ATA over Ethernet driver 64 (For Linux 2.6 branch)


 
Thread Tools Search this Thread
Special Forums News, Links, Events and Announcements Software Releases - RSS News ATA over Ethernet driver 64 (For Linux 2.6 branch)
# 1  
Old 08-22-2008
ATA over Ethernet driver 64 (For Linux 2.6 branch)

This driver allows the Linux kernel to use the ATA over Ethernet (AoE) network protocol. Using AoE, a Linux system can use AoE block devices like EtherDrive (R) storage blades. The block devices appear as local device nodes (e.g. /dev/etherd/e0.0). License: GNU General Public License (GPL) Changes:
The compatibility system was generalized. Support for the 2.6.26 Linux kernel was added.Image

More...
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question
SMSC(4) 						   BSD Kernel Interfaces Manual 						   SMSC(4)

NAME
smsc -- USB SMSC LAN9xxx Fast Ethernet driver SYNOPSIS
To load the driver as a module at boot time, place the following line in loader.conf(5): if_smsc_load="YES" Alternatively, to compile this driver into the kernel, place the following lines in your kernel configuration file: device uhci device ohci device usb device miibus device smsc DESCRIPTION
The smsc device driver provides support for USB Fast Ethernet adapters based on the SMSC LAN9xxx chipsets. For more information on configuring this device, see ifconfig(8). HARDWARE
The following devices are supported by the smsc driver: o SMSC LAN9500, LAN9500A, LAN9505 and LAN9505A based Ethernet adapters o SMSC LAN89530, LAN9530 and LAN9730 based Ethernet adapters o SMSC LAN951x Ethernet adapters with integrated USB hub SEE ALSO
arp(4), intro(4), miibus(4), netintro(4), usb(4), ifconfig(8) HISTORY
The smsc device driver first appeared in FreeBSD 10.0. AUTHORS
The smsc driver was written by Ben Gray <bgray@FreeBSD.org>. BSD
September 26, 2014 BSD