redhat man page for fmvj18x_cs

FMVJ18x_CS(4)						     Kernel Interfaces Manual						     FMVJ18x_CS(4)

y.

NAME
       fmvj18x_cs - Fujitsu FMV-J18x series device driver

SYNOPSIS
       insmod fmvj18x_cs.o [pc_debug=n] [fmvj18x_debug=n] [irq_list=i,j,...]

DESCRIPTION
       fmvj18x_cs  is the low-level Card Services driver for the Fujitsu FMV-J18x series PCMCIA ethernet adapter.  When this driver is attached to
       a card, it allocates the next available ethernet device (eth0..eth#).  This device name will be reported in the kernel log file, and passed
       on to cardmgr(8).

PARAMETERS
       pc_debug=n
	      Selects  the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.	A non-zero
	      value enables debugging.

       fmvj18x_debug=n
	      Selects the network debugging level.  The current default is 3; values of up to six increase reporting verbosity.

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

AUTHOR
       Shingo Fujimoto - Fujitsu Laboratories Ltd.  <Shingo@flab.fujitsu.co.jp>

THANKS
       Yutaka TAMIYA - Fujitsu Laboratories Ltd.

       Hideaki Yoda - Fujitsu Limited.

SEE ALSO
       cardmgr(8), pcmcia(5).

								1999/02/08 08:02:01						     FMVJ18x_CS(4)