8 More Discussions You Might Find Interesting
How can i remove LUN's from solaris 10 those are unmapped from SAN?
from storage side i got confirmation that they removed lun. but in my solaris box still it's visible.
i tried below.
firstname.lastname@example.org #luxadm -e offline /dev/rdsk/c2t600D02310007D16C42FF09E24B5B8255d0s2... (7 Replies)
Discussion started by: bentech4u
I have created a lun on Storage and connected it to server using fiber channel.
LUN is presented on new Server .
How do i check and mount this newly created LUN? (1 Reply)
Discussion started by: pinga123
Hello to all,
Actually, currently on my Solaris box, I've a LUN (5TB space) from a EMC storage which is working fine, and a partition with ZFS filesystem is created for that LUN. as further you'll see in the logs, the "c4t6006016053802E00E6A9196B6506E211d0s2" is the current configured LUN in the... (4 Replies)
Discussion started by: Anti_Evil
4. Red Hat
Is there command to detect the newly added LUN is linux box. I tried with below commands, but that doesn't work out.
fdisk -l | grep Disk
pvscan (5 Replies)
Discussion started by: gsiva
Really hoping someone can help. We have an AIX server connected to a Quantum SDLC sitting in front of an S10K library. The library has 3 logical partitions (two LTO4, one LTO3), so it requires 3 distinct medium changers. The SDLC presents the 3 luns (which are the medium... (1 Reply)
Discussion started by: jwholey
how can I check if I have LUNs in a server and the LUNīs vpath in AiX?
thx (5 Replies)
Discussion started by: jcpetela
Hi, I am a newbi to linux,
i wana to write a program in C that can detect arrival of a usb flash memory. I want also to find the actual mount point of new inserted flash disk. can anyone help me?
thanks a lot (6 Replies)
Discussion started by: aghashahi
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Discussion started by: Remi
LIEBERT(8) NUT Manual LIEBERT(8)
liebert - Driver for Liebert contact-closure UPS equipment
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
This driver does not support any extra settings in the ups.conf(5).
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
The core driver:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)