Search Results

Hello,

I am not able to figure out if the disk is in mirror or not (hardware RAID). c1t1d0s0 is the one, which I need to replace, as this one is in the failing state.
solaris-10-priv#df -h...

I found the issue, it was tricky.

Multicast packets are going through admin interface because it is managed by /lib/svc/method/net-svc configuration. One of its parameter says
if [...

This server is on SVM, so that possibility is not an option.
truss output is long, so also attaching that in txt attachment here.

# truss -rall -wall chown root:sys /etc/shadow...

I am sorry to have confused you. I clubbed two issues in one. I will re-word this issue.

IPMP is already configured on this server. Suddenly I got alert that IPMP group is failed over due to some...

================
Update : I am able to fix it. That was patch issue. I patched this server couple of days back and kernel patch was mismatching in both command
#uname -a
# strings...

Hi,

I have T5220 sparc server and I want to install Solaris 11.3 on that. From notes, I know that 11.4 will not be supported.
It is old server, which had hardware RAID (with SAS card). I removed...

Hello,

On Solaris 10, here are entries for logs in httpd.conf
ErrorLog "|/export/apache/apache-2.2.17/bin/rotatelogs -l -f /var/log/apache/error_log.%Y%m%d 86400"
It keeps creating daily logs...

Yes, that can help. How can I pass that name to cronjob ?

Alternatively I thought of passing same syntax as mentioned in logrotate, but that fails
bash-3.2# ls -l /var/log/apache/error_log.%Y%m%d...

This worked well. Thanks much

Hi,

In my /etc/ldap.conf , I have below entry
uri ldaps://pbs-mast.prd.prp.ia/ ldaps://dbs-mast.prd.prp.ia/
I want to replace it with -
uri ldaps://dbs-mast.prd.prp.ia/
I tried with awk, but...

Yes, you are right.
There was debug line in /etc/ldap.conf . After removing that, it was okay. Thanks for pointing it.

I powered off server and started again and then it worked. Thanks for correcting and pointing to correct path
boot /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3/disk - text this worked for...

I tried to make its shell as /usr/libexec/openssh/sftp-server and this worked

Manali, was there any reason to break mirror before rebooting server ? I believe, you are not going to change anything.

You detached c0t4d0s0 and attached also same device. So as far as it is pointing to same device, things should be alright. No need to worry

It is entirely depend on you and your applications criticality and compatibility, if you want to have new kernel every time. In my environment, it is not so much required. If you can afford little...