Search Results

Thank you all for your assistant apparently our ISP most host our reverse DNS and did not have this zone created. After running the DNS reverse tool from DNSStuff.com.

We have Unix configured as our external DNS, forward DNS is working properly, however Reverse lookup is not working. Any idea what the problem is? I have checked the named.boot and .rev file and...

I solved my problem by using
route add -net 172.16.16.0 172.16.17.224
leaving the subnet mask out and it work fine.

WE are running Unix - Solaris 2.6, we create a subnet. In the windows enviroment we are able to add a static route by using
route add -p 172.16.10.0 mask 255.255.255.0 172.16.17.224, but when we...

After trying serveral null modem cable, we finally rebooted the server and had it idle for 10 minutes. Turned it back on, it recognized the cable and we were in. It appear that the file system was...

You are right I don't have a console on the server. I am next to the box, I have a laptop connected to the serial connection using null modem cable. However, when using hyperterminal and changing...

Yesterday, we had an outage and Solaris 8 Sunfirer Server. Now today we can telnet, ftp or rhost in the server. We are getting error message connection refused for each connection. Is there any...

When tyring to find out what the status link on the NIC I receive an error message
ndd /dev/hme
Couldn't push module 'hme', no such device or address
cd /dev
ls -l hme
lrwxrwxrwx 1 root...

How do I change the NIC from 100 full-duplex to autonegotiate?

We have subnetted our Internal Network. We used an I.P. range of 172.16.16.0-254, 172.16.17.0-254, 172.16.18.0-254, 172.16.19.0-254 and mask 255.255.252.0. We created a subnet range of...

Thank you for your response to this problem. The problem has been resolved. It appears that our unix server had a restrict set that did not allow a workstation to connect via FTP Or Telnet if it...

We have tried everything you listed, except for reboot and nothing helps. We will reboot over the weekend and I will keep you posted.

The configuration for the subnet mask, default gateway, DNS, WINS is the right IP address in DHCP. I have not done anything with routing table we are on a flat network the only router we have goes...

The subnet range was in the host.allow, typed in the ip address of the client that was failing. Still no response, it connects to the port 21 and receives a message that "host lost connection". ...

We are running inetd.conf (1m) 1.2.7 SRV 4.0.1.5
Yes I can do a nslookup back to the client from the FTP Server
I not sure if we are running TCP wrapper or not but from what I can tell we are...

I can ping by name and I can use nslookup to find the server. It appears that if Windows 2000 DHCP issued out the i.p. our Unix FTP server refuses the connection

We have moved our DNS and DHCP to Windows 2000 from BIND. Our FTP Server is running Solaris 2.6, users who receive an i.p. address from win2k DHCP receives a connection failed error when trying to...