Naviscore NMS for Lucent Switch Problem

 
Thread Tools Search this Thread
Special Forums News, Links, Events and Announcements Naviscore NMS for Lucent Switch Problem
# 1  
Old 08-20-2009
Naviscore NMS for Lucent Switch Problem

We have a network of Lucent BSTDX9000 switches for fiber and wireless links in the United States and Costa Rica. I was dragging a BSTDX9000 icon in my Naviscore NMS and it disappeared.
All of my trunks are still up but I can't figure out how to get the icon back. I'm screwed if something happens in that switch and I can't get into it.
If you or somebody you know can help, it would be greatly appreciated
I'm willing to pay whatever it takes and we can set someone up to remotely log in.
You can also contact me on my cell. 602-370-9750

Thanks, Scott
Login or Register to Ask a Question

Previous Thread | Next Thread

7 More Discussions You Might Find Interesting

1. SuSE

SLES 11 Switch user problem

Hi, I am using SUSE Linux Enterprise Server 11 (x86_64), PATCHLEVEL = 0 as NIS server. All client is having SUSE Linux Enterprise Desktop 11 (x86_64), PATCHLEVEL = 0. All system are configured to work in GUI. When NIS user say 'a' locks system, and user 'b' wants to login to the same system... (1 Reply)
Discussion started by: sachingujrathi
1 Replies

2. Shell Programming and Scripting

how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable

hi, how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable which needs to be connected to one console server having rj11 on its side and db 9 female on other end.i.e. on switch side,console cable has rj45 and db 9 pin female connector on other side of... (1 Reply)
Discussion started by: pankajd
1 Replies

3. Shell Programming and Scripting

need help for cp with -p switch

Guys, I need to copy files from source to destination with datetime preserved I did it with cp -p <source>/file <destinaltion>/file But when I do stat command on copied file , it seems the copied file has "change time" modified. Please guide me in understanding (2 Replies)
Discussion started by: mohan_xunil
2 Replies

4. Solaris

Naviscore NMS Problem...Need Help, Will Pay good

We have a network of Lucent BSTDX9000 switches for fiber and wireless links in the United States and Costa Rica. I was dragging a BSTDX9000 switch icon in my Naviscore NMS and it disappeared. All of my trunks and circuits are still fuctioning properly but I can't figure out how to get the icon... (3 Replies)
Discussion started by: phxteleport
3 Replies

5. IP Networking

Open Source NMS

Hello there, I wanted to know the members' opinion about the best open source network management software which uses a web browser to show its interface and results. I am interested in the software for both windows and Linux OSs. Thanks. (4 Replies)
Discussion started by: Jawwad
4 Replies

6. UNIX for Advanced & Expert Users

Lucent/Orinoco Wireless card problems

Im running mandrake 9.0 and i just got a Lucent/orinoco PC24E-H-FC. I beleive it was originaly made by lucent but then made by Orinoco.. But anyways i just cant get connected. Ive tried 3 differemt drivers. My wireless access point router is a Linksys. I just cant figure this out ive talked on... (3 Replies)
Discussion started by: jason1234
3 Replies

7. Shell Programming and Scripting

can you switch

hi, i am try to run following script in c-shell, using switch command. #!/bin/csh choice=0 while do echo "system monitor" echo " 1) system paging 2) system file inf. 3) system disk inf. 9) exit " echo "select an option: \c" read choice case $choice in 1)... (3 Replies)
Discussion started by: neer45
3 Replies
Login or Register to Ask a Question
WAVELAN(4)						     Linux Programmer's Manual							WAVELAN(4)

NAME
wavelan - AT&T GIS WaveLAN ISA device driver SYNOPSIS
insmod wavelan_cs.o [io=B,B..] [ irq=I,I..] [name=N,N..] DESCRIPTION
wavelan is the low-level device driver for the NCR / AT&T / Lucent WaveLAN ISA and Digital (DEC) RoamAbout DS wireless ethernet adapter. This driver is available as a module or might be compiled in the kernel. This driver supports multiple cards in both forms (up to 4) and allocates the next available ethernet device (eth0..eth#) for each card found, unless a device name is explicitly specified (see below). This device name will be reported in the kernel log file with the MAC address, NWID and frequency used by the card. Parameters This section apply to the module form (parameters passed on the insmod(8) command line). If the driver is included in the kernel, use the ether=IRQ,IO,NAME syntax on the kernel command line. io Specify the list of base address where to search for wavelan cards (setting by dip switch on the card). If you don't specify any io address, the driver will scan 0x390 and 0x3E0 addresses, which might conflict with other hardware... irq Set the list of irq that each wavelan card should use (the value is saved in permanent storage for future use). name Set the list of name to be used for each wavelan cards device (name used by ifconfig(8)). Wireless Extensions Use iwconfig(8) to manipulate wireless extensions. NWID (or domain) Set the network ID [0 to FFFF] or disable it [off]. As the NWID is stored in the card Permanent Storage Area, it will be reuse at any fur- ther invocation of the driver. Frequency & channels For the 2.4GHz 2.00 Hardware, you are able to set the frequency by specifying one of the 10 defined channels (2.412, 2.422, 2.425, 2.4305, 2.432, 2.442, 2.452, 2.460, 2.462 or 2.484) or directly by its value. The frequency is changed immediately and permanently. Frequency availability depends on the regulations... Statistics spy Set a list of MAC addresses in the driver (up to 8) and get the last quality of link for each of those (see iwspy(8)). /proc/net/wireless status is the status reported by the modem. Link quality reports the quality of the modulation on the air (direct sequence spread spec- trum) [max = 16]. Level and Noise refer to the signal level and noise level [max = 64]. The crypt discarded packet and misc discarded packet counters are not implemented. Private Ioctl You may use iwpriv(8) to manipulate private ioctls. Quality and Level threshold Enable you the define the quality and level threshold used by the modem (packet below that level are discarded). Histogram This functionality makes it possible to set a number of signal level intervals and to count the number of packets received in each of those defined intervals. This distribution might be used to calculate the mean value and standard deviation of the signal level. Specific Notes This driver will fail to detect some non-NCR/ATT&T/Lucent Wavelan cards. If this happens for you, you must look in the source code on how to add your card to the detection routine. Some of the mentioned features are optional. You may enable to disable them by changing flags in the driver header and recompile. SEE ALSO
wavelan_cs(4), ifconfig(8), insmod(8), iwconfig(8), iwpriv(8), iwspy(8) COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 1996-10-22 WAVELAN(4)