Login or Register to Ask a Question and Join Our Community


Red Hat

Lost CPU CORES

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Linux Red Hat Lost CPU CORES
# 1  
Old 09-10-2011
Question Lost CPU CORES
Hey all,

Code:
dmidecode | grep -i CPU
        Socket Designation: CPU 0
        Version: Intel(R) Xeon(R) CPU           E5530  @ 2.40GHz
        Socket Designation: CPU 1
        Version: Intel(R) Xeon(R) CPU           E5530  @ 2.40GHz

cat /proc/cpuinfo | grep -i cpu
cpu family      : 6
model name      : Intel(R) Xeon(R) CPU           E5530  @ 2.40GHz
cpu MHz         : 1600.000
cpu cores       : 1
cpuid level     : 11


I expected 2 cpu's with 8 cpu cores and I have only one !!!

Any idea were to look Smilie
Last edited by pludi; 09-10-2011 at 06:42 PM..
# 2  
Old 09-10-2011
What version of RHEL are you using?
# 3  
Old 09-10-2011
Please post the full output of these commands (without the grep filter in your first post):

Code:
dmidecode

Code:
cat /proc/cpuinfo

# 4  
Old 09-10-2011
Lightbulb hope this will get as a light
Code:
cat /proc/cpuinfo
 
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5530 @ 2.40GHz
stepping : 5
cpu MHz : 1600.000
cache size : 8192 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc up arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips : 4801.16
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
 
dimdecode (is quite large)
 
# dmidecode 2.10
SMBIOS 2.6 present.
89 structures occupying 3708 bytes.
Table at 0x0009EC00.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 'V3.01 '
Release Date: 11/12/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.16
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: empty
Product Name: empty
Version: empty
Serial Number: empty
UUID: 03000200-0400-0500-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: Server
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: TYAN
Product Name: S7010
Version: empty
Serial Number: empty
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: empty
Type: Main Server Chassis
Lock: Not Present
Version: empty
Serial Number: empty
Asset Tag: empty
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 0
Type: Central Processor
Family: Xeon
Manufacturer: Intel 
ID: A5 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 26, Stepping 5
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz 
Voltage: Unknown
External Clock: 133 MHz
Max Speed: 2400 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Instruction
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 kB
Maximum Size: 8192 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x0008, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Xeon
Manufacturer: Intel 
ID: A5 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 26, Stepping 5
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz 
Voltage: Unknown
External Clock: 133 MHz
Max Speed: 2400 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0009
L2 Cache Handle: 0x000A
L3 Cache Handle: 0x000B
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Instruction
Associativity: 4-way Set-associative
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 kB
Maximum Size: 8192 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x000C, DMI type 8, 9 bytes

Last edited by pludi; 09-11-2011 at 07:42 PM..
# 5  
Old 09-11-2011
Quote:
I expected 2 cpu's with 8 cpu cores and I have only one !!!
Question: where does this assumption come from? (hardware spec, I guess?).

Thanks,
/Lew
# 6  
Old 09-12-2011
If you look at the Intel WEB
the 5530 has 4 cores and if there are 2 of them there should be 8 cores. Before I installed Linux on this box I had windows installed and there where 8 cores.

If you see Linux find 2 CPU's in the worst case there should be 2 cores but linux find still only one.
# 7  
Old 09-12-2011
Again, what version of red hat are you running?
Login or Register to Ask a Question

Previous Thread | Next Thread

7 More Discussions You Might Find Interesting

1. Solaris

Questions regarding CPU cores vs rctl limit

Hi, I am trying to gather cpu core details and used this script - Solaris & Scripting: Script - Find cpu - model / type / count / core / thread / speed - Solaris Sparc For auuditing purpose, we want to know how many cores are being used by Oracle, because oracle license will be charged on... (2 Replies)
Discussion started by: solaris_1977
2 Replies

2. Red Hat

CPU and Cores information

Hi all. I have a question about linux command to find number of CPU and Core. I usually use the command dmidecode -t processor to find cpu and core numbers . On this machine with Red Hat 4. 0 when I try to insert the command is returned the error -bash: dmidecode: command not found I try to... (8 Replies)
Discussion started by: piccolinomax
8 Replies

3. Solaris

Numbers-of-cpu-cores-in-Solaris-10

Hello All, How do I find the number of CPU's, virtual processors in solaris 10? Thank you Sunil Kumar (2 Replies)
Discussion started by: msgforsunil
2 Replies

4. Solaris

CPU/processor/cores in M4000

Hi Gurus Can someone help me in explaining the below outputs . psrinfo -p 4 /usr/sbin/psrinfo -pv The physical processor has 4 virtual processors (0-3) SPARC64-VI (portid 1024 impl 0x6 ver 0x93 clock 2150 MHz) The physical processor has 4 virtual processors (8-11) SPARC64-VI... (3 Replies)
Discussion started by: ningy
3 Replies

5. UNIX for Dummies Questions & Answers

how to run two unix/linux programs on two different cpu cores

Hi folks, I want to know how to run two unix programs on two different cpu cores on a 2-core or 4-core or 8-core CPU machine? Extending this how would i run four and eight unix programs on 4-core and 8-core machine respectively? If this can be done, how to know which program is assigned to... (1 Reply)
Discussion started by: kaaliakahn
1 Replies

6. Shell Programming and Scripting

Is there a way to make bash [or another shell] use all CPU cores to execute a single script?

I wrote a very simple script that matches combinations of alphabetic characters (1-5). I want to use it to test CPU speeds of different hardware/platforms. The problem is that on multi-core/processor systems, only one CPU is being utilized to execute the script. Is there a way to change that?... (16 Replies)
Discussion started by: ph0enix
16 Replies

7. UNIX for Advanced & Expert Users

Lost one cpu should the box crash

I've got a E6500 with 6 cpu's over 3 cpu boards. we lost one cpu should the box keel over ?? I wouldn't have seen this as a Single Point Of Failure Kie (2 Replies)
Discussion started by: kie
2 Replies
Login or Register to Ask a Question