osf1 man page for ip6_setup

ip6_setup(8)						      System Manager's Manual						      ip6_setup(8)

NAME
       ip6_setup - IPv6 configuration program

SYNOPSIS
       /usr/sbin/ip6_setup

DESCRIPTION
       The ip6_setup utility allows you to configure the IPv6 networking software on your system.

       To run ip6_setup, enter the following command and then answer the questions: # ip6_setup

       You  must know your Internet Protocol Version 6 (IPv6) address. If your network uses subnet routing, you must know the subnet mask for your
       network.  The network manager should be able to provide you with the information that you need.

       After the ip6_setup command completes, the network services on the  system  can	be  restarted  manually  with  the  following  command:  #
       /usr/sbin/rcinet restart

       Before  you  restart  the  network  services  with  the preceding command, warn the users that the network services on the system are being
       removed.  File systems that were not mounted using the /etc/fstab file or the automount command must be unmounted with the unmount command.
       You must remount these file systems using the mount command after the network is started on your system.

       Alternatively, you can reboot the system with the following command: # /usr/sbin/shutdown -r now

FILES
       Specifies  the  host  name  file.  Specifies the environment variables that define the network configuration on your system.  Specifies the
       trusted hosts file.  Specifies the network name file.  Specifies Internet routing information.  Specifies Internet routing information.

SEE ALSO
       Commands: mount(8), rcinet(8)

       Files: gateways(4), hosts(4), hosts.equiv(4), networks(4), routes(4).

       Network Administration

																      ip6_setup(8)