Note: This article applies to Mac OS X 10.2 or later and Mac OS X Server 10.2 and later. Occasionally, Disk Utility may report that a software mirror has become degraded and that it must be rebuilt. In such a situation, one drive has become out of sync with another. To rebuild the software mirror, follow these steps below. Warning: Before proceeding, you must back up of all data, because failure to follow the steps correctly may result in data loss.
Hello,
I am trying to convert a single-drive Centos 7.2 installation with LVM into a two-disk mdadm mirror with mrrored LVM. I was able to follow the excellent instructions at:
http://www.dgoradia.com/creating-a-raid1-mirrored-on-an-existing-centos-on-lvm/and did create a two-disk mirror... (1 Reply)
SCO UNIX 5.0.7, IBM x-series 235 w/ LSI controller. I can't for the life of me find any documentation for an OS level application, or an entry in scoadmin to rebuild the array or even find logs within the OS.
Is my only option to rebuild the array from the BIOS tool before boot up? (2 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hi,
I have an Ubuntu system which I have an faulted mirror.
I trying to replace the disk, but I'm stuck on that it boots and only showing GRUB
GRUB
## ## End Default Options ##
title Ubuntu 8.04.4 LTS, kernel 2.6.24-26-server
root (hd0,0)
kernel ... (0 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
Hi there,
I'm not sure if this is possible, but here is what I'd like to do..
I have an existing 160GB drive in my Redhat 9.0 server that I would like to add an additional 160GB drive to and create a mirrored RAID of the first disk to the new disk. I would like to do this without having to... (2 Replies)
PERLMACOS(1) Perl Programmers Reference Guide PERLMACOS(1)NAME
README.macos - Perl under Mac OS (Classic)
SYNOPSIS
This document briefly describes perl under Mac OS (Classic). If you are running perl under Mac OS X, you don't want to be here (unless you
are in the Classic environment under Mac OS X).
When we say "Mac OS" below, we mean Mac OS 7, 8, and 9, and not Mac OS X.
DESCRIPTION
The latest perl source itself builds on Mac OS, with some additional pieces. Support for Mac OS is now in the perl core, and MacPerl is
kept in close sync with regular perl releases.
To build perl for Mac OS (as an MPW tool), you will need the addition of the macos subdirectory, distributed separately. It includes extra
source files, config files, and make files. It also includes extra Mac-specific modules.
To build the MacPerl application, you will also need the macperl directory, which includes the source files for creating the application
itself.
All of this is available from the development site, via HTTP (in the MacPerl Installer, which includes all the source and binaries) and
anonymous CVS.
http://dev.macperl.org/
The source is also in the main perl repository in the macperl branch (the 5.6 source is in the maint-5.6/macperl branch).
You will also need compilers and libraries, all of them freely available. These are linked to from the SourceForge site. Go that site for
all things having to do with MacPerl development.
MacPerl 5.6.1 and later are supported on Mac OS 8.1 and later, for 68040 and PowerPC architectures. The MPW tool may be used on Mac OS
7.5.5 and 68030 computers.
MacPerl 5.2.0r4 is also available, on the CPAN and on SourceForge. It is based on perl 5.004, and works with Mac OS 7.5.5 and 68030 com-
puters.
AUTHOR
perl was ported to Mac OS by Matthias Neeracher <neeracher@mac.com>. It is currently maintained by Chris Nandor <pudge@pobox.com>.
DATE
Last modified 2002.05.02.
perl v5.8.9 2007-11-17 PERLMACOS(1)
