osf1 man page for ogated

ogated(8)						      System Manager's Manual							 ogated(8)

NAME
       ogated - The gateway routing daemon

SYNOPSIS
       /usr/sbin/ogated [-t [i] [e] [r] [p] [u] [R] [H]] [logfile]

       The ogated daemon processes multiple routing protocols according to the configuration set in ogated.conf file.

FLAGS
       Logs all external errors due to EGP, exterior routing errors, and EGP state changes.  Traces all HELLO packets received.  Logs all internal
       errors and interior routing errors.  Traces all EGP packets sent and received.  Traces all RIP packets received.  Logs all routing changes.
       If  used alone, the -t flag starts the -i, -e, -r, and -p trace flags.  When used with another flag, the -t flag has no effect and only the
       accompanying flags are recognized. Note that when other flags are used, the -t flag must be used with them and must be the first flag given
       in  the command line.  Logs all routing updates sent.  The ogated daemon always logs fatal errors.  If no log file is specified and none of
       the preceding trace flags are set, all messages are sent to the /dev/null file.

DESCRIPTION
       The ogated daemon manages multiple routing protocols, including the Routing Information Protocol (RIP), Exterior  Gateway  Protocol  (EGP),
       and Local Network Protocol (HELLO).  The ogated process can be configured to perform all or any combination of these routing protocols.	It
       replaces daemons that use the HELLO routing protocol; for example, routed (8) and egpup (8).  The configuration for the ogated daemon is by
       default	stored	in the /etc/ogated.conf file, and can be changed at compile time in the file defs.h.  The ogated daemon stores its process
       ID in the /var/run/ogated.pid file.

       When a routing update indicates that the route in use is being deleted, the ogated daemon waits for 2 minutes before  deleting  the  route.
       Be aware that unpredictable results may occur when the ogated and routed daemons are run together on the same host.

       Start  the  ogated  daemon with a log file that you specify on the command line.  You can also enter one or more trace flags on the command
       line or specify the flags in the traceflags stanza of the ogated.conf configuration file.  When trace flags are	specified  without  a  log
       file, all trace output is sent to the controlling terminal.

       By default, the ogated daemon forks and detaches itself from the controlling terminal.

       When certain networks are restricted from using the Internet network, the ogated daemon uses both the syslogd daemon at the LOG_WARNING log
       level and the LOG_DAEMON facility to record all invalid networks.

       If you use the EGP when you supply the default route (by the RIP or HELLO gateway) and all EGP neighbors are lost, the default route is not
       advertised until at least one EGP neighbor is regained.

       The  RIP  both  propagates and listens to host routes.  This allows the ogated daemon to handle point-to-point links with consistency.  The
       ogated daemon also supports the RIP_TRACE commands.

       The ogated daemon detects changes made to the network interfaces and its own start-up flags while  it  is  running.   Thus,  you  need  not
       restart	the  ogated daemon if you change the configuration.  However, if the net mask, subnet mask, broadcast address, or interface metric
       is changed, use the ifconfig(8) command to mark the interface down and then up 30 seconds later.

       Subnet interfaces are supported.  Subnet information is passed through interfaces to other subnets of the same network.

       The ogated daemon listens to host and network REDIRECT signals.	The daemon tries to take an action for	its  own  internal  tables.   This
       action is parallel to the action the kernel takes on the REDIRECT signal.

       In  addition,  the  ogated  daemon  cancels (times out) all routes learned from REDIRECT signals in 6 minutes.  The daemon then deletes the
       route from the kernel routing tables, which keeps the routing tables consistent.

       No routing protocol announces routes learned from REDIRECT signals.

       The ogated EGP code verifies that all networks sent and received are valid class A, B, or C networks as specified by the EGP.   The  ogated
       daemon  does  not  contribute information about networks that do not meet EGP specifications.  If an EGP update packet contains information
       about a network that is not class A, B, or C, the ogated daemon considers the update to be in error and ignores it.

   Signals
       The ogated server performs the following actions when you use the kill(1) command to send it the SIGHUP and SIGINT signals.  When a  SIGHUP
       signal  is sent to a ogated daemon that was invoked with trace flags and a log file, tracing is toggled off and the log file is closed.	At
       this point the log file can be moved or deleted.  When the next SIGHUP signal is sent to the ogated daemon, tracing  is	toggled  on.   The
       ogated daemon reads the /etc/ogated.conf configuration file and sets the trace flags to those specified by the traceflags stanza.

	      If no traceflags stanza exists, tracing resumes and uses any trace flags specified on the command line.  Trace output is sent to the
	      log file specified on the command line.  The output is appended if the log file already exists, and the file is created if  it  does
	      not  exist.   Sending the ogated daemon a SIGINT signal causes a memory dump to be scheduled within the next 60 seconds.	The memory
	      dump is written to a file named /usr/tmp/ogated_dump.  The ogated daemon processes all pending routing updates before performing the
	      memory dump.

	      The  memory  dump contains a snapshot of the current ogated daemon status, including the interface configurations, EGP neighbor sta-
	      tus, and the routing tables.  If the /usr/tmp/ogated_dump file already exists, the memory dump is appended to the existing file.

   Internal Metrics for the ogated Daemon
       The ogated daemon stores all metrics internally as a time delay in milliseconds to preserve the granularity  of	HELLO  time  delays.   The
       internal delay ranges from 0 to 30,000 milliseconds, with 30,000 representing infinity.	Metrics from other protocols are translated to and
       from a time delay as they are received and transmitted.	EGP distances are not comparable to HELLO and RIP metrics but are stored  as  time
       delays internally for comparison with other EGP metrics.  The conversion factor between EGP distances and time delays is 100.

       RIP  and interface metrics are translated to and from the internal time delays with the use of the following translation tables.  The first
       two columns represent the time delay to RIP metric translation, while the second two columns represent the RIP metric to time delay  trans-
       lation.

	  Time Delay
       Minimum	 Maximum   RIP Metric	RIP Metric   Time Delay

	    0	      0 	0	     0		    0
	    1	    100 	1	     1		  100
	  101	    148 	2	     2		  148
	  149	    219 	3	     3		  219
	  220	    325 	4	     4		  325
	  326	    481 	5	     5		  481
	  482	    713 	6	     6		  713
	  714	   1057 	7	     7		 1057
	 1058	   1567 	8	     8		 1567
	 1568	   2322 	9	     9		 2322
	 2323	   3440        10	    10		 3440
	 3441	   5097        11	    11		 5097
	 5098	   7552        12	    12		 7552
	 7553	 11,190        13	    13	       11,190
       11,191	 16,579        14	    14	       16,579
       16,580	 24,564        15	    15	       24,564
       24,565	 30,000        16	    16	       30,000

CAUTIONS
       Unpredictable results may occur when the ogated and routed daemons are run together on the same host.

FILES
       Specifies the command path Contains the ogated configuration information Contains the ogated process ID Specifies the memory dump file

RELATED INFORMATION
       Commands: kill, routed(8)

       Files: ogated.conf(4) delim off

																	 ogated(8)