Search Results

11 server each create 1 transfer file, containing all file changes done during the day.

11 servers each connect to the other servers so as to receive this transfer file and process the update to...

11 servers each create a single transfer file of all "file" changes done to the local file that day. Earily morning transfers are done of the Internet and each server site receive the daily...

I need to revise a transfer process. I have 11 "remote" servers all transfering 1 transfer file nightly. Now, this need to be more "automatic" in that the transfers need to "catch" all missed...

I have a RHEL 5.2 server that I need to connect a new HP Laserjet p2035n networked printer. I can not install the latest version of 'hplip' since it generates an error (missing lib....) Does anyone...

Not aware on how your RAID was set up but if it is using a hardware RAID controller card, then the controller will take the replacement drive and make it ready to replace the "defective" drive. This...

Note that Red Hat, like most Linuxes, come with the CUPS printer control installed right out of the box. CUPS is more complete than what HPNP ever had.

Can you provide an example?

A quick way, but not a true verify, is the list out the contents to a file:

tar tvf /dev/[tape drive name] > /log/tpbkup.log

where you replace the [tape drive name] with the correct name of...

The server has OpenServer 5.0.5 which does not have ssh natively and it was never installed. It is on its way out from my server "park."

I'm not wanting to find how to fix this on my old server. I want to transfer off my old server. I wonder if this is can be cause by the 2GB file limit.

As you can see, the fiile (1073741312 Apr 25 11:03 file.tar) does not appear to be complete. The file system still has room:

# dfspace
/ : Disk space: 11026.95 MB of 17389.48 MB available...

Tar to a file (tar Cvf nome.tar dirname) is commonly called "tarball." As I have posted, both tar and cpio will not complete. The following occurs during the process:

Signal 31 - core dumped
#...

All SCSI tape drives do not require any drivers for it. You just need to know which SCSI host adapter that you are connecting it to. Check which SCSI host adapter you have / buy and make sure you...

I too experience a bugged up DAT drive. My brand new IBM x3200 server is on its third DAT 72 drive (replaced twice so far.) The original drive was requesting a "cleaning" daily and during the...

I need to transfer software off a SCO OpenServer 5.0.5 server. I can not seem to read this server's tape on my other server since the tape drive (IBM Gen 5 DAT 72GB) will continuosly "eject" this...

If you will be buying an new operating system, shouldn't you consider getting SCO OpenServer 6.0.0. This is based on UnixWare and is "supposed" to let binary compatibility wih OpenServer 5.

I would stay away from Caldera. They were the ones who purchased SCO and then went after the Linux users for copyright infringement.

SCO is not like most versions of Linux. Network changes force a kernel relink since network drivers on in the kernel.

The IP address need to be at the <......>.

So line:

/etc/route add...

To connect by telnet correctly (port 23) you need to have the default gateway correctly set in you SCO 5 server. Version before 5.0.7 may not correctly use the default gateway stored in your...

You need to verify that the serial port are correctly "active" in the server's BIOS/CMOS

Then, you need check to see if the serial ports are set up within SCO 5.0.5 with 'mkdev serial'

After,...

You would assume that the "initialize hard drives" as part of the RAID controller configuration would do the low-level format? That is what most SCSI RAID controllers do. I guess it is different...

With SCO 6.0.0 install, the teo PCIe gives errors during start-up. After MP3, 'hw' lists them as "simple communication" after. Does this tell me that the parallel ports are working?

I've seen the quite often. The drive itself is failing. Cleaning cartridges may not help

If you can, get the drive replaced either under sometype of warranty, or but a new one.:(

How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one)...

Just completed the install of the second drive. As per to article, the drive had something blocking the mbr / superblock that somehow the mkdev hd did not clear. Even the fdisk write to the master...