under. This is optional, and only used if registered a system to an
existing Red Hat Network organization.
--orgpassword
The password assocated with the orgig specified with the --orgid option. This is an unencrypted password.
--email
The email address associated with the username specified iwth the --username option.
--serialnumber
Specify a servial number to associate with the system. This is optional, and only useful when combined with an orgid.
--contactinfo
Read contact info from standard in. The format is one entry per line, colon seperated. Valid options are reg_num, title, first_name,
last_name, company, position, address1, address2, city, state, zip, country, phone, fax, contact_email, contact_mail, contact_phone,
contact_fax, contact_special, contact_newsletter.
--nohardware
Do not probe or upload any hardware information.
--nopackages
Do not profile or upload any package information.
--force
Register the system even if it has already been registered.
--version
Show the version fo rhnreg_ks
--proxy
Specify a http proxy to use.
FILES
/etc/sysconfig/rhn/up2date
Configuration settings for up2date and rhnreg_ks
/usr/share/rhn/RHNS-CA-CERT
The ssl certificate authority file used by rhnreg_ks to validate the Red Hat Network ssl servers.
EXAMPLES
The following registers a new system to Red Hat Network.
rhnreg_ks --profilename "example_profile_name" --username "someexampleuser@example.com" --password "foobar"
The following examples registers a new system to Red Hat Network including contact info.
rhnreg_ks --profilename "example_profile_name" --username "someexampleuser@example.com" --password "foobar" --contactinfo < contactinfo
where the file "contactinfo" contains data in the format:
first_name: Billy
last_name: Bob
company: SomeCompanyName
city: Springfield
fax: 555-5555
phone: 555-5555
SEE ALSO
Configuration can be done via up2date --configure. rhnreg_ks is used to register a system to Red Hat Network. Visit <http://rhn.red-
hat.com> for access or to sign up. You can also run up2date to register a system with Red Hat Network.
Authors
Written by Adrian Likins <alikins@redhat.com>
REPORTING BUGS
Report bugs to <http://bugzilla.redhat.com>.
COPYRIGHT
Copyright (C) 1999-2002 Red Hat, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
4th Berkeley Distribution Wed 10 April 2002 RHNREG_KS(8)