Sometime i see that the boot process hangs.
I am using rhel 6.2.
At that time in the console i see
HTML Code:
Probing EDD (edd=off to disable)...
SSH service seems to be started but i can't login...
ssh logs (last lines) in verbose mode level 3:
HTML Code:
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Offering public key: /root/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug3: Wrote 368 bytes for a total of 1477
The RedHat 6 Technical Notes suggest to try to boot the kernel with the parameter
so you might try that. But it looks to me like you have broken hardware. If that kernel parm doesn't work I would lean toward a hardware problem.
I would not disable a bunch of features just for the heck of it. First I would try the "pci=noaer" by itself. The pci express error reporting is new to redhat 6 and redhat's docs suggest to turn it off to address a kernel hang somewhat similiar to yours. This is my reason to suggest disabling it. If that didn't work, maybe I would try something else. But I would try one change at a time. Then if it starts working you know which change fixed it.
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (6 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (1 Reply)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (0 Replies)
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)