Separate HDD test using RAID controller

10 More Discussions You Might Find Interesting

1. SCO

SCO OS 6 Driver for LSIL SAS1064E Raid Controller

Hi all, A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password. Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore. I tried to boot with the CD Rom, then "Tools", then exit to...

2. Shell Programming and Scripting

Controller is not going into IF test

Hi All, I am searching for some files (*.sem and *.chk and *.temp) in morethan one directories. if i found .sem and .chk files(base name should be same) i am deleting these 2 files because i need to delete .chk files if i found respective .sem file i am also deleting other .sem files only...

3. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i...

4. AIX

Internal PCI X RAID Controller issue ?

Hello folks, Could someone tell me why I unable to create pdisks for a RAID Array # lscfg | grep scsi + sisscsia0 U787A.001.DPM0707-P1 PCI-X Dual Channel Ultra320 SCSI Adapter + scsi0 U787A.001.DPM0707-P1-T10 PCI-X Dual Channel Ultra320 SCSI Adapter...

5. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

6. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ...

7. Red Hat

linux server with raid controller card

I am planning on building a fedora box with raid controller (database server). Is anybody done that ? also what kind of software do you need to backup and recover data.

8. Solaris

RAID controller needed for SVM?

hi this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network) i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to...

9. SCO

driver needed for hp smartarry p200i sas raid controller

recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help.

10. SCO

ultra 320 scsi raid controller driver for sco 5.0.6

I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller . how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6. Plz help with any idea karzon

LEARN ABOUT FREEBSD

ataraid

ATARAID(4)                                                 BSD Kernel Interfaces Manual                                                 ATARAID(4)

NAME

     ataraid -- ATA software RAID support

SYNOPSIS

     device ata
     device ataraid

DESCRIPTION

     The ataraid driver provides support for so-called software RAID (sometimes referred to as fake RAID or pseudo RAID).

     When a controller that supports software RAID is instructed to create a RAID array, its BIOS writes data structures in a specific metadata
     format to the disks.  These data structures are picked up by the ataraid driver, so that FreeBSD can work with the array.  The ataraid driver
     has to understand the specific metadata format of a controller BIOS in order to support its RAID capabilities.

     Read-only support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations.  Creation and
     rebuild of such arrays has to be done from the controller BIOS.

     Read and write support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations.  Additionally,
     the atacontrol(8) utility can be used to create, rebuild, update and fail such RAID arrays.

     The ataraid driver can read the following metadata formats:

     o   Adaptec HostRAID
     o   Highpoint V2 RocketRAID
     o   Highpoint V3 RocketRAID
     o   Intel MatrixRAID
     o   Integrated Technology Express (ITE)
     o   JMicron
     o   LSI Logic V2 MegaRAID
     o   LSI Logic V3 MegaRAID
     o   NVIDIA MediaShield
     o   Promise FastTrak
     o   Silicon Image Medley
     o   Silicon Integrated Systems (SiS)
     o   VIA Tech V-RAID
     o   FreeBSD PseudoRAID

     The ataraid driver can write the following metadata formats:

     o   Highpoint V2 RocketRAID
     o   Intel MatrixRAID
     o   JMicron
     o   Promise FastTrak
     o   Silicon Integrated Systems (SiS)
     o   VIA Tech V-RAID
     o   FreeBSD PseudoRAID

     It is also possible to use software RAID on controllers that do not have special software RAID capabilities.  See atacontrol(8) for details.

FILES

     /dev/ar*  ATA RAID device nodes

SEE ALSO

     ata(4), atacontrol(8)

CAVEATS

     RAID5 is not supported at this time.  Code exists, but it neither uses nor maintains parity information.

AUTHORS

     The ataraid driver was written by Soren Schmidt <sos@FreeBSD.org>.  This manual page was written by Christian Brueffer
     <brueffer@FreeBSD.org>.

BSD                                                              February 17, 2006                                                             BSD

Red Hat