Search Results

Between Building A Solaris 10 Recovery DVD - Phoronix (http://www.phoronix.com/scan.php?page=article&item=867&num=4) and placing the sysidcfg file in /etc of the miniroot (as opposed to following the...

I want to have a bootable DVD that will perform a jumpstart install of Solaris 10 x86 I've mainly used JumpStart DVD (with Solaris flash archive) for x86 platform...

The interfaces are unplumbed and unconfigured. But the kernel is seeing and registering them at boot.

Solaris 10 x86 VM was shipped with four NICs, two each teamed together. We don't want or need. I ifconfig downed e1000g2 and e1000g3 and removed their /etc/hostname.* entries. But the kernel still...

We received a VM running Solaris 10 After reconfiguring network interfaces to get it on our network, we're getting "pam_unix_cred: cannot load ttyname Error 0" when any accountt ries to log in at...

If you have a system with one network interface, and you want to allow ssh from some addresses, freeipa-ldap from others, and https (which is part of freeipa-ldap) from another one; and you do not...

For the next poor sod who runs into a jumpstart problem... the answer turned out to be:

auto_reg=none {
}


I kid you not, curly braces with nothing between them.

I've followed a few guides and have what appears to be a working jumpstart server. I can PXE boot a bare system, it gets an IP and launches the installer. However, it takes me to the screen:

...

It does show two entries like:


pci bus 0x000a cardnum 0x00 function 0x00: vendor 0x1137 device 0x0045
Cisco Systems Inc VIC FCoE HBA

The chassis config is right... this blade can boot to VMware ESXi and see HBAs and LUNs. Solaris isn't seeing the HBAs at all... luxadm probe returns ERROR: No Fibre Channel Adapters found.
fcinfo...

Precisely :D I have Solaris 11 installed on a laptop and am going to install on a beefy desktop, but I gotta know the ALOM stuff too.

Right, but what's the next server that will have a DVD and,...

What's the cheapest box to study for the Solaris tests with? The obvious answer is a T1000, but IIRC they have no CD/DVD and have to be jumpstarted. What's cheap that can run Solaris 11 and that...

jnojr@solaris:~$ fdisk -v -W - /dev/rdsk/c2t0d0p0
* /dev/rdsk/c2t0d0p0 default fdisk table
* Dimensions:
* 512 bytes/sector
* 56 sectors/track
* 224 tracks/cylinder
* 39869...

Err, the slices live in the ZFS pool. 's' is for slice, 'p' is for partition. This is a partition, not a slice ;-)



There's a single disk and no NFS. There are no other controllers or...

I have a laptop I'm setting up to multi-boot between Win 7, Solaris 11, Ubuntu 14.04, and CentOS 7. I have a common FAT32 partition for all of them to save data to. I'm less familiar with Solaris and...

In Mavericks, Apple has apparently moved control of log rotation to ASL. There's a 'ttl' value to determine how long log files will stick around for. I can compress them, change the way they're...

Our Network Security folks have mandated that we "Kerberize" our systems to allow them to perform an authenticated scan. This consists of instructions to change /etc/pam.d/sshd from:

# sshd: auth...

Still not following.

AFAIK, the "!-ipfw" is saying, "Anything but ipfw logs" And then, at the bottom, "!ipfw" would be, "OK, start worrying about those logs again"

The last line to log *.* to...

Sorry, I'm not grokking what you're saying :)

I'm trying to get all ipfw logs going to ipfw.log I've managed that, but ipfw.log is also getting stuff that shows up in system.log


!-ipfw...

Actually, a better recipe:

# IPFW logs
? [= Sender kernel] [A= Message ip] file /var/log/ipfw.log
? [= Sender kernel] [A= Message ip] ignore

# kernel messages get saved in system.log
? [=...

Above examples are for '*', to catch EVERYTHING. I'm going to wind up with an unknown number of files in /tmp/ called file_sw_list, file2_sw_list, etc. etc.



It would be a pretty freaky...

for file in `ls /tmp/*_sw_list`; do
/usr/bin/sed -i '' '1,/^Software\ Update/d' $file
done

In my script, this doesn't work. I can copy-and-paste it, and it works. Enabling debugging shows it...

No, it doesn't.



All due respect, but no... you don't know what the term "deprecated" means. Please look it up. ipfw is there, it works, and having its' logs sent to a different destination...

I'm probably just not thinking of the correct term to search for :-) But I want to match a pattern that might be 'ABC' or '1ABC' there might be three characters, or there might be four, but if...