redhat man page for lsdev

LSDEV(8)							Linux System Manual							  LSDEV(8)

NAME
       lsdev - display information about installed hardware

SYNOPSIS
       lsdev

DESCRIPTION
       lsdev  gathers information about your computer's installed hardware from the interrupts, ioports and dma files in the /proc directory, thus
       giving you a quick overview of which hardware uses what I/O addresses and what IRQ and DMA channels.

OPTIONS
       None.

FILES
       /proc/interrupts
	      IRQ channels.

       /proc/ioports
	      I/O memory addresses.

       /proc/dma
	      DMA channels.

BUGS
       lsdev can't always figure out which lines in the three examined files refer to one and the same device, because these files  sometimes  use
       different  names  for the same piece of hardware. For example, in some kernels the keyboard is referred to as `kbd' in /proc/ioports and as
       `keyboard' in /proc/interrupts.	This should be fixed in the kernel, not in lsdev (as has indeed happened for this particular example).

       The program does however try to match lines by stripping anything after a space or open	parenthesis  from  the	name,  so  that  e.g.  the
       `serial'  lines	from /proc/interrupts match the `serial(set)' lines from /proc/ioports.  This attempt at DWIM might be considered a bug in
       itself.

       This program only shows the kernel's idea of what hardware is present, not what's actually physically available.

SEE ALSO
       procinfo(8).

AUTHOR
       Sander van Malssen <svm@kozmix.cistron.nl>

3rd Release							    1998-05-31								  LSDEV(8)