Query: perlrebackslash
OS: x11r4
Section: 1
Format: Original Unix Latex Style Formatted with HTML and a Horizontal Scroll Bar
PERLREBACKSLASH(1) Perl Programmers Reference Guide PERLREBACKSLASH(1)NAMEperlrebackslash - Perl Regular Expression Backslash Sequences and EscapesDESCRIPTIONThe top level documentation about Perl regular expressions is found in perlre. This document describes all backslash and escape sequences. After explaining the role of the backslash, it lists all the sequences that have a special meaning in Perl regular expressions (in alphabetical order), then describes each of them. Most sequences are described in detail in different documents; the primary purpose of this document is to have a quick reference guide describing all backslash and escape sequences. The backslash In a regular expression, the backslash can perform one of two tasks: it either takes away the special meaning of the character following it (for instance, "|" matches a vertical bar, it's not an alternation), or it is the start of a backslash or escape sequence. The rules determining what it is are quite simple: if the character following the backslash is a punctuation (non-word) character (that is, anything that is not a letter, digit or underscore), then the backslash just takes away the special meaning (if any) of the character fol- lowing it. If the character following the backslash is a letter or a digit, then the sequence may be special; if so, it's listed below. A few letters have not been used yet, and escaping them with a backslash is safe for now, but a future version of Perl may assign a special meaning to it. However, if you have warnings turned on, Perl will issue a warning if you use such a sequence. [1]. It is however guaranteed that backslash or escape sequences never have a punctuation character following the backslash, not now, and not in a future version of Perl 5. So it is safe to put a backslash in front of a non-word character. Note that the backslash itself is special; if you want to match a backslash, you have to escape the backslash with a backslash: "/\/" matches a single backslash. [1] There is one exception. If you use an alphanumerical character as the delimiter of your pattern (which you probably shouldn't do for readability reasons), you will have to escape the delimiter if you want to match it. Perl won't warn then. See also "Gory details of parsing quoted constructs" in perlop. All the sequences and escapes 00 Octal escape sequence. 1 Absolute backreference. a Alarm or bell. A Beginning of string. Word/non-word boundary. (Backspace in a char class). B Not a word/non-word boundary. cX Control-X (X can be any ASCII character). C Single octet, even under UTF-8. d Character class for digits. D Character class for non-digits. e Escape character. E Turn off Q, L and U processing. f Form feed. G Pos assertion. l Lowercase next character. L Lowercase till E. (Logical) newline character. N{} Named (Unicode) character. p{}, pP Character with a Unicode property. P{}, PP Character without a Unicode property. Q Quotemeta till E. Return character. s Character class for white space. S Character class for non white space. Tab character. u Titlecase next character. U Uppercase till E. w Character class for word characters. W Character class for non-word characters. x{}, x00 Hexadecimal escape sequence. X Extended Unicode "combining character sequence". z End of string. End of string. Character Escapes Fixed characters A handful of characters have a dedicated character escape. The following table shows them, along with their code points (in decimal and hex), their ASCII name, the control escape (see below) and a short description. Seq. Code Point ASCII Cntr Description. Dec Hex a 7 07 BEL cG alarm or bell 8 08 BS cH backspace [1] e 27 1B ESC c[ escape character f 12 0C FF cL form feed 10 0A LF cJ line feed [2] 13 0D CR cM carriage return 9 09 TAB cI tab [1] "" is only the backspace character inside a character class. Outside a character class, "" is a word/non-word boundary. [2] " " matches a logical newline. Perl will convert between " " and your OSses native newline character when reading from or writing to text files. Example $str =~ / /; # Matches if $str contains a (horizontal) tab. Control characters "c" is used to denote a control character; the character following "c" is the name of the control character. For instance, "/cM/" matches the character control-M (a carriage return, code point 13). The case of the character following "c" doesn't matter: "cM" and "cm" match the same character. Mnemonic: control character. Example $str =~ /cK/; # Matches if $str contains a vertical tab (control-K). Named characters All Unicode characters have a Unicode name, and characters in various scripts have names as well. It is even possible to give your own names to characters. You can use a character by name by using the "N{}" construct; the name of the character goes between the curly braces. You do have to "use charnames" to load the names of the characters, otherwise Perl will complain you use a name it doesn't know about. For more details, see charnames. Mnemonic: Named character. Example use charnames ':full'; # Loads the Unicode names. $str =~ /N{THAI CHARACTER SO SO}/; # Matches the Thai SO SO character use charnames 'Cyrillic'; # Loads Cyrillic names. $str =~ /N{ZHE}N{KA}/; # Match "ZHE" followed by "KA". Octal escapes Octal escapes consist of a backslash followed by two or three octal digits matching the code point of the character you want to use. This allows for 512 characters (" 0" up to "777") that can be expressed this way. Enough in pre-Unicode days, but most Unicode characters cannot be escaped this way. Note that a character that is expressed as an octal escape is considered as a character without special meaning by the regex engine, and will match "as is". Examples $str = "Perl"; $str =~ /120/; # Match, "120" is "P". $str =~ /120+/; # Match, "120" is "P", it is repeated at least once. $str =~ /P 53/; # No match, " 53" is "+" and taken literally. Caveat Octal escapes potentially clash with backreferences. They both consist of a backslash followed by numbers. So Perl has to use heuristics to determine whether it is a backreference or an octal escape. Perl uses the following rules: 1 If the backslash is followed by a single digit, it's a backreference. 2 If the first digit following the backslash is a 0, it's an octal escape. 3 If the number following the backslash is N (decimal), and Perl already has seen N capture groups, Perl will consider this to be a back- reference. Otherwise, it will consider it to be an octal escape. Note that if N > 999, Perl only takes the first three digits for the octal escape; the rest is matched as is. my $pat = "(" x 999; $pat .= "a"; $pat .= ")" x 999; /^($pat)1000$/; # Matches 'aa'; there are 1000 capture groups. /^$pat1000$/; # Matches 'a@0'; there are 999 capture groups # and 1000 is seen as 100 (a '@') and a '0'. Hexadecimal escapes Hexadecimal escapes start with "x" and are then either followed by two digit hexadecimal number, or a hexadecimal number of arbitrary length surrounded by curly braces. The hexadecimal number is the code point of the character you want to express. Note that a character that is expressed as a hexadecimal escape is considered as a character without special meaning by the regex engine, and will match "as is". Mnemonic: hexadecimal. Examples $str = "Perl"; $str =~ /x50/; # Match, "x50" is "P". $str =~ /x50+/; # Match, "x50" is "P", it is repeated at least once. $str =~ /Px2B/; # No match, "x2B" is "+" and taken literally. /x{2603}x{2602}/ # Snowman with an umbrella. # The Unicode character 2603 is a snowman, # the Unicode character 2602 is an umbrella. /x{263B}/ # Black smiling face. /x{263b}/ # Same, the hex digits A - F are case insensitive. Modifiers A number of backslash sequences have to do with changing the character, or characters following them. "l" will lowercase the character following it, while "u" will uppercase (or, more accurately, titlecase) the character following it. (They perform similar functionality as the functions "lcfirst" and "ucfirst"). To uppercase or lowercase several characters, one might want to use "L" or "U", which will lowercase/uppercase all characters following them, until either the end of the pattern, or the next occurrence of "E", whatever comes first. They perform similar functionality as the functions "lc" and "uc" do. "Q" is used to escape all characters following, up to the next "E" or the end of the pattern. "Q" adds a backslash to any character that isn't a letter, digit or underscore. This will ensure that any character between "Q" and "E" is matched literally, and will not be inter- preted by the regexp engine. Mnemonic: Lowercase, Uppercase, Quotemeta, End. Examples $sid = "sid"; $greg = "GrEg"; $miranda = "(Miranda)"; $str =~ /u$sid/; # Matches 'Sid' $str =~ /L$greg/; # Matches 'greg' $str =~ /Q$mirandaE/; # Matches '(Miranda)', as if the pattern # had been written as /(Miranda)/ Character classes Perl regular expressions have a large range of character classes. Some of the character classes are written as a backslash sequence. We will briefly discuss those here; full details of character classes can be found in perlrecharclass. "w" is a character class that matches any word character (letters, digits, underscore). "d" is a character class that matches any digit, while the character class "s" matches any white space character. The uppercase variants ("W", "D", "S") are character classes that match any character that isn't a word character, digit or white space. Mnemonics: word, digit, space Unicode classes "pP" (where "P" is a single letter) and "p{Property}" are used to match a character that matches the given Unicode property; properties include things like "letter", or "thai character". Capitalizing the sequence to "PP" and "P{Property}" make the sequence match a charac- ter that doesn't match the given Unicode property. For more details, see "Backslashed sequences" in perlrecharclass and "Unicode Character Properties" in perlunicode. Mnemonic: property. Referencing If capturing parenthesis are used in a regular expression, we can refer to the part of the source string that was matched, and match exactly the same thing. In Perl 5.8.x and earlier there is only one way of referring to a backreference, by absolution number. Perl 5.10 adds the ability to reference relatively and by name. Absolute referencing A backslash sequence that starts with a backslash and is followed by a number is an absolute reference (but be aware of the caveat men- tioned above). If the number is N, it refers to the Nth set of parenthesis - whatever has been matched by that set of parenthesis has to be matched by the "N" as well. Examples /(w+) 1/; # Finds a duplicated word, (e.g. "cat cat"). /(.)(.)21/; # Match a four letter palindrome (e.g. "ABBA"). Assertions Assertions are conditions that have to be true -- they don't actually match parts of the substring. There are six assertions that are writ- ten as backslash sequences. A "A" only matches at the beginning of the string. If the "/m" modifier isn't used, then "/A/" is equivalent with "/^/". However, if the "/m" modifier is used, then "/^/" matches internal newlines, but the meaning of "/A/" isn't changed by the "/m" modifier. "A" matches at the beginning of the string regardless whether the "/m" modifier is used. z, "z" and "" match at the end of the string. If the "/m" modifier isn't used, then "//" is equivalent with "/$/", that is, it matches at the end of the string, or before the newline at the end of the string. If the "/m" modifier is used, then "/$/" matches at internal newlines, but the meaning of "//" isn't changed by the "/m" modifier. "" matches at the end of the string (or just before a trailing newline) regardless whether the "/m" modifier is used. "z" is just like "", except that it will not match before a trailing newline. "z" will only match at the end of the string - regardless of the modifiers used, and not before a newline. G "G" is usually only used in combination with the "/g" modifier. If the "/g" modifier is used (and the match is done in scalar con- text), Perl will remember where in the source string the last match ended, and the next time, it will start the match from where it ended the previous time. "G" matches the point where the previous match ended, or the beginning of the string if there was no previous match. Mnemonic: Global. , B "" matches at any place between a word and a non-word character; "B" matches at any place between characters where "" doesn't match. "" and "B" assume there's a non-word character before the beginning and after the end of the source string; so "" will match at the beginning (or end) of the source string if the source string begins (or ends) with a word character. Otherwise, "B" will match. Mnemonic: boundary. Examples "cat" =~ /Acat/; # Match. "cat" =~ /cat/; # Match. "cat " =~ /cat/; # Match. "cat " =~ /catz/; # No match. "cat" =~ /cat/; # Matches. "cats" =~ /cat/; # No match. "cat" =~ /catB/; # No match. "cats" =~ /catB/; # Match. while ("cat dog" =~ /(w+)/g) { print $1; # Prints 'catdog' } while ("cat dog" =~ /G(w+)/g) { print $1; # Prints 'cat' } Misc Here we document the backslash sequences that don't fall in one of the categories above. They are: C "C" always matches a single octet, even if the source string is encoded in UTF-8 format, and the character to be matched is a multi- octet character. "C" was introduced in perl 5.6. Mnemonic: oCtet. X This matches an extended Unicode combining character sequence, and is equivalent to "(?>PMpM*)". "PM" matches any character that is not considered a Unicode mark character, while "pM" matches any character that is considered a Unicode mark character; so "X" matches any non mark character followed by zero or more mark characters. Mark characters include (but are not restricted to) combining charac- ters and vowel signs. "X" matches quite well what normal (non-Unicode-programmer) usage would consider a single character: for example a base character (the "PM" above), for example a letter, followed by zero or more diacritics, which are combining characters (the "pM*" above). Mnemonic: eXtended Unicode character. Examples "x{256}" =~ /^CC$/; # Match as chr (256) takes 2 octets in UTF-8. $str =~ s/fooKbar/baz/g; # Change any 'bar' following a 'foo' to 'baz'. $str =~ s/(.)K1//g; # Delete duplicated characters. " " =~ /^R$/; # Match, is a generic newline. " " =~ /^R$/; # Match, is a generic newline. " " =~ /^R$/; # Match, is a generic newline. "Px{0307}" =~ /^X$/ # X matches a P with a dot above. perl v5.8.9 2007-11-17 PERLREBACKSLASH(1)