suse man page for struct_regulator_ops

STRUCT 
REGULATOR_OPS(9) 					   API reference					   STRUCT REGULATOR_OPS(9)

NAME
       struct_regulator_ops - regulator operations.

SYNOPSIS
       struct regulator_ops {
	 int (* list_voltage) (struct regulator_dev *, unsigned selector);
	 int (* set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
	 int (* get_voltage) (struct regulator_dev *);
	 int (* set_current_limit) (struct regulator_dev *,int min_uA, int max_uA);
	 int (* get_current_limit) (struct regulator_dev *);
	 int (* enable) (struct regulator_dev *);
	 int (* disable) (struct regulator_dev *);
	 int (* is_enabled) (struct regulator_dev *);
	 int (* set_mode) (struct regulator_dev *, unsigned int mode);
	 unsigned int (* get_mode) (struct regulator_dev *);
	 int (* enable_time) (struct regulator_dev *);
	 int (* get_status) (struct regulator_dev *);
	 unsigned int (* get_optimum_mode) (struct regulator_dev *, int input_uV,int output_uV, int load_uA);
	 int (* set_suspend_voltage) (struct regulator_dev *, int uV);
	 int (* set_suspend_enable) (struct regulator_dev *);
	 int (* set_suspend_disable) (struct regulator_dev *);
	 int (* set_suspend_mode) (struct regulator_dev *, unsigned int mode);
       };

MEMBERS
       list_voltage
	   Return one of the supported voltages, in microvolts; zero if the selector indicates a voltage that is unusable on this system; or
	   negative errno. Selectors range from zero to one less than regulator_desc.n_voltages. Voltages may be reported in any order.

       set_voltage
	   Set the voltage for the regulator within the range specified. The driver should select the voltage closest to min_uV.

       get_voltage
	   Return the currently configured voltage for the regulator.

       set_current_limit
	   Configure a limit for a current-limited regulator.

       get_current_limit
	   Get the configured limit for a current-limited regulator.

       enable
	   Configure the regulator as enabled.

       disable
	   Configure the regulator as disabled.

       is_enabled
	   Return 1 if the regulator is enabled, 0 if not. May also return negative errno.

       set_mode
	   Set the configured operating mode for the regulator.

       get_mode
	   Get the configured operating mode for the regulator.

       enable_time
	   Time taken for the regulator voltage output voltage to stabalise after being enabled, in microseconds.

       get_status
	   Return actual (not as-configured) status of regulator, as a REGULATOR_STATUS value (or negative errno)

       get_optimum_mode
	   Get the most efficient operating mode for the regulator when running with the specified parameters.

       set_suspend_voltage
	   Set the voltage for the regulator when the system is suspended.

       set_suspend_enable
	   Mark the regulator as enabled when the system is suspended.

       set_suspend_disable
	   Mark the regulator as disabled when the system is suspended.

       set_suspend_mode
	   Set the operating mode for the regulator when the system is suspended.

DESCRIPTION
       This struct describes regulator operations which can be implemented by regulator chip drivers.

AUTHORS
       Liam Girdwood <lrg@slimlogic.co.uk>
	   Author.

       Mark Brown <broonie@opensource.wolfsonmicro.com>
       Wolfson Microelectronics,

	   Author.

COPYRIGHT
Kernel Hackers Manual 2.6.					     July 2010						   STRUCT REGULATOR_OPS(9)