Thiis is the output of lspci -v command, the PCI card is listed, does that mean there are arleady drivers available for the card?
I am running a 32 bit
[lab@lab /]$ lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at c880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at c400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: leds-ss4200, iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at c080 [size=8]
I/O ports at c000 [size=4]
I/O ports at bc00 [size=8]
I/O ports at b880 [size=4]
I/O ports at b800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
Subsystem: Hewlett-Packard Company Device 2a8c
Flags: medium devsel, IRQ 19
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Hewlett-Packard Company Device 2a8c
Physical Slot: 33
Flags: bus master, fast devsel, latency 0, IRQ 43
I/O ports at d800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Memory at fdff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:04.0 Multiport serial controller: SUNIX Co., Ltd. Device 1999
Subsystem: SUNIX Co., Ltd. Device 0002
Flags: medium devsel, IRQ 20
I/O ports at ec00 [size=32]
I/O ports at e880 [size=16]
Capabilities: <access denied>
[lab@lab /]$ lsmod
Module Size Used by
tcp_lp 1827 0
nls_utf8 1045 1
fuse 53547 3
cpufreq_ondemand 4782 2
acpi_cpufreq 8212 1
mperf 1137 1 acpi_cpufreq
8021q 14154 0
garp 4938 1 8021q
stp 1391 1 garp
llc 3726 2 garp,stp
ip6t_REJECT 3395 2
nf_conntrack_ipv6 6429 1
nf_defrag_ipv6 7174 1 nf_conntrack_ipv6
ip6table_filter 1215 1
ip6_tables 9828 1 ip6table_filter
nf_conntrack_ipv4 6874 1
nf_defrag_ipv4 1093 1 nf_conntrack_ipv4
xt_state 942 2
nf_conntrack 56146 3 nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state
snd_hda_codec_realtek 241866 1
snd_hda_intel 20567 2
snd_hda_codec 71160 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4905 1 snd_hda_codec
snd_seq 43528 0
snd_seq_device 5033 1 snd_seq
snd_pcm 63457 2 snd_hda_intel,snd_hda_codec
snd_timer 15245 2 snd_seq,snd_pcm
iTCO_wdt 10436 0
r8169 32300 0
microcode 11689 0
iTCO_vendor_support 2070 1 iTCO_wdt
snd 48471 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
mii 3639 1 r8169
i2c_i801 8021 0
serio_raw 3394 0
soundcore 5027 1 snd
snd_page_alloc 6035 2 snd_hda_intel,snd_pcm
ipv6 235841 19 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
uas 6207 0
usb_storage 36519 0
i915 332204 3
drm_kms_helper 23178 1 i915
drm 156263 4 i915,drm_kms_helper
i2c_algo_bit 4206 1 i915
i2c_core 21572 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 10684 1 i915
[lab@lab /]$ uname -m
i686
[lab@lab /]$ gcc -v
bash: gcc: command not found...
Install package 'gcc' to provide command 'gcc'? [N/y]
* Running...
* Resolving dependencies...
The following packages have to be installed:
cpp-4.6.0-10.fc15.i686 The C Preprocessor
binutils-2.21.51.0.6-6.fc15.i686 A GNU collection of binary utilities
ppl-0.11.2-1.fc15.i686 The Parma Polyhedra Library: a library of numerical abstractions
glibc-devel-2.14-5.i686 Object files for development using standard C libraries.
cloog-ppl-0.15.9-3.fc15.i686 Parma Polyhedra Library backend (ppl) based version of the Cloog binaries
The following packages have to be updated:
glibc-2.14-5.i686 The GNU libc libraries
The following packages have to be installed:
glibc-headers-2.14-5.i686 Header files for development using standard C libraries.
ppl-pwl-0.11.2-1.fc15.i686 The Parma Watchdog Library: a C++ library for watchdog timers
The following packages have to be updated:
libgomp-4.6.0-10.fc15.i686 GCC OpenMP v3.0 shared support library
glibc-common-2.14-5.i686 Common binaries and locale data for glibc
The following packages have to be installed:
libmpc-0.8.3-0.3.svn855.fc15.i686 C library for multiple precision complex arithmetic
The following packages have to be updated:
libgcc-4.6.0-10.fc15.i686 GCC version 4.6 shared support library
Proceed with changes? [N/y]
* Waiting for authentication...
* Running...
* Resolving dependencies...
* Downloading packages... The transaction failed: package-download-failed, Errors were encountered while downloading packages.
ppl-0.11.2-1.fc15.i686: failure: Packages/ppl-0.11.2-1.fc15.i686.rpm from fedora: [Errno 256] No more mirrors to try.
libgcc-4.6.0-10.fc15.i686: failure: libgcc-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-headers-2.14-5.i686: failure: glibc-headers-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-common-2.14-5.i686: failure: glibc-common-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
libgomp-4.6.0-10.fc15.i686: failure: libgomp-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-devel-2.14-5.i686: failure: glibc-devel-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
cloog-ppl-0.15.9-3.fc15.i686: failure: Packages/cloog-ppl-0.15.9-3.fc15.i686.rpm from fedora: [Errno 256] No more mirrors to try.
gcc-4.6.0-10.fc15.i686: failure: gcc-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
libmpc-0.8.3-0.3.svn855.fc15.i686: fai...
[lab@lab /]$ gcc -v
bash: gcc: command not found...
Install package 'gcc' to provide command 'gcc'? [N/y]
* Running...
* Resolving dependencies...
The following packages have to be installed:
cpp-4.6.0-10.fc15.i686 The C Preprocessor
binutils-2.21.51.0.6-6.fc15.i686 A GNU collection of binary utilities
ppl-0.11.2-1.fc15.i686 The Parma Polyhedra Library: a library of numerical abstractions
glibc-devel-2.14-5.i686 Object files for development using standard C libraries.
cloog-ppl-0.15.9-3.fc15.i686 Parma Polyhedra Library backend (ppl) based version of the Cloog binaries
The following packages have to be updated:
glibc-2.14-5.i686 The GNU libc libraries
The following packages have to be installed:
glibc-headers-2.14-5.i686 Header files for development using standard C libraries.
ppl-pwl-0.11.2-1.fc15.i686 The Parma Watchdog Library: a C++ library for watchdog timers
The following packages have to be updated:
libgomp-4.6.0-10.fc15.i686 GCC OpenMP v3.0 shared support library
glibc-common-2.14-5.i686 Common binaries and locale data for glibc
The following packages have to be installed:
libmpc-0.8.3-0.3.svn855.fc15.i686 C library for multiple precision complex arithmetic
The following packages have to be updated:
libgcc-4.6.0-10.fc15.i686 GCC version 4.6 shared support library
Proceed with changes? [N/y]
* Waiting for authentication...
* Waiting in queue...
* Running...
* Resolving dependencies...
* Downloading packages... The transaction failed: package-download-failed, Errors were encountered while downloading packages.
ppl-0.11.2-1.fc15.i686: failure: Packages/ppl-0.11.2-1.fc15.i686.rpm from fedora: [Errno 256] No more mirrors to try.
libgcc-4.6.0-10.fc15.i686: failure: libgcc-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-headers-2.14-5.i686: failure: glibc-headers-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-common-2.14-5.i686: failure: glibc-common-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
libgomp-4.6.0-10.fc15.i686: failure: libgomp-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
glibc-devel-2.14-5.i686: failure: glibc-devel-2.14-5.i686.rpm from updates: [Errno 256] No more mirrors to try.
cloog-ppl-0.15.9-3.fc15.i686: failure: Packages/cloog-ppl-0.15.9-3.fc15.i686.rpm from fedora: [Errno 256] No more mirrors to try.
gcc-4.6.0-10.fc15.i686: failure: gcc-4.6.0-10.fc15.i686.rpm from updates: [Errno 256] No more mirrors to try.
libmpc-0.8.3-0.3.svn855.fc15.i686: fai...
Last edited by ndaka123488; 09-08-2011 at 11:03 AM..