sunos man page for chs

chs(7D) 							      Devices								   chs(7D)

NAME
       chs - IBM ServeRAID PCI host adapter driver

DESCRIPTION
       The chs driver is the IBM ServeRAID PCI controller driver.

PRECONFIGURATION
   Known Problems and Limitations
       To  prevent  data  loss,  a  SCSI disk drive that is not defined as part of any physical pack within a logical drive will not be accessible
       through the Solaris operating environment.

CONFIGURATION
       Auto-configuration code determines whether the adapter is present at the configured address and what types of devices are attached  to  it.
       The IBM ServeRAID is primarily used as a disk array (system drive) controller.

       To  configure the attached disk arrays, you must configure the controller (using the configuration utilities provided by the hardware manu-
       facturer) before booting the Solaris operating environment You use the configuration utilities to set RAID levels, stripe parameters, cache
       mechanisms and perform other functions. For more information, see the user manual supplied with your hardware.

FILES
       /kernel/drv/chs.conf	       chs configuration file

       /dev/dsk/cndn[s|p]n	       block device

       /dev/rdsk/cndn[s|p]n	       raw device where:

       cn			       controller n

       dn			       LUN n (0-7)

       sn			       UNIX system slice n (0-15)

       pn			       fdisk(1M) partition(0)

ATTRIBUTES
       See attributes(5) for a description of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       |Architecture		     |x86			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       fdisk(1M), attributes(5), cmdk(7D)

SunOS 5.10							 27 November 2000							   chs(7D)