serial port reading

9 More Discussions You Might Find Interesting

1. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

2. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

3. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

6. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than...

7. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

8. SCO

Serial port configuration

Hi I have just re-installed Compaq ML350 G2 Server with Unix SCO 5.0.5 and informix DBMS . on this server we have 2 serial ports , unfortunately its not working. Can anyone help me to check the serial ports working or not OR guide me to reconfigure it. I have attached a device with...

9. UNIX for Advanced & Expert Users

Communicating with Serial Port

I am using system running on red hat linux 4. I had connected health measuring machine to the serial port and configured it stty -F /dev/ttyS0 9600 -parenb cs8 -cstopb this machine requires a command to be passed to it for giving output. I am unable to pass command hexa format(0x68) to the...

LEARN ABOUT NETBSD

boca

BOCA(4) 						   BSD Kernel Interfaces Manual 						   BOCA(4)

NAME

     boca -- multiplexing serial communications interface

SYNOPSIS

     For 4-port BB1004 boards:

     boca0 at isa? port 0x100 irq 5
     com2 at boca? slave ?
     com3 at boca? slave ?
     com4 at boca? slave ?
     com5 at boca? slave ?

     For 8-port BB1008 boards:

     boca0 at isa? port 0x100 irq 5
     com2 at boca? slave ?
     com3 at boca? slave ?
     com4 at boca? slave ?
     com5 at boca? slave ?
     com6 at boca? slave ?
     com7 at boca? slave ?
     com8 at boca? slave ?
     com9 at boca? slave ?

     For 16-port BB2016 boards:

     boca0 at isa? port 0x100 irq 5
     com2 at boca? slave ?
     com3 at boca? slave ?
     com4 at boca? slave ?
     com5 at boca? slave ?
     com6 at boca? slave ?
     com7 at boca? slave ?
     com8 at boca? slave ?
     com9 at boca? slave ?
     boca1 at isa? port 0x140 irq 5
     com10 at boca? slave ?
     com11 at boca? slave ?
     com12 at boca? slave ?
     com13 at boca? slave ?
     com14 at boca? slave ?
     com15 at boca? slave ?
     com16 at boca? slave ?
     com17 at boca? slave ?

     (The BB2016 is functionally equivalent to two BB1008 boards, and is configured as such.)

DESCRIPTION

     The boca driver provides support for BOCA Research BB1004, BB1008 and BB2016 boards that multiplex together up to four, eight or sixteen EIA
     RS-232C (CCITT V.28) communications interfaces.

     Each boca device is the master device for up to eight com devices.  The kernel configuration specifies these com devices as slave devices of
     the boca device, as shown in the synopsis.  The slave ID given for each com device determines which bit in the interrupt multiplexing regis-
     ter is tested to find interrupts for that device.	The port specification for the boca device is used to compute the base addresses for the
     com subdevices and the port for the interrupt multiplexing register.

FILES

     /dev/tty??

SEE ALSO

     com(4)

HISTORY

     The boca driver was written by Charles Hannum, based on the ast driver and source code from David Muir Sharnoff.  David wishes to acknowledge
     the assistance of Jason Venner in determining how to use the BOCA boards.

BSD
								  January 3, 1995							       BSD

Programming