osf1 man page for evmlogger

evmlogger(8)						      System Manager's Manual						      evmlogger(8)

NAME
       evmlogger - Event Manager logger

SYNOPSIS
       /usr/sbin/evmlogger [-c config_file] [-l log_file] [-o info_file]

OPTIONS
       Sets  the configuration file to config_file.  The default is /etc/evmlogger.conf.  Sets message output to log_file.  The default is stderr.
       When the logger starts it renames any previous message file by appending Specifies the name of an output file to hold  summary  details	of
       the current run session.

OPERANDS
       None

DESCRIPTION
       The  EVM  logger is started automatically by the EVM daemon at startup.	It reads from its configuration file /etc/evmlogger.conf  a set of
       definitions of event logs and forwarders, each with its own filter string.  The logger combines the individual filter strings to produce  a
       single  compound  string,  connects to the EVM daemon, and uses the compound filter string to establish its event subscription.	The logger
       then writes each incoming event to each of the event logs or forwarders whose individual filter string it matches.

       Event logs may be files or terminal devices. If a terminal device is given as a log, the logger automatically formats the  event  for  dis-
       play.  If a log is a file or any device other than a terminal, and the log is not specified as a formatted log, the logger writes events to
       it in canonical (binary) form.

       If a log is a disk file, the logger creates the file if necessary.  If the log name ends in the characters .dated, the logger replaces that
       suffix  with the current date in the form yyyymmdd, and begins a new file when the first event is written to the log each day.  A lock file
       with a suffix of .lck is created to protect the log file while it is being written.

       A log can be configured to start a new file when it reaches a certain size.  Successive generations of the same log are	given  the  suffix
       _n,  where  n is the generation number of the file.  A generation control file, with a suffix of .gen, is created to control the generation
       sequence.

       If the logger is writing to the log file, and the file becomes unavailable or unwritable for any reason, the logger switches to the  alter-
       nate log file if one has been configured.  Otherwise the log is disabled and the events are lost.

       If  the	logger	is  writing to the alternate log, and the error condition that caused it to switch has been cleared, you can revert to the
       primary path by using the evmreload -l command.

       If a forward command is specified, when any incoming event matches the forwarding filter the logger executes the command, piping the incom-
       ing event into its stdin stream.

       If an incoming event matches the suppression filter associated with an eventlog or forwarder, the event undergoes suppression consideration
       processing.  In the case of an eventlog this reduces the risk of wasting storage space by logging repeated instances of the same event, and
       for  a  forwarder it reduces the risk of sending replicated mail messages reporting the same event over a short period.	For a full discus-
       sion of the configuration values which control suppression see the evmlogger.conf(4) reference page.

       By default, the logger reads its configuration from /etc/evmlogger.conf. The -c flag can be used to override this. If the logger's configu-
       ration file is changed while the logger is running, the evmreload -l(8) command should be used to instruct it to reconfigure itself.

       The logger reconfigures itself when evmreload -l is run, or upon receipt of a SIGHUP signal.

       There is no limit to the number of instances of the logger which may be running, and individual users or applications can make use of it to
       monitor and log interesting events.  However, they must provide their own configuration files.

EXIT VALUES
       The following exit values are returned: Successful completion An error occurred

FILES
       Executable file Default logger configuration file Error log Run information file

SEE ALSO
       Commands: evmchmgr(8), evmd(8), evmget(1), evmreload(8), evmshow(1), evmstart(8), evmstop(8), kill(1)

       Files: evmlogger.conf(4)

       Event Management: EVM(5)

       EVM Events: EvmEvent(5)

       Event Filter: EvmFilter(5)
       delim off

																      evmlogger(8)